ENGLISH ESPAÑOL OWNER’S MANUAL DUAL FUEL RANGE Read this owner’s manual thoroughly before operating the appliance and keep it handy for reference at all times. WARNING If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. • Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. • WHAT TO DO IF YOU SMELL GAS - Do not try to light any appliance.
TABLE OF CONTENTS TABLE OF CONTENTS 3 PRODUCT FEATURES 31 4 IMPORTANT SAFETY INSTRUCTIONS 12 PRODUCT OVERVIEW 12 12 32 33 33 34 35 36 37 38 39 39 39 40 40 Parts Accessories 13 INSTALLATION 13 13 14 16 17 18 19 22 22 23 23 Product Specifications Before Installing the Range Installing the Range Optional Rear Filler Providing Adequate Gas Supply Connecting the Range to Gas Connecting Electricity Assembling the Surface Burners Checking Ignition of the Surface Burners Leveling the Range Engaging the A
PRODUCT FEATURES Multiple Gas Burner Sizes Choose a burner to fit the size of your cookware. Cooking multiple items at once is possible by using different burners at the same time. Self Clean & EasyClean® Useful for easy cleaning.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read and follow all instructions when using the range to prevent the risk of fire, electric shock, personal injury, or damage. This guide does not cover all possible conditions that may occur. Always contact your service agent or manufacturer about problems that you do not understand. Download this owner's manual at: http://www.lg.com This is the safety alert symbol.
IMPORTANT SAFETY INSTRUCTIONS 5 IMPORTANT SAFETY NOTICE Gas appliances can cause minor exposure to four of these substances, namely benzene, carbon monoxide, formaldehyde and soot, caused primarily by the imperfect combustion of natural or LP gas. Correctly adjusted burners, indicated by a bluish rather than a yellow flame, will minimize imperfect combustion. Exposure to these substances can be minimized by opening windows or using a ventilation fan or hood.
IMPORTANT SAFETY INSTRUCTIONS WARNING •• Never cover any slots, holes or passages in the oven bottom or cover an entire rack with materials such as aluminum foil. Doing so blocks air flow through the oven and may cause carbon monoxide poisoning. Aluminum foil linings may also trap heat, causing a fire hazard. • • Large scratches or impacts to glass doors can lead to broken or shattered glass.
IMPORTANT SAFETY INSTRUCTIONS Have the installer show you the location of the range gas shut-off valve and how to shut it off if necessary. WARNING •• Make sure your range is properly installed and grounded by a qualified installer, according to the installation instructions. Any adjustment and service should be performed only by qualified gas range installers or service technicians.
IMPORTANT SAFETY INSTRUCTIONS WARNING •• To shut off the gas supply to the range, close the range gas shutoff valve by turning it clockwise. Pressure regulator Adapter(1/2"-14 NPT) Gas Flow into Range Range gas shut-off valve 1/2" Adapter Installer: Inform the consumer of the location of the gas shut-off valve. •• After using your range for an extended period of time high floor temperatures may result. Many floor coverings will not withstand this kind of use.
IMPORTANT SAFETY INSTRUCTIONS •• Be sure that all surface controls are set in the Off position prior to supplying gas to the range. •• Never leave the surface burners unattended at high flame settings. Boilovers may cause smoke and greasy spillovers that may ignite. •• Always turn the knobs to the Lite position when igniting the top burners and make sure the burners have ignited. •• Control the top burner flame size so it does not extend beyond the edge of the cookware. Excessive flame is hazardous.
IMPORTANT SAFETY INSTRUCTIONS BROILER Always use a broiler pan and a grid for excess fat and grease drainage. This will help to reduce splatter, smoke, and flare-ups. WARNING When using your broiler, the temperature inside the oven will be extremely high.
IMPORTANT SAFETY INSTRUCTIONS 11 •• Do not line oven walls or bottom with aluminum foil or allow them to contact exposed heating elements in the oven. Doing so could create a fire hazard or cause damage to the range. •• Do not use the oven for storage. Items stored in the oven can catch on fire. •• Keep the oven free from grease buildup. •• Insert the oven racks in the desired position while the oven is cool.
PRODUCT OVERVIEW PRODUCT OVERVIEW Parts Cooktop Cooktop controller Oven mode knob Gasket Oven door Model & serial number plate Storage drawer Accessories Included Accessories Standard rack (3ea) Griddle (1ea) Rear filler (1ea) Owner’s manual (1ea) Screws (6ea) Anchors (6ea) Template (1ea) Anti-tip kit Anti-tip (1ea) LP nozzle conversion kit Optional Accessories Cooktop Nozzles (5ea) Installation Guide (1ea) Choke (1ea) Set screw (1ea) Grid Broiler pan NOTE • Contact LG Customer Service
INSTALLATION 13 ENGLISH INSTALLATION Product Specifications The appearance and specifications listed in this manual may vary due to constant product improvements. Oven Range Models LSD4913 Description Dual Fuel Range Electrical requirements 4.2 kW 120/240 VAC or 3.2 kW 120/208 VAC Exterior Dimensions 29 7/8" (W) x 37 7/8" (H) x 26 1/2" (D) (D with door closed) 75.7 cm (W) x 96 cm (H) x 67.3 cm (D) (D with door closed) Height to cooking surface 36" (91.4 cm) Net weight 181 lb (82.
INSTALLATION Installing the Range Unpacking and Moving the Range CAUTION •• You should use two or more people to move and install the range. (Excessive Weight Hazard) Failure to do so can result in back or other injury. •• Do not use the door handles to push or pull the range during installation or when moving the range out for cleaning or service. Doing so can result in serious damage to the door of the range. Remove packing material, tape and any temporary labels from your range before using.
INSTALLATION 15 ENGLISH Dimensions and Clearances NOTE Save for the use of the local electrical inspector. 24" (60.9 cm) 3" (7.6 cm) Acceptable gas pipe and electrical outlet area Normal counter top depth Counter 36" (91.4 cm) top height A Cabinet opening Wall 24" (60.9 cm) 36" (91.4 cm) 3" (7.6 cm) 25" (63.5 cm) 15" (38 cm) Cabinet Center 11" (28 cm) 6" (15.2 cm) 29.8" (75.7 cm) 4" (10 cm) 2.5" (6.3 cm) 5" (13 cm) 9" (23 cm) 4" (10 cm) 6" (15.2 cm) 9" (23 cm) 2.5" (6.
INSTALLATION Installing the Anti-tip Device Anti-tip bracket Screw must enter wood or concrete Wall plate Optional Rear Filler If the counter does not bridge the opening at the rear wall the rear filler kit, that is provided with the slide in range, will be needed. NOTE If the countertop depth is greater than 25" there will be a gap between the filler kit and the back wall. The anti-tip bracket is packaged with an installation template.
INSTALLATION 17 Your range is designed to operate at a pressure of 5" of water column on natural gas or 10" of water column on LP. Make sure you are supplying your range with the type of gas for which it is configured. This range is convertible for use on natural or LP gas. When using this range on LP gas, conversion must be made by a qualified LP installer before attempting to operate the range.
INSTALLATION Connecting the Range to Gas Flexible Connector Hookup Shut off the range gas supply valve before removing the old range and leave it off until the new hook-up has been completed. Because hard piping restricts movement of the range, the use of a CSA International-certified flexible metal appliance connector should be used unless local codes require a hard-piped connection. Never reuse an old connector when installing a new range.
