OWNER’S MANUAL Speaker Sound Bar Please read this manual carefully before operating your set and retain it for future reference. LSB306 www.lg.com HLS26W-NB_DUSALLK_ENG_0437.
Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started IMPORTANT SAFETY INSTRUCTIONS 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel.
Table of Contents Table of Contents 1 Getting Started 2 6 6 6 6 7 7 7 7 8 9 9 Safety Information Unique Features – Portable In – Speaker ez (easy) Setup Accessories Introduction – Symbols Used in this Manual Playable file – MP3/ WMA music file requirement Remote control Front panel Rear panel 2 Connecting 10 12 12 12 Mounting the main unit on a wall Optional Equipment Connection – AUDIO (PORT.
Table of Contents 4 Troubleshooting 21 Troubleshooting 5 Appendix 22 22 23 24 Maintenance – Handling the Unit Trademarks and Licenses Specifications 6 Warranty 25 Warranty 5 1 2 3 4 5 HLS26W-NB_DUSALLK_ENG_0437.
Getting Started Unique Features 1 Portable In Accessories Please check and identify the supplied accessories. Getting Started Listen to music from your portable device. (MP3, Notebook, etc) Speaker ez (easy) Setup Listen to sounds from TV, DVD or Digital device with vivid 2.0 ch mode. Remote control (1) Batteries (2) WALL BRACKET INSTALL GUIDE (1) Wall bracket (1) Optical cable (1) HLS26W-NB_DUSALLK_ENG_0437.
Getting Started Playable file Symbols Used in this Manual MP3/ WMA music file requirement ,,Note Indicates special notes and operating features. ,,Tip Indicates tip and hints for making the task easier. >>Caution Indicates cautions for preventing possible damages from abuse. HLS26W-NB_DUSALLK_ENG_0437.
Getting Started Remote control • • • • • • • • • • a • • • • • • • • • • 1 POWER: Switches the unit ON or OFF. AV SYNC: Synchronizes the audio and video. DOLBY DRC: Sets the Dobly DRC. 1 Getting Started MUTE: Mutes the sound. • • • • • • • • • • b • • • • • • • • • • FOLDER: Searches for a folder of MP3/ WMA files. When a USB containing MP3/ WMA files in several folders is being played, press FOLDER to select the folder you want to play. INPUT: Changes input sources.
Getting Started 9 Front panel B A 1 F E D C A Display D I STOP B USB Port E T PLAY / PAUSE C F FUNCTION Press it repeatedly to select other function. F – VOL + Adjusts speaker volume. Getting Started G G 1 STANDBY/ON Rear panel A B A PORT. (Portable) IN HLS26W-NB_DUSALLK_ENG_0437.
Connecting Mounting the main unit on a wall You can mount the main unit on a wall. Prepare screws and brackets. 2. When you mount it on a wall (concrete), use the wall plugs (Not supplied). You should drill some holes. A guide sheet (WALL BRACKET INSTALL GUIDE) is supplied to drill. Use the sheet to check the point to drill. Step 2 Preperation 2 Unit Connecting Wall bracket WALL BRACKET INSTALL GUIDE 1.
Connecting 3. Remove the WALL BRACKET INSTALL GUIDE. 4. Fix it with screws (not supplied) as shown in the illustration below. 11 5. Hang the main unit onto the bracket as shown below. Step 5 Step 4 2 Connecting ,,Note Detach the unit from the bracket as shown below. ,,Note You can arrange power cord cable with the bracket as shown below. Power cord cable Power cord cable >>Caution yy Do not hang onto the installed unit and avoid any impact to the unit.
Connecting Optional Equipment Connection AUDIO (PORT. IN) In Connection 2 OPTICAL In connection Connect an optical output of Unit (or Digital Device etc) to the OPTICAL IN 1/ 2 connector. OPTICAL IN Connection Connecting PORT.IN Connection MP3 player, etc... To the digital optical output jack of your component Speaker ez (easy) setup Listening to music from your portable player The unit can be used to play the music from many types of portable player or external devices. 1.
Connecting USB Playback Compatible USB Devices Insert USB memory device to the USB port on the front of the unit. yy MP3 Player : Flash type MP3 player. USB Connection 13 evices that support USB2.0 or yy USB Flash Drive : D USB1.1. yy The USB function of this unit does not support some USB devices. USB device requirement yy Do not extract the USB device while in operation. yy For a large capacity USB, it may take longer than a few minutes to be searched.
