ENGLISH Español OWNER’S MANUAL ELECTRIC RANGE Read this owner’s manual thoroughly before operating the appliance and keep it handy for reference at all times. LSSE3027** LSSE3030** www.lg.com MFL68881510_01 Copyright © 2017 - 2018 LG Electronics Inc. All Rights Reserved.
TABLE OF CONTENTS TABLE OF CONTENTS 3 IMPORTANT SAFETY INSTRUCTIONS 29 9 PRODUCT OVERVIEW 9 9 Parts Accessories 10 INSTALLATION 10 10 11 12 14 18 18 19 Installation Overview Product Specifications Before Installing the Range Installing the Range Connecting Electricity Engaging the Anti-tip Device Optional Rear Filler Test Run 20 OPERATION 20 21 22 26 Control Panel Overview Knob Positions Changing Oven Settings 22 Clock 22 Oven Light 22 Minimum & Maximum Default Settings 23 Timer On/Off 23 Wi-Fi
IMPORTANT SAFETY INSTRUCTIONS 3 Read and follow all instructions when using the range to prevent the risk of fire, electric shock, personal injury, or damage. This guide does not cover all possible conditions that may occur. Always contact your service agent or manufacturer about problems that you do not understand. Download this owner's manual at: http://www.lg.com This is the safety alert symbol.
IMPORTANT SAFETY INSTRUCTIONS SAFETY PRECAUTIONS •• DO NOT TOUCH HEATING ELEMENTS OR INTERIOR SURFACES OF OVEN. Heating elements may be hot even though they are dark in color. Interior surfaces of an oven become hot enough to cause burns. During and after use, do not touch or let clothing or other flammable materials contact heating elements or interior surfaces of oven until they have had sufficient time to cool.
IMPORTANT SAFETY INSTRUCTIONS 5 Warning Be certain that all packing materials are removed from the appliance before operating. Keep plastic, clothes, paper, and other flammable materials away from parts of the appliance that may become hot. •• Do not store or use flammable material in the oven or near or on the cooktop. Flammable materials include paper, plastic, pot holders, linens, wall coverings, curtains, and gasoline or other flammable vapors and liquids such as grease or cooking oil.
IMPORTANT SAFETY INSTRUCTIONS CHILD SAFETY •• Do not touch the hot surface between the bottom of the oven door and the top of the drawer on the front of the oven while the oven is in operation. The surface becomes hot and can cause burns and other injury. •• Do not leave small children unattended near the oven. Warning Do not leave children alone or unsupervised near the appliance when it is in use or is still hot.
IMPORTANT SAFETY INSTRUCTIONS 7 ENERGY SAVING TIPS •• Multiple-rack cooking saves time and energy. Whenever possible, cook foods requiring the same cooking temperature together in one oven. •• For optimal performance and energy savings, follow the guides on page 31 for proper rack and pan placements. •• Match the size of the cookware to the amount of food being cooked to save energy when heating. Heating ½ quart of water requires more energy in a 3-quart pot than in a 1-quart pot.
IMPORTANT SAFETY INSTRUCTIONS •• Pull the oven rack to the stop-lock position when loading and unloading food from the oven. This helps prevent burns caused by touching hot surfaces of the door and oven walls. •• Do not use the oven if a heating element develops a glowing spot during use or shows other signs of damage. A glowing spot indicates the heating element may fail and present a potential burn, fire, or shock hazard.
PRODUCT OVERVIEW 9 ENGLISH PRODUCT OVERVIEW Parts Cooktop Glass-ceramic Cooktop controller Oven mode knob Gasket Oven door Model & serial number plate Warming drawer Accessories Included Accessories Heavy rack (2ea) Gliding rack (1ea) Cleaner Cleaning pad Cooktop cleaner (1ea) Cooktop cleaning pad (1ea) Meat probe (1ea) Spray bottle (1ea) Non-scratch scouring pad (1ea) Optional Accessories Grid Broiler pan NOTE •• Contact LG Customer Service at 1-800-243-0000 if any accessories are missi
INSTALLATION INSTALLATION Installation Overview Please read the following installation instructions first after purchasing this product or transporting it to another location.