INSTALLATION 19 Connecting the Power Cord Electrical Requirements This appliance must be installed and grounded on a branch circuit by a qualified technician in accordance with the National Electrical code ANSI/NFPA NO. 70 latest edition. All wiring should conform to Local and NEC codes. This range requires a single-phase, 3 wire, A.C 120/208 V or 120/240 V 60 Hz electrical system.
INSTALLATION 3-Wire Connection : Power Cord 4-Wire Connection : Power Cord WARNING WARNING •• The middle (neutral or ground) wire, which is white, of a 3-wire power cord or a 3-wire conduit has to be connected to the middle post of the main terminal block. The remaining two wires of the power cord or conduit have to be connected to the outside posts of the main terminal connection block. Failure to do so can result in electrical shock, severe personal injury or death.
INSTALLATION 21 4-Wire Connection: Conduit Install the conduit as follows: Remove the conduit connection plate from the rear of the oven and rotate it. The conduit hole (11/8") must be used. First, prepare the conduit wires as shown below. 3-Wire Conduit connection plate 4-Wire or Ground wire Second, install the conduit strain relief. For conduit installations, purchase a strain relief and insert it in the 11/8 in. (2.8 cm) conduit hole.
INSTALLATION Assembling the Surface Burners Quality of Flames The combustion quality of the burner flames needs to be confirmed visually. A Yellow flames - Call for service. CAUTION Do not operate the burners without all parts in place. Place the burner caps and heads on the cooktop. Make sure that the caps and heads are placed in the correct locations. There is one small, one medium, one large, one oval(center), and one extra large burner head and cap.
INSTALLATION 23 To check ignition of the Bake burner, follow the steps below: 1 Remove all packing materials from inside the oven cavity. 2 Turn oven mode knob to select Bake. 350 °F appears in the display. 3 Press Start. It may take between 30 and 90 seconds for the burner to start heating. To check ignition of the Broil burner, follow the steps below: 1 Turn oven mode knob to select Broil High. Hi appears in the display. 2 Make sure the door is closed. 3 Press Start.
OPERATION OPERATION Gas Surface Burners Before Use Read all instructions before using. Make sure that all burners are properly placed. CAUTION WHAT TO DO IF YOU SMELL GAS •• Open windows. •• Do not try to light any appliance. •• Do not touch any electrical switch. •• Do not use any phone in your building. •• Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions. •• If you cannot reach your gas supplier, call the fire department.
OPERATION 25 Using the Gas Surface Burners Your gas range cooktop has four or five sealed gas burners, depending on the model. These can be assembled and separated. Follow the guide below. 1 Be sure that all of the surface burners and grates are placed in the correct positions. 2 Place cookware on the grate. 3 Push the control knob and turn to the Lite position. 4 1 1 2 3 Medium and Large Burners The medium and large burners are the primary burners for most cooking.
OPERATION In Case of Power Failure Using a Wok In case of a power failure, you can light the gas surface burners on your range with a match. If using a wok, use a 14-inch or smaller flat-bottomed piece of wok. Make sure that the wok bottom sits flat on the grate. Surface burners in use when an electrical power failure occurs will continue to operate normally. 1 Hold a lit match to the burner, then push in the control knob. 2 Turn the control knob to the Lo position.
OPERATION 27 Do not place stove-top grills on the burner. Preheat the griddle according to the guide below and adjust for the desired setting. Preheat Conditions Cook Setting - 5 (MED) Pancakes HI 5 min. HI Hamburgers HI 5 min. HI Fried Eggs HI 5 min. HI Bacon HI 5 min. HI Breakfast Sausage Links HI 5 min. HI Hot Sandwiches HI 5 min. HI Type of Food Warming Tortillas CAUTION Do not use stove top grills on the surface burners.
OPERATION The Oven Do not block, touch or place items around the oven vent during cooking. Before Use Your oven is vented through ducts at the center above the burner grate. Do not block the oven vent when cooking to allow for proper air flow. Do not touch vent openings or nearby surfaces during any cooking operation. Read all instructions before using. Make sure the electrical power cord and the gas valve are properly connected.
OPERATION 29 ENGLISH Control Panel Overview 1 Hold 3 seconds 2 3 4 5 6 7 8 1 Smart DiagnosisTM •• Use during the Smart Diagnosis feature. 2 Cook Time Press the button to set the desired amount of time for food to cook. The oven shuts off when the set cooking time runs out. 3 Start Time Press the button to set the delayed timed cook. The oven starts at the set time. 4 Clock / Lock Out 9 10 6 Oven Light Press the button to turn oven light on or off.
OPERATION Changing Oven Settings Clock The clock must be set to the correct time of day in order for the automatic oven timing functions to work properly. 1 Set the oven mode knob to the Off position. 2 Press Clock. CLO shows in the display. 3 Press plus(+) or minus(-) to select the desired time. Plus(+) to increase the time and minus(-) to decrease the time. 4 Press Start to enter the time and start the clock.
OPERATION 31 Settings The Timer On/Off serves as an extra timer in the kitchen that beeps when the set time has run out. It does not start or stop cooking. Set the oven mode knob to the Off position. Press Setting key repeatedly to toggle through and change oven settings. The Timer On/Off feature can be used during any of the oven control functions. The Settings key allows you to: Setting the Timer 1 Set the oven mode knob to the Off position. 2 Press the Timer On/Off.
OPERATION Adjusting the Oven Thermostat Adjusting the Beeper Volume Your new oven may cook differently from the one it replaced. Use your new oven for a few weeks to become more familiar with it before changing the temperature settings. If after familiarizing yourself with the new oven, you still think that it is too hot or too cold, you can adjust the oven thermostat yourself. 1 Set the oven mode knob to the Off position. 2 Press Setting repeatedly until BEEP appears in the display.
OPERATION 33 Cook Time (Timed Cook) The automatic timer of the Delayed Timed Cook function turns the oven on and off at the time you select. This feature can be used with the Bake, Conv. Bake and Conv. Roast modes. Set the oven to cook for a specific length of time using the Timed Cook feature. This feature can only be used with the Bake, Conv. Bake and Conv. Roast modes.
OPERATION Removing and Replacing the Oven Racks CAUTION •• Replace the oven racks before turning the oven on to prevent burns. •• Do not cover the racks with aluminum foil, or any other material, or place anything on the bottom of the oven. Doing so will result in poor baking performance and may damage the oven bottom. •• Only arrange oven racks when the oven is cool. Removing Racks 1 While wearing oven mitts, grasp the oven rack*. 2 Pull the rack straight out until it stops.
OPERATION 35 The convection system uses a fan to circulate the heat evenly within the oven. Improved heat distribution allows for even cooking and excellent results while cooking with single or multiple racks. Setting the Convection Function (example, 375 °F) 1 Turn the oven mode knob to select the Conv. Bake or Conv. Roast. 2 Set the oven temperature: for example, press plus(+) until 375 °F appears in the display. 3 Press Start. The display shows Conv. Bake or Conv.
OPERATION Recommended Baking and Roasting Guide Baking rack guide Baking results will be better if baking pans are centered in the oven as much as possible. If cooking on multiple racks, place the oven racks in the positions shown.
