ENGLISH FRANCAIS ESPAÑOL OWNER’S MANUAL AIR CONDITIONER Please read this manual carefully before operating your set and retain it for future reference. TYPE : WALL MOUNTED Applied Models : AS-W093B1Y9 AS-W123B1Y9 AS-W183C2Y9 P/NO : MFL42262857 http://www.lghvac.com www.lg.
TIPS FOR SAVING ENERGY ENGLISH TIPS FOR SAVING ENERGY Here are some tips that will help you minimize the power consumption when you use the air conditioner. You can use your air conditioner more efficiently by referring to the instructions below: • Do not cool excessively indoors. This may be harmful for your health and may consume more electricity. • Block sunlight with blinds or curtains while you are operating the air conditioner.
IMPORTANT SAFETY INSTRUCTIONS 3 READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE. Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product ! WARNING It can result in serious injury or death when the directions are ignored ! CAUTION It can result in minor injury or product damage when the directions are ignored ! WARNING • Installation or repairs made by unqualified persons can result in hazards to you and others.
IMPORTANT SAFETY INSTRUCTIONS ENGLISH READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE. • Do not place a heater or other heating appliances near the power cable. It may result in fire, electric shock, or product failure. • Make sure that the power cord is not pulled or damaged while the air conditioner is operating. Failure to do so may result in fire, electric shock, or product failure. • Do not place any objects on the power cord. It may result in electric shock or product failure.
IMPORTANT SAFETY INSTRUCTIONS 5 • Unplug the power plug if there is a noise, smell or smoke coming from the air conditioner. Failure to do so may result in explosion or fire. • Make sure to ventilate sufficiently when this air conditioner and a heating appliance such as a heater are used simultaneously. Failure to do so may result in fire, serious injury, or product failure. • Make sure that children do not climb up the outdoor unit or impact it. Failure to do so may result in death or product failure.
IMPORTANT SAFETY INSTRUCTIONS ENGLISH Use • Remove the batteries when the remote control is not in use for an extended period of time. Failure to do so may result in product failure. • Make sure that the filter is installed before you operate the air conditioner. Failure to do so may result in product failure. • Unplug the power plug when the air conditioner is not used for an extended period of time. Failure to do so may result in product failure.
TABLE OF CONTENTS 7 ENGLISH TABLE OF CONTENTS 2 TIPS FOR SAVING ENERGY 3 IMPORTANT SAFETY INSTRUCTIONS 8 BEFORE USE 14 ADVANCED FUNCTIONS 14 Changing room temperature quickly 14 Indoor air purification 14 - Auto Clean operation 15 Plasma Purification operation 15 Auto operation 16 Auto Changeover operation 8 Components 16 °C/°F Conversion 9 Using the remote control 16 Energy saving cooling mode 10 - Inserting batteries 16 Display screen brightness 10 - Installing the remote con
BEFORE USE ENGLISH BEFORE USE Components Indoor unit Air inlet Air filter ON/OFF button Front grille Horizontal vane Operation Signal Receiver lamp Air outlet Vertical louver * The feature can be changed according a type of model. ! NOTE The number of operation lamps and their locations may vary, depending on the model of the air conditioner.
BEFORE USE 9 ENGLISH Using the remote control You can operate the air conditioner more conveniently with the remote control. You will find the buttons for the additional functions under the cover of the remote control. Wireless remote control Control Display panel screen Display screen Control panel Description a F l = Sleep mode auto button*: Sets the sleep mode auto operation. e y Temperature adjustment buttons: Adjusts the room temperature when cooling and heating.
BEFORE USE ENGLISH Inserting batteries Insert batteries before using the remote control. The battery type used is AAA (1.5 V). 1 Remove the battery cover. 2 Fix the holder by fastening the 2 screws firmly with a screwdriver. 3 Slide the remote control into the holder. 2 Insert the new batteries and make sure that the + and - terminals of the batteries are installed correctly. Operating method 3 Reattach the battery cover.
BASIC FUNCTIONS 11 ENGLISH BASIC FUNCTIONS Cooling your room Removing humidity (Cooling operation) 1 Press d to turn on the power. 2 Press f repeatedly to select the cooling (Dehumidifying operation) operation. - A is displayed on the display screen. This mode removes excess moisture from an environment with high humidity or in the rainy season, in order to prevent mold from setting in. This mode adjusts the room temperature and the fan speed automatically to maintain the optimal level of humidity.
BASIC FUNCTIONS ENGLISH Airing your room (Air Circulation operation) This mode only circulates the indoor air without changing the room temperature. The cooling lamp lights up in air circulation mode. 1 Press d to turn on the power. 2 Press f repeatedly to select the air circulation operation. - E is displayed on the display screen. Adjusting the air flow direction 1 To adjust the direction of the air flow vertically, press i repeatedly and select the desired direction.