Operating Basic Operations Other Operations USB Operation DOLBY DRC (Dynamic Range Control) 1. Connect the USB device to the USB port. 2. Select the USB function by pressing INPUT. 3. Select a file you want to play by pressing C or V. To Stop 3 Do this Press Z Playback Press d/M Pause Press d/M Operating Skipping to the next/ previous file During playback, press C or V to go to the next file or to return to the beginning of the current file.
Operating Sleep Timer Setting Press SLEEP one or more times to select delay time between 10 and 180 minutes, after the unit will turn off. To check the remaining time, press SLEEP. To cancel the sleep function, press SLEEP repeatedly until “SLEEP 10” appears, and then press SLEEP once again while “SLEEP 10” is displayed. 15 Displaying file and input source You can display various information on the USB and OPTICAL IN 1/ 2 mode by pressing INFO..
Operating Sound adjustment ,,Note Setting the surround mode yy In some of surround modes, some speakers, there’s no sound or low sound. It depends on the mode of surround and the source of audio, it is not defective. This system has a number of pre-set surround sound fields. You can select a desired sound mode by using SOUND EFFECT. yy You may need to reset the surround mode, after switching the input, sometimes even after the sound file changed.
Operating Using Bluetooth technology About Bluetooth Bluetooth® is wireless communication technology for short range connection. The available range is within 10 meters. Bluetooth Profiles In order to use Bluetooth wireless technology, devices must be able to interpret certain profiles. This unit is compatible with following profile.
Operating Listening to sound through the Bluetooth devices Pairing your unit and Bluetooth device Before you start the pairing procedure, make sure the Bluetooth feature is turned on in to your Bluetooth device. Refer to your Bluetooth device’s user guide. Once a pairing operation is performed, it does not need to be performed again. 1. Select a function other than the Bluetooth function by using the INPUT. 3 2. Place the Bluetooth device to be connected to this unit within 3 feet of the unit.
Operating Checking the information of connected Bluetooth device This function is operated after pairing. You can check the Bluetooth information. Press and hold INFO. repeatedly. Bluetooth information is changed as follows. Local Bluetooth Device Address Device Name None ... 19 ,,Note yy This units does not be supported the Mono Headset Profile (Hands Free Profile) yy The sound may be interrupted when the connection interfered by the other electronic wave.
Operating Controlling a TV with the Supplied Remote Control You can control your TV using the buttons below. 3 Operating Button Operation 1 (TV POWER) Turn the TV on or off. AV/INPUT Switch the TV’s input source between the TV and other input sources. VOL +/– Adjust the volume of the TV. PR/CH W/S Scan up or down through memorized channels. ,,Note Depending on the unit being connected, you may not be able to control your TV using some of the buttons. HLS26W-NB_DUSALLK_ENG_0437.
Troubleshooting 21 Troubleshooting PROBLEM CORRECTION Plug in the power cord. No Power No sound Check the condition by operating other electronic devices. Press FUNCTION and check the selected function. The remote control is too far from the unit. The remote control does not work properly. Operate the remote control within about 23 ft (7m). There is an obstacle in the path of the remote control and the unit. Remove the obstacle. The battery in the remote control is exhausted.
Appendix Maintenance Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean yy Do not use volatile liquids such as insecticide spray near the unit. yy Wiping with strong pressure may damage the surface. yy Do not leave rubber or plastic products in contact with the unit for a long period of time.
Appendix 23 Trademarks and Licenses Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks & DTS Digital Surround and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
Appendix Specifications General Power requirements Refer to main label. Power consumption Refer to main label. Dimensions (W x H x D) (39 x 3 x 2) inches without foot Net Weight (Approx.) 5.1 lbs Operating temperature 41 °F to 95 °F (5 °C to 35 °C) Operating humidity 5 % to 90 % Bus Power Supply (USB) DC 5 V 0 500 mA Inputs DIGITAL IN (OPTICAL IN) 3 V (p-p), Optical jack x 2 PORT. IN 0.5Vrms (3.
Warranty 25 LG Electronics, Inc. Limited Warranty - USA This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or workmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date (“Date of Purchase”) of original consumer purchase of the product. This warranty is good only to the original purchaser of the product and effective only when used in the United States, excluding U.S. Territories.
LG Customer Information Center 1-800-243-0000 1-888-865-3026 USA, Consumer USA, Commercial Register your product Online! www.lg.com Printed in China HLS26W-NB_DUSALLK_ENG_0437.