OPERATION 37 Smoking The Broil function uses intense heat from the upper heating element to cook food. Broiling works best for tender cuts of meat, fish, and thinly cut vegetables. Some models may feature a hybrid broiler consisting of an inner broiler that utilizes a carbon heating element which provides instantaneous heat, and a traditional outer broiling element. During normal broiler operation, it is normal for either element to cycle off intermittently.
OPERATION Recommended Broiling Guide The size, weight, thickness, starting temperature, and your preference of doneness will affect broiling times. This guide is based on meats at refrigerator temperature. For best results when broiling, use a pan designed for broiling. Food Quantity and/or Thickness Rack First Side Position (minutes) Second Side (minutes) Comments Space evenly. For 1-4 patties, use Speed Broil. For more than 4 patties, use Broil. Ground Beef Well done 1 lb.
OPERATION 39 Beef •• Steaks and chops should always be allowed to rest for five minutes before being cut into and eaten. This allows the heat to distribute evenly through the food and creates a more tender and juicy result. •• Pieces of meat that are thicker than two inches should be removed from the refrigerator 30 minutes prior to cooking. This will help them cook more quickly and evenly, and will produce less smoke when broiling.
OPERATION Remote Start Sabbath Mode If the appliance is registered on a home Wi-Fi network, this function starts or stops the pre-heating function of the appliance. Follow the instructions on page 41 to register the appliance on the network. Sabbath mode is used on the Jewish Sabbath and Holidays. While the oven is in Sabbath mode, the temperature cannot be changed and the timer, light, and alarm functions are disabled. If the oven light is on when the oven is put in Sabbath mode, it will remain on.
SMART FUNCTIONS 41 LG ThinQ Application Before Using LG ThinQ Application 1 •• If the distance between the appliance and the wireless router is too far, the signal becomes weak. It takes long time to register or fails to install the application. This feature is only available on models with the f or logo. The LG ThinQ application allows you to communicate with the appliance using a smartphone.
SMART FUNCTIONS NOTE •• The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.) •• Smartphone user interface (UI) may vary depending on the mobile operating system (OS) and the manufacturer. •• If the security protocol of the router is set to WEP, network setup may fail. Change the security protocol (WPA2 is recommended), and register the product again.
SMART FUNCTIONS 43 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
SMART FUNCTIONS Smart Diagnosis™ Feature This feature is only available on models with the c or d icon. Use this feature to help you diagnose and solve problems with your appliance. NOTE •• For reasons not attributable to LGE’s negligence, the service may not operate due to external factors such as, but not limited to, WiFi unavailability, Wi-Fi disconnection, local app store policy, or app unavailability.
MAINTENANCE 45 CAUTION •• Do not clean this appliance with bleach. •• To prevent burns, wait until the cooktop has cooled down before touching any of its parts. •• Always wear gloves when cleaning the cooktop. Removing and Replacing the Gas Surface Burners Grates and burner heads/caps can be removed for care and cleaning. Cleaning Burner Heads/Caps For even and unhampered flame, the slits in the burner heads must be kept clean at all times.
MAINTENANCE Burner Grates Cleaning the Cooktop Surface The range consists of three separate professionalstyle grates. For maximum stability, these grates should only be used when in their proper position. The center grate can be interchanged from front to back. Side grate Center grate Side grate CAUTION •• To avoid burns, do not clean the cooktop surface until it has cooled. •• Do not lift the cooktop surface. Lifting the cooktop surface can lead to damage and improper operation of the range.
MAINTENANCE 47 It is best to clean the manifold panel after each use of the range. For cleaning, use a damp cloth and mild soapy water or a 50/50 solution of vinegar and water. For rinsing, use clean water and polish dry with a soft cloth. CAUTION •• Do not use abrasive cleansers, strong liquid cleaners, plastic scouring pads or oven cleaners on the manifold panel. Doing so will damage the finish. •• Do not try to bend the knobs by pulling them up or down, and do not hang a towel or other objects on them.
MAINTENANCE CAUTION Do not use harsh cleaners or harsh abrasive cleaning materials on the outside of the oven door. Doing so can cause damage. Don’t hand clean oven door gasket Do hand clean door Door Care Instructions Most oven doors contain glass that can break. CAUTION •• Do not close the oven door until all the oven racks are fully in place. •• Do not hit the glass with pots, pans, or any other object.
MAINTENANCE 49 Suggested Cleaning Method Example of Oven Soiling Soil Pattern Types of Soils Common Food Items That Can Soil Your Oven Small drops or spots Cheese or other ingredients Pizza Steaks, broiled EasyClean® Fish, broiled Light splatter Fat/grease Medium to heavy splatter Fat/grease Meat roasted at high temperatures Filling or sugar based soils Pies Cream or tomato sauce Casseroles Self Clean* Drops or spots Meat roasted at low temperatures * The Self Clean cycle can be used f
MAINTENANCE 5 Spray or pour the remaining water (8 oz or 240 ml) onto the bottom center of the oven cavity. The indentation on the oven bottom should be fully covered to submerge all soils. Add water if necessary. NOTE If cleaning multiple ovens, use an entire bottle of water to clean each oven. Do not spray water directly on the door. Doing so will result in water dripping to the floor. 6 Close the oven door. Turn the oven mode knob to select EasyClean®. Press Start.
MAINTENANCE 51 The Self Clean cycle uses extremely hot temperatures to clean the oven cavity. While running the Self Clean cycle, you may notice smoking or an odor. This is normal; especially if the oven is heavily soiled. During Self Clean, the kitchen should be well ventilated to minimize the odors from cleaning. Before Starting Self Clean •• Remove the oven racks, broiler pan, broiler grid, all cookware, aluminum foil or any other material from the oven.
MAINTENANCE CAUTION Do not force the oven door open when the lock icon is displayed. The oven door remains locked until the oven temperature has cooled. Forcing the door open will damage the door. Setting Self Clean with a Delayed Start 1 Remove all racks and accessories from the oven. 2 Turn the oven mode knob to select Self Clean. The oven defaults to the recommended four-hour self clean for a moderately soiled oven. Press plus(+) or minus(-) to select a self clean time from 3 to 5 hours.
MAINTENANCE 53 The oven light is a standard 40-watt appliance bulb. It turns on when the oven door is open. When the oven door is closed, press Light to turn it on or off. Removing and Replacing the Lift-Off Oven Doors and Drawer WARNING •• Make sure that the oven and bulb are cool. •• Disconnect the electrical power to the range at the main fuse or circuit breaker panel. Failure to do so can result in severe personal injury, death, or electrical shock. 1 Unplug the range or disconnect power.
MAINTENANCE Replacing the Door Removing the Drawer 1 Firmly grasp both sides of the door at the top. 2 With the door at the same angle as the removal position, seat the indentation of the hinge arms into the bottom edge of the hinge slots. The notch in the hinge arms must be fully seated into the bottom edge of the slots. Hinge arm Bottom edge of slot CAUTION Disconnect the electrical power to the range at the main fuse or circuit breaker panel.