INSTALLATION 11 If you did not receive an anti-tip bracket with your purchase, call 1-800-243-0000 to receive one at no cost. Warning Warning Tip - Over Hazard •• The information in this manual should be followed exactly. Failure to do so may result in fire, electrical shock, property damage, personal injury, or death. A child or adult can tip the range and be killed. Verify the anti-tip bracket has been installed. Ensure the anti-tip bracket is engaged when the range is moved.
INSTALLATION Installing the Range Unpacking and Moving the Range CAUTION •• You should use two or more people to move and install the range. (Excessive Weight Hazard) Failure to do so can result in back or other injury. •• Do not use the door handles to push or pull the range during installation or when moving the range out for cleaning or service. Doing so can result in serious damage to the door of the range. Remove packing material, tape and any temporary labels from your range before using.
INSTALLATION 13 ENGLISH Dimensions and Clearances NOTE Save for the use of the local electrical inspector. 3" (7.6 cm) 24" (60.9 cm) Acceptable electrical outlet area Normal counter top depth Counter 36" (91.4 cm) top height A Cabinet opening Wall 24" (60.9 cm) 36" (91.4 cm) 3" (7.6 cm) 25" (63.5 cm) Center 15" (38 cm) Cabinet 11" (28 cm) 6" (15.2 cm) 29.8" (75.7 cm) 4" (10 cm) 9" (23 cm) 2.5" (6.3 cm) 5" (13 cm) 4" (10 cm) 6" (15.2 cm) 9" (23 cm) 2.5" (6.3 cm) A = 30" (76.2 cm) For U.
INSTALLATION Installing the Anti-tip Device Use a level to check your adjustments. Place the level diagonally on the oven rack, and check each direction for level. Warning Tip - Over Hazard First check direction . A child or adult can tip the range and be killed. Verify the anti-tip bracket has been installed. Ensure the anti-tip bracket is engaged when the range is moved. Do not operate the range without the anti-tip bracket in place.
INSTALLATION 15 •• Allow 2 to 3 ft (61.0 cm to 91.4 cm) of slack in the line so that the range can be moved if servicing is ever necessary. •• The power supply cord and plug should not be modified. If it will not fit the outlet, have a proper outlet Installed by a qualified electrician. Use the cord/conduit connection plate to install the power cord or conduit. Leave the connection plate as installed for power cord installations.
INSTALLATION 3-Wire Connection : Power Cord 4-Wire Connection : Power Cord Warning Warning •• The middle (neutral or ground) wire, which is white, of a 3-wire power cord or a 3-wire conduit has to be connected to the middle post of the main terminal block. The remaining two wires of the power cord or conduit have to be connected to the outside posts of the main terminal connection block. Failure to do so can result in electrical shock, severe personal injury or death.
INSTALLATION 17 4-Wire Connection: Conduit Install the conduit as follows: Remove the conduit connection plate from the rear of the oven and rotate it. The conduit hole (11/8") must be used. First, prepare the conduit wires as shown below. 3-Wire 1" (2.5 cm) Conduit connection plate 4-Wire 31/2" (8.9 cm) 1" 3/8" (2.5 cm) (0.9 cm) 3/8" (0.9 cm) 31/2" (8.9 cm) or 3/4" (1.9 cm) Ground wire 23/4" (6.9 cm) Second, install the conduit strain relief.
INSTALLATION Engaging the Anti-tip Device Optional Rear Filler •• Move the range close enough to the opening to plug into the receptacle. If the counter does not bridge the opening at the rear wall the rear filler kit, that is provided with the slide in range, will be needed. •• Slide the range into position ensuring that the back leg slides under the anti-tip bracket. The range should sit flush against the back wall when properly installed.
INSTALLATION 19 Check if the range is properly installed and run a test cycle. 1 Turn the oven mode knob to the Off position to start test. 2 Turn each knob to the Hi position to check that the surface heating elements are working properly. The elements should glow red and radiate heat, and they should cycle on and off periodically even when the knob is in the Hi position. This cycling prevents the glass-ceramic from being cracked by thermal shock.
