Room Air Conditioner OWNER’S MANUAL Please read carefully and thoroughly this manual before operating this unit.
Safety Precautions Safety Precautions Warning ................................2 Caution .................................3 Operating Instructions Preparation before operation.. 4 Remote Control Features....... 5 Operation Mode Selection...... 7 Operating Instructions Additional Features...............14 Safety precautions To prevent injury to the user or other people and property damage, the following instructions must be followed.
• Contact the authorized Service technician for repair or maintenance of this unit. • Contact the installer for installation of this unit. • The air conditioner is not intended for use by young children or infirm persons without supervision. • Young children should be supervised to ensure that they do not play with the air conditioner. Safety Precautions CAUTION CAUTION • It may cause an injury.
Troubleshooting Tips Care and Maintenance Operating Instructions Safety Precautions Preparation before operation How to Insert the Batteries Remove the battery cover by pulling it according to the arrow direction. Insert new batteries making sure that the (+) and (-) of battery are installed correctly. Reattach the cover by sliding it back into position. NOTES: • Use 2 AAA(1.5volt) batteries. Do not use rechargeable batteries.
The remote control transmits the signals to the system. Features of the Remote Control- Door Closed Signal transmitter Signal transmitter 6 5 FAN SPEED 4 1 1 POWER 4 3 3 4 3 2 TYPE A 1 FAN SPEED 2 2 POWER TEMP 1 MODE A/SWING OL JET CO 3 4 Flip-up door (closed) 5 6 Signal transmitter 2 ON Flip-up door (closed) TYPE B MODE ON Flip-up door (closed) TYPE C Flip-up door (closed) TYPE D Used to select fan speed in four steps low, medium, high, or CHAOS.
Safety Precautions Features of the Remote Control- Door Opened Signal transmitter ON/OFF TIMER BUTTONS 1 Used to set the time of starting and stopping operation. Troubleshooting Tips Care and Maintenance Operating Instructions Signal transmitter TIME SETTING BUTTONS 2 Used to adjust the time, (See page 15) TIMER SET/CANCEL BUTTONS 3 Used to set the timer when the desired time is 1 ON OFF SET CANCEL obtained and to cancel the Timer operation.
Cooling Operation Press the Start/Stop button. The unit will respond with a beep. 2 Open the door on the remote control. To select Cooling Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow. POWER MODE Cooling JET COOL FAN SPEED TEMP Healthy Dehumidification Heating (Heat pump model only) Close the door on the remote control. Set the temperature higher than the room temperature.
Safety Precautions Care and Maintenance Operating Instructions Auto Operation 1 Press the Start/Stop button. The unit will respond with a beep. 2 Open the door on the remote control. To select Auto Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow.
Safety Precautions Healthy Dehumidification Operation Press the Start/Stop button. The unit will respond with a beep. 2 Open the door on the remote control. To select Healthy Dehumidification Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow.
Safety Precautions Troubleshooting Tips Care and Maintenance Operating Instructions Heating Operation(Heat pump model only) 1 Press the Start/Stop button. The unit will respond with a beep. 2 Open the door on the remote control. To select Heating Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow.
Safety Precautions Jet Cool Operation A/SWING 2 Press the Jet Cool button to operate the speed cooling mode and the unit will operate in super high fan speed on cooling mode for 30 minutes. 3 To cancel the Jet Cool mode, press the Jet Cool button again or the fan speed button or the room temperature setting button and the unit will operate in high fan speed on cooling mode.
Safety Precautions Troubleshooting Tips Care and Maintenance Operating Instructions PLASMA Purification Operation(Optional) 1 Press the Start/Stop button. The unit will respond with a beep. 2 Open the door on the remote control. Press the PLASMA air purifying operation ON/OFF button. Operation will start when the button is pressed and stop when the button is pressed again. 3 JET COOL FAN SPEED TEMP A/SWING POWER POWER PLASMA Set the fan speed again with door of the remote control closed.
Safety Precautions 2nd F Operation nd 2nd F ON OFF Press the Start/Stop button. The unit will respond with a beep. 2 Open the door of the remote control and press the 2nd Function button to operate functions printed in blue at bottom of buttons. (Check the indication of 2nd function on remote control display.
Operating Instructions Safety Precautions Additional features Sleep Mode 1 Press the Sleep Mode Auto button to set the SLEEP time you want the unit to turn off automatically. To cancel the Sleep Mode, press the sleep Mode Auto button several times until the star ( ) disappears from the operation display. 2 The Timer is programmed in one-hour increments by pressing the Sleep Mode Auto button 1 to 7 times. The sleep mode is available for 1 to 7 times.
The up/down airflow (Vertical Airflow) can be adjusted by using the remote control. Press the Start/Stop button to start the unit. 2 Press Air Swing button and the louvers will swing up and down. Press the Air Swing button again to set the vertical louver at the desired airflow direction. A/SWING Adjust the left/right airflow direction by hand.
Safety Precautions Forced Operation Please follow the step 1 to step 5 for forced operation. 1. 2. 3. 4. 5. Turn ON the unit using power button. Turn OFF the unit using power button. Switch OFF the mains supply to the unit. Switch ON the mains supply to the unit. Turn ON the unit using the power button.
CAUTION:Before performing any maintenance, turn off the main power to the system. Indoor Unit Turn the system off before cleaning. To clean, wipe with a soft, dry cloth. Do not use bleach or abrasives. NOTE: Supply power must be disconnected before cleaning the indoor unit. Pow d er G a s o li n e 1 AIR FILTERS the filter with a vacuum or warm, soapy 2 Clean water. • If dirt is conspicuous, wash with a solution of detergent in lukewarm water. • If hot water (40°C or more) is used, it may be deformed.
Safety Precautions Operating Instructions Care and Maintenance Troubleshooting Tips Replacement of Purifying Filter(Option) • Recomended use period : About 2 years 2 Remove air purifying filters. 1 Open front panel and remove air filters. 3 Insert new air purifying filters. 4 Reinsert air filters and close front panel. Air purifying filter Outdoor Unit The heat exchanger coils and panel vents of the outdoor unit should be checked regularly.
When air conditioner is not going to be used for a long time. When the air conditioner is to be used again. Clean the air filter and install it in the indoor unit. (Refer to page 16 for cleaning filters.) Operate the air conditioner on Air circulation mode (Refer to page 14) for 2 to 3 hours. Safety Precautions When the air conditioner is not going to be used for a long time. • This will dry out the internal mechanisms. Check that the air inlet and outlet of the indoor/outdoor unit are not blocked.
Safety Precautions Before you call for service... ? Troubleshooting Tips! Save time and money! Check the following points before requesting repairs or service.... If the fault persists, please contact your dealer or service center. Case Operating Instructions Care and Maintenance See page • Have you made a mistake in timer operation? 14 • Has the fuse blown or has the circuit breaker been tripped? - The room has a peculiar odor.
P/No.