BASIC FUNCTIONS 13 Canceling the timer setting 1 Press p. - To cancel all timer settings, press p. Turning on the air conditioner automatically at a set time 1 Press m. - The icon below flickers at the bottom of the display screen. 2 Press o or q to select the minutes. 3 Press p to finish. Setting sleep mode Use the sleep mode to turn off the air conditioner automatically when you go to sleep. 1 Press d to turn on the power. 2 Press l 3 Press o or q to select the hour (up to 7 hours).
ADVANCED FUNCTIONS ENGLISH ADVANCED FUNCTIONS The air conditioner offers some additional advanced functions. Indoor air purification Auto Clean operation Changing room temperature quickly (Jet Cool/Heat operation) This mode allows you to cool indoor air quickly in summer or warm it quickly in winter. 1 Press d to turn on the power. 2 Press h. - In jet cooling mode, strong air blows out at a temperature of 18°C (64°F) for 30 minutes.
ADVANCED FUNCTIONS 15 Auto operation The plasma filter developed by LG removes microscopic contaminants from the intake air completely to supply clean and fresh air. 1 Press d to turn on the power. 2 Press a. - F is displayed on the display screen. (Artificial intelligence) ! Cooling-only models In this mode, the fan speed and the temperature adjust automatically, based on the room temperature. 1 Press d to turn on the power. 2 Press f repeatedly to select auto operation.
ADVANCED FUNCTIONS ENGLISH Auto Changeover operation Energy saving cooling mode This mode changes the operation mode automatically to maintain the set temperature at ±2°C. 1 Press d to turn on the power. 2 Press f repeatedly to select the auto changeover operation. - C is displayed on the display screen. This mode minimizes power consumption during cooling and increases the set temperature to the optimal level for a more comfortable environment. 1 Press d to turn the power on.
ADVANCED FUNCTIONS 17 Restarting the air conditioner automatically You can use the On/Off button of the indoor unit to operate the air conditioner when the remote control is unavailable. However, the fan speed is set to high. 1 Open the front cover. - Lift up both sides of the cover slightly. When the air conditioner is turned on again after a power failure, this function restores the previous settings. This function is a factory default setting. Disabling auto restart 1 Open the front cover.
MAINTENANCE ENGLISH MAINTENANCE Clean the product regularly to maintain optimal performance and to prevent possible breakdown. * This may not be provided, depending on the model. Plasma filter Air filter * The feature can be changed according a type of model. Item Cleaning interval Cleaning method Air filter 2 weeks See “Cleaning air filter.” Plasma filter* 3 months See “Cleaning the plasma filter.” Indoor unit surface Regularly Use a soft, dry cloth. Do not use bleach or abrasives.
MAINTENANCE 19 ENGLISH Cleaning the air filter Clean the air filter once every 2 weeks or more if necessary. 1 Turn off the power and unplug the power cord. 2 Open the front cover. - Lift up both sides of the cover slightly. * The feature can be changed according a type of model. 4 Use a vacuum cleaner to remove any dirt. - If dirt is difficult to remove, wash the filter with lukewarm water. 5 Dry the filter in the shade. ! * The feature can be changed according a type of model.
TROUBLESHOOTING ENGLISH TROUBLESHOOTING Self-diagnosis function This product has a built-in self-diagnosis function. If an error occurs, the lamp of the indoor unit will blink in 2 second intervals. If this occurs, contact your local dealer or service center. Before requesting service Please check the following before you contact the service center. If the problem persists, contact your local service center.
TROUBLESHOOTING 21 Possible causes Corrective action Air is not circulating properly. Make sure that there are no curtains, blinds or furniture blocking the front of the air conditioner. The air filter is dirty. Clean the air filter once every 2 weeks. See “Cleaning Air Filter” for more information. The room temperature is too high. In summer, it may take some time to cool indoor air. In this case, select the jet cool operation to cool indoor air quickly.
ENGLISH
Applied Models : AS-W093B1Y9 AS-W123B1Y9 AS-W183C2Y9 LGEUS LG Electronics, Air conditioning Division 1000 Sylvan Ave., Englewood Cliffs, NJ 07632 LGECI LG Electronics Canada Inc. 20 NORELCO DRIVE. NORTH YORK, ONTARIO M9L 2X6. US CANADA LG Customer Information Center 888-865-3026 888-865-3026 1-888-LG-Canada USA, press #2 for PTAC, TTW USA, press #3 for DFS, Multi V CANADA Register your product Online! www.lg.com 1.