OPERATION OPERATION Control Panel Overview 1 Hold 3 seconds 2 3 4 5 6 7 1 Smart DiagnosisTM Use during the Smart Diagnosis feature. 2 Cook Time / Clock •• Press the button to set the desired amount of time for food to cook. The oven shuts off when the set cooking time runs out. •• Press and hold button for three seconds to set the time of day. 3 Start Time / Setting •• Press the button to set the delayed timed cook. The oven starts at the set time.
OPERATION 21 After cleaning the oven knobs, make sure to replace each knob in the correct position. Failure to do so can result in improper operation of the burners.
OPERATION Changing Oven Settings Clock The clock must be set to the correct time of day in order for the automatic oven timing functions to work properly. 1 Set the oven mode knob to the Off position. 2 Press and hold Cook Time for three seconds. CLO shows in the display. 3 Press plus(+) or minus(-) to select the desired time. Plus(+) to increase the time and minus(-) to decrease the time. 4 Press Start to enter the time and start the clock.
OPERATION 23 Settings The Timer On/Off serves as an extra timer in the kitchen that beeps when the set time has run out. It does not start or stop cooking. Set the oven mode knob to the Off position. Press and hold Start Time for three seconds. Then press the Start Time key repeatedly to toggle through and change oven settings. The Timer On/Off feature can be used during any of the oven control functions. Setting the Timer (for example to set 5 minutes) 1 2 Set the oven mode knob to the Off position.
OPERATION Adjusting the Oven Temperature Adjusting the Beeper Volume Your new oven may cook differently from the one it replaced. Use your new oven for a few weeks to become more familiar with it before changing the temperature settings. If after familiarizing yourself with the new oven, you still think that it is too hot or too cold, you can adjust the oven temperature yourself. 1 2 NOTE To begin, either raise or lower the thermostat 15 °F (8 °C). Try the oven with the new setting.
OPERATION 25 Cook Time (Timed Cook) The automatic timer of the Delayed Timed Cook function turns the oven on and off at the time you select. This feature can be used with the Bake, Conv. Bake and Conv. Roast modes. Set the oven to cook for a specific length of time using the Timed Cook feature. This feature can only be used with the Bake, Conv. Bake and Conv. Roast modes.
OPERATION Using the Cooktop Using the Cooktop Elements CAUTION Cooking Areas •• Only use cookware and dishes that are safe for oven and cooktop use. The cooking areas on your range are identified by permanent circles on the glass cooktop surface. For the most efficient cooking, fit the pan size to the element size. •• Always use oven mitts when removing food from the cooktop and oven. •• Do not place sealed containers on the cooktop.
OPERATION 27 There is one dual element located in the left front position. Use the dual element as a dual or single element. 1 Push in the appropriate knob. 2-A Turn the knob counterclockwise to use it as a Single element. 2-B Turn the knob clockwise to use it as a Dual unit. Heating with inner (smaller) element only CAUTION FOOD POISON HAZARD: Bacteria may grow in food at temperatures below 140 °F. •• Always start with hot food. Do not use the warm setting to heat cold food.
OPERATION Using the Proper Cookware Choosing Cookware The size and type of cookware will influence the settings needed for the best cooking results. Be sure to follow the recommendations for using proper cookware. The cookware material determines how evenly and quickly heat is transferred from the surface element to the pan bottom. The most popular materials available are: Cookware should have flat bottoms that make good contact with the entire surface heating element.
OPERATION 29 Using Oven Racks The racks have a turned-up back edge that prevents them from being pulled out of the oven cavity. Before Using the Oven NOTE •• Because the oven temperature cycles, an oven thermometer placed in the oven cavity may not show the same temperature that is set on the oven. •• It is normal for the convection fan to run while preheating during a regular bake cycle. •• The convection fan motor may run periodically during a regular bake cycle.
