Owner’s Manual

26 OPERATION
NOTE
• Only the cycle code for the current Download
Cycle appears on the appliance. See the
smartphone app for cycle codes, names, and
more information about the available cycles.
- Default Cycle : P1. Pots & Pans
Machine Clean
This cycle is for cleaning the inside of the
dishwasher. Use the cycle without dishes in the
machine. It eliminates residual soils, odor, white
spots, and other dirt. Add citric acid or another
cleaning agent for more effective results.
• Press and hold Heavy for three seconds to
activate.
Rinse
This cycle is a quick rinse for dishes that will not be
washed immediately. The cycle rinses dishes that
have excess soil to soften dried on residue. Rinsing
the dishes helps prevent odors in the dishwasher.
No detergent should be used.
• This cycle does not have drying.
• Press and hold Normal for three seconds to
activate.
Express
This cycle will quickly clean lightly soiled dishes.
• This cycle does not have drying. Select the Extra
Dry and Night Dry option or another cycle for
better drying.
• Press and hold Turbo for three seconds to
activate.
Options and Extra Functions
Select the desired cycle and then select the options
for that cycle.
Dual Zone
This option automatically sets the spray intensity
to soft for the upper spray arm and strong for the
lower spray arm. Place heavily soiled dishes like
plates and bowls in the lower rack and lightly
soiled dishes like cups and small plates in the
upper rack to get the best results.
Half Load
This option washes intensively by selecting the
upper or lower racks. For small loads, use just the
upper or lower rack to save energy and time. Press
the Half Load button repeatedly to select the
upper [
f] or lower [g] rack or to cancel the
option.
Energy Saver
This option saves energy by reducing the wash and
rinse temperatures. Wash time is increased to
maintain wash performance. Do not use this cycle
with heavily soiled dishes.
Steam
This option adds steam at the start of the cycle to
improve wash performance.
If the Steam option is added to a cycle, the
indicator
a stays lit at the end of the cycle if the
dishes were properly sanitized. If the dishwasher
could not properly sanitize the dishes because the
Steam option was not selected, the cycle was
interrupted or the water could not be heated to
the required temperature, the indicator will not
light up at the end of the cycle. Open and close the
door or press POWER to turn the indicator off.
NOTE
• This high temperature rinse sanitizes dishes and
glassware in accordance with the NSF/ANSI
Standard 184 for residential dishwashers.
Certified residential dishwashers are not
intended for use in licensed food
establishments. Only sanitizing cycles have been
designed to meet the requirements for soil
removal and sanitization efficacy. There is no
intention, either directly or indirectly, that all
cycles on a certified machine have passed the
sanitization performance test.
High Temp.
Raises the main wash temperature to improve
cleaning.
Extra Dry
Select the Extra Dry option for better drying
performance. This option adds extra drying time to
the cycle and raises the heated rinse temperature.