TROUBLESHOOTING 55 Can I use aluminum foil to catch drippings in my oven cavity? FAQs Never use aluminum foil to line the bottom or sides of the oven or the warming drawer. The foil will melt and stick to the bottom surface of the oven and will not be removable. Use a sheet pan placed on a lower oven rack to catch drippings instead. (If foil has already melted onto the bottom of the oven, it will not interfere with the oven's performance.
TROUBLESHOOTING Why aren't the function buttons working? Make sure that the range is not in Lockout mode. The will show in the display if Lockout is activated. lock To deactivate Lockout, press Clock for three seconds. The unlock melody sounds and Loc appears in the display until the controls are unlocked. My range is still dirty after running the EasyClean® cycle. What else should I do? The EasyClean® cycle only helps to loosen light soils in your oven range to assist in hand-cleaning of your oven.
TROUBLESHOOTING 57 Before you call for service, review this list. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. Symptoms Top burners do not light or do not burn evenly. Possible Cause / Solutions •• Make sure that the electrical plug is inserted into a live, properly grounded outlet. •• Remove the burners and clean them. Check the electrode area for burnt on food or grease.
TROUBLESHOOTING Symptoms Possible Cause / Solutions The oven door does not open after a Self Clean cycle. The oven temperature is too high. Wait up to one hour for it to cool down. The oven door is not clean after a Self Clean cycle. •• Incorrect oven control settings. See Self Clean in the MAINTENANCE section. •• The oven was heavily soiled. Clean up heavy spills before beginning the Self Clean cycle. Heavily soiled ovens may need either a longer Self Clean or two Self Clean cycles.
TROUBLESHOOTING 59 Possible Cause / Solutions •• The password for the Wi-Fi network was entered incorrectly. - Delete your home Wi-Fi network and begin the registration process again. •• Mobile data for your smartphone is turned on. - Turn off the Mobile data on your smartphone before registering the appliance. Trouble connecting appliance and smartphone to Wi-Fi network •• The wireless network name (SSID) is set incorrectly.
LIMITED WARRANTY LIMITED WARRANTY (USA) ARBITRATION NOTICE: THIS LIMITED WARRANTY CONTAINS AN ARBITRATION PROVISION THAT REQUIRES YOU AND LG TO RESOLVE DISPUTES BY BINDING ARBITRATION INSTEAD OF IN COURT, UNLESS YOU CHOOSE TO OPT OUT. IN ARBITRATION, CLASS ACTIONS AND JURY TRIALS ARE NOT PERMITTED. PLEASE SEE THE SECTION TITLED “PROCEDURE FOR RESOLVING DISPUTES” BELOW.
LIMITED WARRANTY 61 •• Replacement of light bulbs, filters, fuses or any other consumable parts. •• When Product is used for other than normal and proper household use (e.g. commercial or industrial use, offices, and recreational facilities or vehicles) or contrary to the instructions outlined in the Product’s owner’s manual. •• Costs associated with removal and reinstallation of your Product for repairs. •• Cost of conversion of the Product from natural gas to LP gas or vice versa.
LIMITED WARRANTY Problem Cause Prevention •• Knobs melt Improper usage •• Do not leave door at stop position during Broil/Bake mode or right after cooking. •• Oven or racks are stained after using aluminum foil Aluminum foil has melted in the oven •• Never cover the oven bottom or cover an entire rack with materials such as aluminum foil. •• If the foil has already melted onto the oven, it will not affect the performance of the oven.
LIMITED WARRANTY 63 •• Flames too bigon converted cooktop (NP LP) Cause Prevention The installer missed part of the conversion. (Check 3 parts: regulator, cooktop valve, broil/ bake valve.) regulator cooktop valve •• Refer to installation manual broil/bake valve 17K / 18.5K burner needs choke. •• Check with installer first •• Refer to installation manual Burner cap Set Screw •• Check with installer first Choke Burner base choke •• Flame is too small or too large 1.
LIMITED WARRANTY PROCEDURE FOR RESOLVING DISPUTES: ALL DISPUTES BETWEEN YOU AND LG ARISING OUT OF OR RELATING IN ANY WAY TO THIS LIMITED WARRANTY OR THE PRODUCT SHALL BE RESOLVED EXCLUSIVELY THROUGH BINDING ARBITRATION, AND NOT IN A COURT OF GENERAL JURISDICTION. BINDING ARBITRATION MEANS THAT YOU AND LG ARE EACH WAIVING THE RIGHT TO A JURY TRIAL AND TO BRING OR PARTICIPATE IN A CLASS ACTION. Definitions. For the purposes of this section, references to “LG” mean LG Electronics U.S.A., Inc.
LIMITED WARRANTY 65 Opt Out. You may opt out of this dispute resolution procedure. If you opt out, neither you nor LG can require the other to participate in an arbitration proceeding. To opt out, you must send notice to LG no later than 30 calendar days from the date of the first consumer purchaser’s purchase of the product by either: (i) sending an e-mail to optout@lge.com, with the subject line: “Arbitration Opt Out” or (ii) calling 1-800-980-2973.
Memo MEMO
ESPAÑOL MANUAL DEL PROPIETARIO COCINA DOBLE COMBUSTIBLE Lea detenidamente el manual del propietario antes de poner el aparto en funcionamiento y consérvelo a mano en todo momento para su referencia. ADVERTENCIA Si no sigue con exactitud la información de este manual, un incendio o descarga eléctrica podrían ser caudados, daños a la propiedad, lesiones personales o la muerte.
2 ÍNDICE ÍNDICE 3 CARACTERÍSTICAS DEL PRODUCTO 4 INSTRUCCIONES IMPORTANTES 32 33 DE SEGURIDAD 33 12 DESCRIPCIÓN GENERAL DEL PRODUCTO 12 12 34 35 36 Piezas Accesorios 37 38 39 39 39 40 40 13 INSTALACIÓN 13 13 14 16 17 18 19 22 22 23 23 Especificaciones del producto Antes de instalar la cocina Instalación de la cocina Barra Trasera Opcional Cómo brindar el suministro adecuado de gas Conexión de la cocina al gas Conexión de la electricidad Ensamblaje de los quemadores de superficie Verificación de
CARACTERÍSTICAS DEL PRODUCTO 3 CARACTERÍSTICAS DEL PRODUCTO Varios tamaños de quemadores de gas Elija un quemador que coincida con el tamaño de su batería de cocina. Es posible cocinar varias cosas a la vez si utiliza más de un quemador. ESPAÑOL Autolimpieza e EasyClean® Útiles para una limpieza sencilla.
4 INSTRUCCIONES IMPORTANTES DE SEGURIDAD INSTRUCCIONES IMPORTANTES DE SEGURIDAD Lea y siga todas las instrucciones cuando utilice la cocina para evitar riesgos de incendios, descargas eléctricas, lesiones personales o daños. Esta guía no incluye todas las situaciones posibles que podrían ocurrir. Siempre comuníquese con su agente de servicio técnico o con el fabricante cuando haya problemas que no comprenda. Descargue este manual del propietario en: http://www.lg.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 5 AVISO IMPORTANTE DE SEGURIDAD Los aparatos de gas causan exposición mínima a cuatro de estas sustancias: benceno, monóxido de carbono, formaldehido y hollín, causados primordialmente por la combustión incompleta de gas natural o gas LP (Propano). Los quemadores bien ajustados, indicados por una llama azul en vez de una llama amarilla, minimizarán la combustión incompleta.