OPERATION Baking Tips Tips for Convection Baking •• Baking time and temperature will vary depending on the characteristics, size, and shape of the baking pan used. •• Use Convection Bake for faster and more even multiple-rack cooking of pastries, cookies, muffins, biscuits, and breads of all kinds. •• Check for food doneness at the minimum recipe time. •• Bake cookies and biscuits on pans with no sides or very low sides to allow heated air to circulate around the food.
OPERATION 31 Baking results will be better if baking pans are centered in the oven as much as possible. If cooking on multiple racks, place the oven racks in the positions shown.
OPERATION Broil Smoking The Broil function uses intense heat from the upper heating element to cook food. Broiling works best for tender cuts of meat, fish, and thinly cut vegetables. Some models may feature a hybrid broiler consisting of an inner broiler that utilizes a carbon heating element which provides instantaneous heat, and a traditional outer broiling element. During normal broiler operation, it is normal for either element to cycle off intermittently.
OPERATION 33 The size, weight, thickness, starting temperature, and your preference of doneness will affect broiling times. This guide is based on meats at refrigerator temperature. For best results when broiling, use a pan designed for broiling. Food Quantity and/or Thickness Rack First Side Position (minutes) Second Side (minutes) Comments Space evenly. For 1-4 patties, use Speed Broil. For more than 4 patties, use Broil. Ground Beef Well done 1 lb.
OPERATION Tips for Broiling Beef •• Steaks and chops should always be allowed to rest for five minutes before being cut into and eaten. This allows the heat to distribute evenly through the food and creates a more tender and juicy result. •• Pieces of meat that are thicker than two inches should be removed from the refrigerator 30 minutes prior to cooking. This will help them cook more quickly and evenly, and will produce less smoke when broiling.
OPERATION 35 The Speed Roast feature is designed to quickly roast poultry. The combination of intense heat from the upper heating element and heated air from the back heating element result in crispier food and help to save cooking time. Speed roasting is especially good for medium sized poultry. NOTE •• The recommended cook time is 60-65 minutes for a whole chicken weighing 3.3 lb. •• Adjust the cook time according to the weight of the poultry. •• Place the oven rack in position 2.
OPERATION Remote Start Sabbath Mode If the appliance is registered on a home Wi-Fi network,this function starts preheating and then holds the temperature for up to an hour (including preheating time). If the appliance is not registered on the network, “OFF” appears in the display. Follow the instructions on page 39 to register the appliance on the network. Sabbath mode is used on the Jewish Sabbath and Holidays.
OPERATION 37 Warming Drawer food/power level recommendations Setting Low Type of Food •• Rolls (Soft) •• Empty dinner plates Medium High •• Gravies •• Biscuits •• Casseroles •• Rolls (hard) •• Eggs •• Pastries •• Vegetables •• Roasts •• Bacon •• Pizza •• Hamburger patties •• Fried Foods •• Poultry The Warming Drawer keeps hot cooked foods at serving temperature. All food placed in the Warming Drawer should be covered with an oven-safe lid or aluminum foil to maintain quality.
OPERATION CAUTION •• Do not use the warming drawer for storage of racks, broiler pans, insert pans, plates, or utensils. The warming drawer contains a heating element which may damage any items not specifically designed to be used with it and should only be used to store cookware specifically supplied by LG with your range. •• Do not put food or foil directly on the surface or base of the warming drawer. This may result in damage to your drawer and may spoil your food.
SMART FUNCTIONS 39 LG SmartThinQ Application The LG SmartThinQ application allows you to communicate with the appliance using a smartphone. Before Using LG SmartThinQ •• For appliances with the 1 or logo Use a smartphone to check the strength of the wireless router (Wi-Fi network) near the appliance. •• If the distance between the appliance and the wireless router is too far, the signal strength becomes weak. It may take a long time to register or installation may fail.
SMART FUNCTIONS Monitoring This function helps you recognize the current status, remaining time, cook settings and end time on the screen. 1 Call the LG call center at: (LG U.S.) 1-800-243-0000. 2 When instructed to do so by the call center agent, hold the mouthpiece of your phone over the Smart Diagnosis™ logo on the machine. Hold the phone no more than one inch from (but not touching) the machine. Push Alerts Turn on the Push Alerts to receive appliance status notifications.