6 INSTRUCCIONES IMPORTANTES DE SEGURIDAD ADVERTENCIA •• Nunca obstruya el flujo del aire de combustión y de ventilación al bloquear la ventilación del horno o las entradas de aire. Al hacerlo, se restringe la entrada de aire al quemador y esto puede provocar envenenamiento por monóxido de carbono. •• Nunca cubra ranuras, aberturas ni conductos del fondo del horno ni un estante completo con materiales como papel de aluminio.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 7 PRECAUCIONES DE SEGURIDAD PARA LA INSTALACIÓN Pida que el instalador le muestre el lugar de la válvula que corta el gas de la cocina y cómo apagarla si fuera necesario. ADVERTENCIA ESPAÑOL •• Haga que un instalador calificado instale y conecte a tierra su cocina de acuerdo con las Instrucciones de instalación. Cualquier ajuste o servicio debe ser completado solo por instaladores de cocinas de gas calificados o técnicos de servicio.
8 INSTRUCCIONES IMPORTANTES DE SEGURIDAD ADVERTENCIA •• Si desea cerrar el paso del gas a la estufa, cierre la válvula de la tubería principal de gas girándola hacia la derecha. Regulador de presión Adaptador (1/2"-14 NPT) Flujo de gas a la estufa Válvula de corte de gas 1/2" Adaptador Instalador: Informe al consumidor la ubicación de la válvula de corte del gas. •• Después del uso prolongado de la cocina, se pueden producir temperaturas altas en el piso.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 9 PRECAUCIÓN ESPAÑOL •• Asegúrese de que todos los controles de superficie estén en la posición Off antes de suministrar gas a la cocina. •• Nunca deje los quemadores de superficie sin supervisión en ajustes de altas temperaturas. Las salpicaduras o los derrames dejados sobre la cocina pueden arder. • • Coloque siempre las perillas en la posición Lite al encender los quemadores superiores y asegúrese de que se hayan encendido.
10 INSTRUCCIONES IMPORTANTES DE SEGURIDAD ASADOR Siempre use una asadera con rejilla para drenar el exceso de grasa. Esto ayuda a reducir las salpicaduras, el humo y las llamaradas ocasionales. ADVERTENCIA Al usar el asador, la temperatura interior del horno será muy elevada. Tome precauciones para evitar posibles quemaduras.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 11 ADVERTENCIA SUGERENCIAS PARA AHORRAR ENERGÍA •• Cocinar en varios estantes ahorra tiempo y energía. Siempre que sea posible, cocine alimentos que requieran la misma temperatura de cocción en un único horno. •• Para un desempeño óptimo y ahorro de energía, siga las pautas de la página 36 para colocar correctamente los estantes y las bandejas.
12 DESCRIPCIÓN GENERAL DEL PRODUCTO DESCRIPCIÓN GENERAL DEL PRODUCTO Piezas Placa de cocción Controlador de la placa de cocción Perilla de modo del horno Junta Puerta del horno Placa de modelo y número de serie Cajón de almacenamiento Accesorios Accesorios incluidos Estante estándar (3 c/u) Parrilla (1 c/u) Relleno trasero (1 c/u) Manual del propietario (1 c/u) Tornillos (6 c/u) Anclajes (6 c/u) Plantilla (1 c/u) Kit antivuelco Antivuelco (1 c/u) Kit de conversión para boquilla de LP Accesorio
INSTALACIÓN 13 INSTALACIÓN Especificaciones del producto La apariencia y las especificaciones detalladas en este manual podrían variar debido a mejoras constantes en el producto. LSD4913 Descripción Cocina doble combustible Requisitos eléctricos 4.2 kW 120/240 VAC o 3.
14 INSTALACIÓN Instalación de la cocina Desembalaje y traslado de la cocina PRECAUCIÓN •• Se necesitan dos o más personas para mover e instalar la cocina. (Peligro de peso excesivo) Si no se cumple con esto, se pueden producir lesiones en la espalda u otras lesiones. •• No utilice las manijas de la puerta para empujar ni para tirar de la cocina durante la instalación o al mover la cocina para tareas de limpieza o reparaciones. Hacerlo podría causar daños graves a la puerta de la cocina.
INSTALACIÓN 15 Dimensiones y espacios libres NOTA Guarde para el uso del inspector eléctrico local. Área aceptable para la tubería de gas y la toma de corriente.
16 INSTALACIÓN Instalación del dispositivo antivuelco Soporte antivuelco El tornillo debe atravesar la madera o el hormigón Placa de pared Se incluye un soporte antivuelco con una plantilla de instalación. Las instrucciones incluyen la información necesaria para completar la instalación. Lea y siga la hoja de instrucciones de instalación de la cocina.
INSTALACIÓN 17 Cómo brindar el suministro adecuado de gas Asegúrese de suministrar a su cocina el tipo de gas para el cual está configurada. Esta cocina es convertible para uso con gas natural o LP. Al usar la cocina con gas LP, un instalador de gas LP calificado debe realizar la conversión antes de intentar hacer funcionar la cocina. Para un funcionamiento adecuado, la presión del gas natural suministrada al regulador debe estar entre 5" y 13" de columna de agua.
18 INSTALACIÓN Conexión de la cocina al gas Montaje del conector flexible Corte el suministro de gas a la cocina con la válvula antes de retirar la cocina antigua y déjela de ese modo hasta que se haya completado la instalación nueva. Debido a que las tuberías rígidas restringen el movimiento de la cocina, se debe utilizar un conector metálico flexible con certificación internacional CSA, excepto en caso de que los códigos locales requieran una conexión de tubería rígida.
INSTALACIÓN 19 Conexión de la electricidad Requisitos eléctricos Todo el cableado debe cumplir con el código Local y el código NEC. Esta cocina requiere un cable monofásico de 3 hilos, 120/208 VCA o un sistema eléctrico de 120/240 V 60 Hz. Utilice únicamente un cable para cocina de 3 o 4 conductores homologados por UL con bornes de circuito cerrado, talones de cable pala de extremo abierto o una terminación similar. No instale el cable de alimentación sin un pasacables.
20 INSTALACIÓN Conexión con cable de 3 hilos: Cable de alimentación ADVERTENCIA •• El hilo del medio (neutro o tierra), que es blanco, de un cable de alimentación de 3 hilos o un conducto de 3 hilos se debe conectar al poste medio del bloque de bornes principal. Los dos hilos restantes del cable de alimentación o del conducto se deben conectar a los postes exteriores del bloque de bornes principal. El no hacerlo podría causar lesiones personales graves, descargas eléctricas o la muerte.
INSTALACIÓN 21 Conexión con cable de 3 hilos: Conducto Conexión con cable de 4 hilos: Conducto Instale el conducto de la siguiente manera: En primer lugar, prepare los hilos del conducto como se indica a continuación. 3 hilos 1" (2,5 cm) Placa de conexión del conducto 4 hilos 31/2" (8,9 cm) 1" 3/8" (2,5 cm) (0,9 cm) 3/8" (0,9 cm) 31/2" (8,9 cm) 3/4" (1,9 cm) o Cable de conexión a tierra 23/4" (6,9 cm) En segundo lugar, instale el pasacables del conducto.
22 INSTALACIÓN Ensamblaje de los quemadores de superficie Calidad de las llamas Debe confirmar visualmente la calidad de combustión de las llamas de los quemadores. PRECAUCIÓN A Llamas amarillas- Solicite mantenimiento. No haga funcionar los quemadores sin todas las piezas colocadas. Coloque las tapas de los quemadores y los cabezales sobre la placa de cocción. Asegúrese de que las tapas y los cabezales estén en las ubicaciones correctas.
INSTALACIÓN 23 Verificación de funcionamiento de los quemadores para hornear / asar Para verificar el encendido del quemador para hornear, siga los pasos a continuación: Retire todos los materiales de embalaje del interior de la cavidad del horno. 2 Gire la perilla de modo del horno hasta seleccionar el modo Bake. 350 °F aparece en la pantalla. 3 Presione Start. Nivele la cocina ajustando las patas de nivelación.
24 FUNCIONAMIENTO FUNCIONAMIENTO Quemadores de superficie a gas Antes de usar Lea todas las instrucciones antes de usar. Asegúrese de que todos los quemadores estén ubicados adecuadamente. PRECAUCIÓN QUÉ HACER SI HUELE GAS •• Abra las ventanas. •• No intente encender ningún aparato. •• No toque ningún interruptor eléctrico. •• No use ningún teléfono en su edificio. •• Llame a su compañía de gas inmediatamente desde el teléfono de un vecino. Siga las instrucciones de la compañía de gas.
FUNCIONAMIENTO 25 Ubicaciones de los quemadores La placa de cocción de su cocina de gas tiene cuatro o cinco quemadores a gas sellados, según el modelo. Estos se pueden ensamblar y separar. Siga la guía a continuación. 1 1 2 3 Asegúrese de que todos los quemadores de superficie y las rejillas estén colocados en las posiciones adecuadas. 2 Coloque la batería de cocina sobre la rejilla. 3 Empuje la perilla de control y gire hacia la posición Lite.
26 FUNCIONAMIENTO En caso de apagón Uso de un wok En caso de corte de energía eléctrica, puede encender los quemadores de superficie de su cocina con una cerilla. Si utiliza un wok, use uno de 14 pulgadas o menos con fondo plano. Asegúrese de que la base del wok quede nivelada sobre la rejilla. Los quemadores de superficie que estaban en uso al producirse el apagón seguirán funcionando normalmente. 1 Sostenga una cerilla encendida cerca del quemador, luego empuje la perilla.
FUNCIONAMIENTO 27 Uso de las rejillas en superficie No coloque rejillas sobre el quemador. Precaliente la parrilla según la guía a continuación y ajuste para lograr la configuración deseada.
28 FUNCIONAMIENTO El horno No bloquee, toque ni coloque elementos alrededor de la ventilación del horno durante la cocción. Antes de usar Su horno se ventila a través de conductos en el centro sobre el quemador. No bloquee la ventilación del horno cuando cocine para permitir un flujo de aire adecuado. No toque las aberturas de ventilación ni las superficies cercanas durante cualquier operación de cocina. Lea todas las instrucciones antes de usar.
FUNCIONAMIENTO 29 Descripción general del panel de control 1 ESPAÑOL Hold 3 seconds 2 3 4 5 6 7 8 1 Smart DiagnosisTM •• Uso durante la función Smart Diagnosis. 2 Cook Time (Tiempo de cocción) Presione el botón para configurar la cantidad de tiempo que se desea cocinar la comida. El horno se apaga cuando se agota el tiempo de cocción establecido. 3 Start Time (Hora de inicio) Presione el botón para configurar la cocción temporizada retardada. El horno se inicia a la hora configurada.
30 FUNCIONAMIENTO Cambio de las configuraciones del horno Clock (Reloj) El reloj se debe configurar en la hora correcta del día para que las funciones automáticas del temporizador del horno funcionen de manera adecuada. 1 Coloque la perilla de modo del horno en la posición Off. 2 Presione Clock. CLO se muestra en la pantalla. 3 Presione los botones más(+) o menos(-) para seleccionar la hora deseada. Más(+) para incrementar el tiempo y menos(-) para disminuir el tiempo.
FUNCIONAMIENTO 31 Timer On/Off (Temporizador encendido/apagado) La función Temporizador encendido/apagado se puede utilizar durante cualquiera de las funciones de control del horno. Configuración de la Temporizador 1 Coloque la perilla de modo del horno en la posición Off. 2 Presione Timer On/Off. En la pantalla aparece 0:00 con las letras HR adentro y parpadea Timer. 3 Presione los botones más(+) o menos(-) para seleccionar el tiempo deseado.
32 FUNCIONAMIENTO Ajuste del termostato del horno Ajuste del volumen del indicador sonoro El horno nuevo podría cocinar de manera diferente a su horno anterior. Use el horno nuevo durante algunas semanas para familiarizarse con él antes de cambiar los ajustes de temperatura. Si, después de familiarizarse con el horno nuevo, sigue pensando que la temperatura es muy elevada o muy baja, puede ajustar el termostato del horno. 1 Coloque la perilla de modo del horno en la posición Off.
FUNCIONAMIENTO 33 Start Time [Delayed Timed Cook] (Hora de inicio [Cocción temporizada retardada]) Configuración de la Cocción temporizada retardada Por ejemplo, para hornear a 300 °F y retardar el inicio del proceso de horneado hasta las 4:30, primero debe configurar el reloj en la hora correcta del día. 1 Gire la perilla de modo del horno hasta seleccionar el modo Bake. 350 °F aparece en la pantalla. 2 Ajuste la temperatura: presione menos(-) hasta que aparezca 300 °F en la pantalla.
34 FUNCIONAMIENTO Extracción y colocación de los estantes del horno PRECAUCIÓN •• Coloque los estantes del horno antes de encenderlo para evitar quemaduras. Bake (Hornear) La función Hornear se utiliza para preparar alimentos como pasteles, panes y estofados. Es posible programar el horno para hornear a cualquier temperatura entre 170 °F (80 °C) y 550 °F (285 °C). La temperatura predeterminada es 350 °F (175 °C).
FUNCIONAMIENTO 35 Modo de convección El sistema de convección usa un ventilador para hacer circular el calor de manera pareja dentro del horno. La distribución de calor mejorada permite una cocción uniforme y resultados excelentes mientras cocina con uno o más estantes. 1 Gire la perilla de modo del horno hasta seleccionar el modo Conv. Bake o Conv. Roast. 2 Ajuste la temperatura del horno: Por ejemplo, presione más(+) hasta que aparezca 375 °F en la pantalla. 3 Presione Start.
36 FUNCIONAMIENTO Guía de recomendaciones para hornear y rostizar Los resultados del horneado serán mejores si las bandejas están centradas en el horno lo mejor posible. Si se cocina en varios estantes del horno, colóquelos en la posición que se ilustra.
FUNCIONAMIENTO 37 Broil (Asar) La función Asar utiliza el calor intenso de los quemadores superiores para cocinar la comida. Este método de cocción es ideal para cortes de carne tiernos, pescados y verduras finamente cortadas. PRECAUCIÓN •• No utilice una asadera sin rejilla. El aceite puede provocar un incendio causado por grasa. •• No cubra la rejilla ni la asadera con papel de aluminio. Si lo hace, se prenderá fuego. •• Siempre use una asadera con rejilla para drenar el exceso de grasa.