SMART FUNCTIONS 41 Select the Audible Diagnosis. Follow the instructions on the smart phone. Keep the phone in place until the tone transmission has finished. View the diagnosis on the phone. NOTE •• Smart Diagnosis™ cannot be activated unless the appliance can be turned on using the Power button. If the appliance cannot be turned on, troubleshooting must be done without using Smart Diagnosis™. •• The Smart Diagnosis™ function depends on the local call quality.
MAINTENANCE MAINTENANCE Cleaning the Glass-Ceramic Cooktop Burned-On Residue 1 CAUTION While the cooktop is still hot, remove any burnt on deposits or spilled food from the glass-ceramic cooking surface with a suitable metal razor scraper. (Similar to scraping paint off of a windowpane, it will not damage the decorated cooking surface.) Hold the scraper at an approximate 30° angle to the cooktop. •• Do not use scrub pads or abrasive cleaning pads. They may damage your cooktop surface.
MAINTENANCE 43 1 Be careful not to slide pots and pans across the cooktop. Doing so will leave metal markings on the cooktop surface. To help remove these marks, use a ceramic cooktop cleaner with a cleaning pad for ceramic cooktops. 2 If pots with a thin overlay of aluminum or copper are allowed to boil dry, the overlay may leave black discoloration on the cooktop. This should be removed immediately before heating again or the discoloration may be permanent.
MAINTENANCE When to Use EasyClean® Suggested Cleaning Method Example of Oven Soiling Soil Pattern Types of Soils Common Food Items That Can Soil Your Oven Small drops or spots Cheese or other ingredients Pizza Steaks, broiled EasyClean® Fish, broiled Light splatter Fat/grease Medium to heavy splatter Fat/grease Meat roasted at high temperatures Filling or sugar based soils Pies Cream or tomato sauce Casseroles Self Clean* Drops or spots Meat roasted at low temperatures * The Self Cl
MAINTENANCE 45 Spray or pour the remaining 1 cup (8 oz or 250 ml) of water onto the bottom center of the oven cavity. The indentation on the oven bottom should be fully covered to submerge all soils. Add water if necessary. NOTE Use the "mist" setting on the spray bottle for better coverage. The entire 1¼ cup (10 oz or 300 ml) of water should be used for each oven cavity cleaned. Do not spray water directly on the door. Doing so will result in water dripping to the floor. 6 Close the oven door.
MAINTENANCE Self Clean The Self Clean cycle uses extremely hot temperatures to clean the oven cavity. While running the Self Clean cycle, you may notice smoking or an odor. This is normal; especially if the oven is heavily soiled. During the Self Clean cycle, the cooktop elements and warming drawer cannot be used. NOTE •• Remove oven racks and accessories before starting the Self Clean cycle. During Self Clean, the kitchen should be well ventilated to minimize the odors from cleaning.
MAINTENANCE 47 Do not force the oven door open when the lock icon is displayed. The oven door remains locked until the oven temperature has cooled. Forcing the door open will damage the door. Setting Self Clean with a Delayed Start 1 Remove all racks and accessories from the oven. 2 Turn the oven mode knob to select Self Clean. The oven defaults to the recommended four-hour self clean for a moderately soiled oven. Press plus(+) or minus(-) to select a self clean time from 3 to 5 hours.
MAINTENANCE Changing the Oven Light Cleaning the Exterior The oven light is a standard 40-watt appliance bulb. It turns on when the oven door is open. When the oven door is closed, press Light to turn it on or off. Painted and Decorative Trim For general cleaning, use a cloth with hot soapy water. For more difficult soils and built-up grease, apply a liquid detergent directly onto the soil. Leave it on for 30 to 60 minutes. Rinse with a damp cloth and dry. Do not use abrasive cleaners.
MAINTENANCE 49 Oven Racks It is best to clean the manifold panel after each use of the range. For cleaning, use a damp cloth and mild soapy water or a 50/50 solution of vinegar and water. For rinsing, use clean water and polish dry with a soft cloth. Remove the oven racks before operating the self clean cycle. The control knobs may be removed for easy cleaning. 1 To clean the knobs, make sure that they are in the Off position and pull them straight off the stems.