38 FUNCIONAMIENTO Guía de recomendaciones para asar El tamaño, el peso, el espesor, la temperatura inicial y su preferencia de cocción afectarán el tiempo de asado. Esta guía se basa en carnes a temperatura de refrigerador. Para obtener mejores resultados al asar, use una bandeja especial para asar.
FUNCIONAMIENTO 39 Consejos para asar Filete •• Los bistecs y las chuletas siempre se deben dejar reposar durante cinco minutos antes de cortarlos y comerlos. Esto permite que el calor se distribuya uniformemente en el alimento y resulta más tierno y jugoso. •• En el caso de bistecs con hueso o chuletas cortadas a la francesa (se retira toda la carne alrededor del hueso), envuelva las partes expuestas del hueso en papel de aluminio para que no se quemen demasiado.
40 FUNCIONAMIENTO Remote Start (Inicio remoto) Sabbath Mode (Modo Sabático) Si el artefacto está registrado en una red de Wi-Fi doméstica, esta función inicia o detiene la función de precalentamiento del artefacto. Siga las instrucciones de la página 41 para registrar el artefacto en la red. Modo Sabático es usado en días de descanso Judíos y festivos. Cuando el horno está en modo Sabático, la temperatura no se puede cambiar y las funciones de temporizador, luz y alarma están deshabilitadas.
FUNCIONES INTELIGENTES 41 FUNCIONES INTELIGENTES Antes de usar la aplicación LG ThinQ 1 La aplicación LG ThinQ le permite comunicarse con el electrodoméstico usando un teléfono inteligente. 2 Desactive los Datos Móviles o Datos Celulares en su teléfono inteligente. 3 Conecte su teléfono inteligente al enrutador inalámbrico. Funciones de la aplicación LG ThinQ Smart Diagnosis™ Esta función brinda información útil para diagnosticar y resolver problemas con el aparato conforme a su patrón de uso.
42 FUNCIONES INTELIGENTES NOTA •• La interfaz del usuario (UI) del teléfono inteligente puede variar según el sistema operativo (OS) y el fabricante. •• Puede que la configuración de red falle si el protocolo de seguridad del router está en WEP. Cambie el protocolo de seguridad por otro (es recomendado el WPA2) y registre el producto de nuevo. Instalación de la aplicación LG ThinQ Busque la aplicación LG ThinQ en la tienda Google Play o App Store desde su teléfono inteligente.
FUNCIONES INTELIGENTES 43 Aviso de la FCC (para el módulo transmisor contenido en este producto) −− Reoriente o reubique la antena receptora. −− Aumente la separación entre el equipo y el receptor. −− Conecte el equipo a una toma de corriente en un circuito diferente del utilizado por el receptor. −− Solicite ayuda a su vendedor o a un técnico especialista en radio o TV. Este dispositivo cumple con la parte 15 de las normas de la FCC.
44 FUNCIONES INTELIGENTES Función Smart Diagnosis™ Esta función solo está disponible en los modelos con el icono c o d. Utilice esta función como ayuda para diagnosticar y resolver problemas con su electrodoméstico. NOTA Uso del diagnóstico audible para diagnosticar problemas Siga las instrucciones a continuación para utilizar el método de diagnóstico audible. •• Inicie la aplicación LG ThinQ y seleccione la función Smart Diagnosis en el menú.
MANTENIMIENTO 45 MANTENIMIENTO PRECAUCIÓN •• No limpie este electrodoméstico con blanqueador. •• Siempre utilice guantes para limpiar la placa de cocción. Retiro y colocación de los quemadores de superficie de gas Es posible retirar las rejillas y las tapas y los cabezales de los quemadores para limpiarlos y brindarles mantenimiento. Para lograr que la llama salga pareja y libremente, las aberturas en los cabezales de los quemadores deben estar siempre limpias.
46 MANTENIMIENTO Rejillas de los quemadores La cocina incluye tres rejillas profesionales independientes. Para lograr la estabilidad máxima, estas rejillas solo se deben usar en la posición correcta. La rejilla central se puede intercambiar del frente a la parte posterior. Rejilla lateral Rejilla central Rejilla lateral Limpieza de la superficie de la placa de cocción PRECAUCIÓN •• Para evitar quemaduras, no limpie la superficie de la placa de cocción hasta que se haya enfriado.
MANTENIMIENTO 47 Perillas y panel del múltiple delantero Es mejor limpiar el panel del múltiple cada vez después de usar el horno. Para limpiarlo, use un paño húmedo y una solución de agua jabonosa suave o una solución mitad agua y mitad vinagre. Para enjuagar, use agua limpia y lustre con un paño suave. Reborde decorativo y pintado Para la limpieza general, use un paño con agua jabonosa caliente.
48 MANTENIMIENTO PRECAUCIÓN No use limpiadores fuertes ni materiales abrasivos de limpieza en el exterior de la puerta del horno. Si lo hace, puede dañarlo. No limpie manualmente la junta de la puerta del horno No limpie manualmente la puerta Instrucciones para el cuidado de la puerta La mayoría de las puertas de hornos contienen un vidrio que puede romperse. PRECAUCIÓN EasyClean® La tecnología esmaltada de LG EasyClean® ofrece dos opciones de limpieza para el interior de la cocina.
MANTENIMIENTO 49 Cuándo usar EasyClean® Método sugerido de limpieza Ejemplo de suciedad en el horno Tipos de suciedad Alimentos comunes que pueden ensuciar el horno Gotitas o manchitas Queso u otros ingredientes Pizza Bistecs, asados EasyClean® Self Clean* (Autolimpieza) Pescado, asado Salpicadura leve Grasa/aceite Salpicadura mediana a grande Grasa/aceite Carne rostizada a alta temperatura Relleno o suciedad de alimentos con azúcar Tartas Crema o salsa de tomate Estofados Gotas o mancha
50 MANTENIMIENTO 5 Atomice o eche 4/5 (8 oz o 240 ml) de agua abajo, en el centro de la cavidad. La superficie abajo de la estufa debe estar completamente cubierta para mojar todos los residuos. Añade agua si es necesario. NOTA Si limpia varias estufas, use del bote entero lleno de agua para limpiar cada estufa. No rocíe agua directamente en la puerta. Si lo hace, el agua chorreará al piso. 6 Cierre la puerta del horno. Gire la perilla de modo del horno hasta seleccionar el modo EasyClean®.
MANTENIMIENTO 51 Self Clean (Autolimpieza) El ciclo de Autolimpieza usa temperaturas sumamente altas para limpiar la cavidad del horno. Mientras se ejecute el ciclo de Autolimpieza, es posible que perciba humo u olor. Esto es normal, especialmente si el horno está muy sucio. Durante el ciclo de Autolimpieza, no se pueden usar las hornallas de la placa de cocción ni el cajón calentador. NOTA •• Quite los estantes del horno y los accesorios antes de iniciar el ciclo de Autolimpieza.
52 MANTENIMIENTO PRECAUCIÓN No fuerce la puerta del horno para abrirla cuando vea el icono del candado. La puerta permanece trabada hasta que baja la temperatura del horno. Si abre la puerta a la fuerza, se dañará. Configuración de Autolimpieza con inicio retardado 1 Quite todos los estantes y los accesorios del horno. 2 Gire la perilla de modo del horno hasta seleccionar el modo Self Clean.
MANTENIMIENTO 53 Cambio de la luz del horno La luz del horno es una bombilla estándar para electrodomésticos de 40 vatios. Se enciende cuando se abre la puerta del horno. Cuando la puerta del horno está cerrada, presione el botón Light para encenderla o apagarla. •• Asegúrese de que el horno y la bombilla estén fríos. •• Desconecte la energía eléctrica de la cocina desde el fusible principal o el panel disyuntor. El no hacerlo podría causar lesiones graves, descargas eléctricas o la muerte.
54 MANTENIMIENTO Colocación de la puerta Remoción del cajón 1 Tome firmemente ambos lados de la puerta desde la parte superior. 2 Con la puerta en el mismo ángulo que la posición de remoción, apoye la hendidura de los brazos de las bisagras en el borde inferior de las ranuras de las bisagras. Las muescas de los brazos de las bisagras deben estar totalmente apoyadas en el borde inferior de las ranuras.
SOLUCIÓN DE PROBLEMAS 55 SOLUCIÓN DE PROBLEMAS PREGUNTAS FRECUENTES Nunca utilice papel de aluminio para revestir la base o los costados del horno o el cajón calentador. El papel se derretirá y se pegará a la superficie del fondo del horno y no se podrá quitar. En lugar de eso, coloque una bandeja sobre un estante inferior del horno y úsela para recolectar las gotas. (Si ya se ha derretido papel de aluminio en el fondo del horno, esto no interferirá con el rendimiento del horno).
56 SOLUCIÓN DE PROBLEMAS ¿Por qué no funcionan los botones de función? Asegúrese de que la cocina no esté en modo Bloqueo. El icono del candado aparecerá en la pantalla si el modo de bloqueo está activado. Para desactivar el modo de bloqueo, presione Clock durante tres segundos. Suena la melodía de desbloqueo y aparece Loc en la pantalla hasta que los controles se desbloquean. Mi cocina todavía está sucia después de ejecutar el ciclo EasyClean®.
SOLUCIÓN DE PROBLEMAS 57 Antes de llamar al servicio técnico Antes de llamar para solicitar servicio, revise esta lista. Puede ahorrarle tiempo y gastos. La lista incluye sucesos comunes que no son consecuencia de problemas de fabricación ni de los materiales de este aparato. Síntomas Causas / soluciones posibles Los quemadores superiores no se encienden o no arden de forma pareja. •• Asegúrese de que las partes del quemador estén bien instaladas.
58 SOLUCIÓN DE PROBLEMAS Síntomas La puerta del horno no se abre después de un ciclo de Autolimpieza. La puerta del horno no está limpia después de un ciclo de Autolimpieza. Causas / soluciones posibles La temperatura del horno es demasiado alta. Espere una hora hasta que se enfríe. •• Los controles del horno están mal configurados. Consulte Autolimpieza en la sección MANTENIMIENTO. •• El horno estaba muy sucio. Limpie los derrames importantes antes de comenzar el ciclo de Autolimpieza.
SOLUCIÓN DE PROBLEMAS 59 Síntomas Causas / soluciones posibles •• La contraseña de la red Wi-Fi fue ingresada incorrectamente. - Borre su red Wi-Fi doméstica e inicie el proceso de registro de nuevo. •• Los Datos Móviles para su teléfono inteligente están activados. - Desactive los Datos Móviles en su teléfono inteligente previo a registrar el electrodoméstico. Problema al conectar el electrodoméstico y el teléfono inteligente a la red Wi-Fi.
60 GARANTÍA LIMITADA GARANTÍA LIMITADA (EE. UU.) AVISO DE ARBITRAJE: ESTA GARANTÍA LIMITADA CONTIENE UNA CLÁUSULA DE ARBITRAJE QUE LE DEMANDA A USTED Y A LG RESOLVER CONFLICTOS A TRAVÉS DE UN ARBITRAJE VINCULANTE EN LUGAR DE HACERLO EN LA CORTE, A MENOS QUE USTED DECIDA NO PARTICIPAR. EN EL ARBITRAJE NO ESTÁN PERMITIDAS LAS ACCIONES COLECTIVAS NI LOS JUICIOS CON JURADO. POR FAVOR, VEA A CONTINUACIÓN LA SECCIÓN TITULADA “PROCEDIMIENTO PARA RESOLVER CONFLICTOS”.
GARANTÍA LIMITADA 61 •• Reemplazo de focos, filtros o cualquier parte consumible. •• Cuando el producto se use de otra forma que no sea uso doméstico usual y normal (p. ej., uso comercial o industrial, en oficinas e instalaciones recreativas o vehículos) o uso contrario a las instrucciones detalladas en el manual del propietario del producto. •• Costos asociados con el retiro y la reinstalación de su producto para realizar reparaciones.
62 GARANTÍA LIMITADA Problema Causa Prevención •• Perillas derretidas Uso inadecuado •• No deje la puerta en la posición de paro durante del modo Asar/ Hornear ni inmediatamente después de cocinar. •• Los hornos o los estantes están manchados tras usar hojas de aluminio. La hoja de aluminio se derritió en el horno. •• Nunca cubra el fondo del horno ni cubra un estante entero con materiales como hojas de aluminio.
GARANTÍA LIMITADA 63 Problema Causa Prevención •• Las llamas son demasiado grandes en el anafe convertido (NP LP) El instalador no realizó parte de la conversión. (Revise 3 partes: regulador, válvula del anafe, válvula de asar/hornear). •• Consulte primero con el instalador. •• Consulte el manual de instalación. ESPAÑOL Regulador Válvula del anafe Válvula de asar/hornear Quemador de 17K / 18.5K necesita ahogador. •• Consulte el manual de instalación.
64 GARANTÍA LIMITADA PROCEDIMIENTO PARA RESOLVER CONFLICTOS: TODOS LOS CONFLICTOS ENTRE USTED Y LG QUE SURJAN FUERA DE O RELACIONADOS DE ALGUNA MANERA CON ESTA GARANTÍA LIMITADA O CON EL PRODUCTO, SE RESOLVERÁN EXCLUSIVAMENTE A TRAVÉS DE UN ARBITRAJE VINCULANTE Y NO EN UNA CORTE DE JURISDICCIÓN GENERAL. ARBITRAJE VINCULANTE SIGNIFICA QUE USTED Y LG RENUNCIAN AL DERECHO DE UN JUICIO CON JURADO Y A REALIZAR O PARTICIPAR EN UNA DEMANDA COLECTIVA. Definiciones.
GARANTÍA LIMITADA 65 Audiencias y ubicación. Si su reclamo es por $25,000 o menos, usted pueden optar que el arbitraje sea realizado únicamente sobre la base de: (1) documentos presentados al árbitro, (2) a través de una audiencia telefónica o (3) por una audiencia en persona, según lo establecido por las Normas de la AAA. Si su reclamo excede $25,000, el derecho a una audiencia estará determinado por las Normas de la AAA.
LG Customer Information Center 1-800-243-0000 USA Register your product Online! www.lg.