MAINTENANCE Broiler Pan and Grid •• Do not store a soiled broiler pan or grid anywhere in the range. •• Do not clean the broiler pan or grid in a self-cleaning mode. •• Remove the grid from the pan. Carefully pour out the grease from the pan into a proper container. •• Wash and rinse the broiler pan and grid in hot water with a soap-filled or plastic scouring pad. •• If food has burned on, sprinkle the grid with cleaner while hot and cover with wet paper towels or a dishcloth.
MAINTENANCE 51 1 2 Removing the Drawer Firmly grasp both sides of the door at the top. With the door at the same angle as the removal position, seat the indentation of the hinge arms into the bottom edge of the hinge slots. The notch in the hinge arms must be fully seated into the bottom edge of the slots. Hinge arm Bottom edge of slot CAUTION Disconnect the electrical power to the range at the main fuse or circuit breaker panel.
TROUBLESHOOTING TROUBLESHOOTING Can I use aluminum foil to catch drippings in my oven cavity? FAQs Never use aluminum foil to line the bottom or sides of the oven or the warming drawer. The foil will melt and stick to the bottom surface of the oven and will not be removable. Use a sheet pan placed on a lower oven rack to catch drippings instead. (If foil has already melted onto the bottom of the oven, it will not interfere with the oven's performance.
TROUBLESHOOTING 53 Make sure that the range is not in Lockout mode. will show in the display if Lockout is The lock activated. To deactivate Lockout, pressing Probe for three seconds. The unlock melody sounds and Loc appears in the display until the controls are unlocked. My range is still dirty after running the EasyClean® cycle. What else should I do? The EasyClean® cycle only helps to loosen light soils in your oven range to assist in hand-cleaning of your oven.
TROUBLESHOOTING Before Calling for Service Before you call for service, review this list. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. Symptoms Possible Causes / Solutions •• Poor installation. Place oven rack in center of oven. Place a level on the oven rack. Adjust leveling legs at base of range until the oven rack is level. Range is not level.
TROUBLESHOOTING 55 Possible Causes / Solutions •• Plug on range is not completely inserted in the electrical outlet. - Make sure electrical plug is plugged into a live, properly grounded outlet. •• A fuse in your home may be blown or the circuit breaker tripped. Oven will not work - Replace the fuse or reset the circuit breaker. •• Oven controls improperly set. - See the Using the Oven section. •• Oven too hot. - Allow the oven to cool to below locking temperature.
TROUBLESHOOTING Symptoms Possible Causes / Solutions •• Aluminum foil used on the broiling pan and grid has not been fitted properly and slit as recommended. Food does not broil properly - See the Using the Oven section. •• In some areas the power voltage may be low. - Preheat the broil element for 5-7 minutes. - See the Broiling Guide. Oven temperature too hot or too cold Scratches or abrasions on cooktop surface •• Oven sensor needs to be adjusted.
TROUBLESHOOTING 57 Possible Causes / Solutions •• Oven is too hot. Oven door does not open after a Self Clean cycle - Allow the oven to cool below locking temperature. •• Allow about one hour for the oven to cool after the completion of a Self Clean cycle. The door can be opened when the lock is no longer displayed. •• The control and door may be locked. •• Oven controls not properly set. The oven does not clean after a Self Clean cycle - See the Self Clean section. •• Oven was heavily soiled.
WARRANTY WARRANTY (USA) Should your LG Electric Range fail due to a defect in materials or workmanship under normal home use, during the warranty period set forth below, LG will at its option repair or replace the product. This limited warranty is valid only to the original retail purchaser of the product and applies only when purchased and used within the United States including U.S. Territories. Proof of original retail purchase is required to obtain warranty service under this limited warranty.
WARRANTY 59 •• Damage resulting from misuse, abuse, improper installation, repair, or maintenance. Improper repair includes use of parts not approved or specified by LG. Not Covered by Warranty Problem •• Cooktop crack Cause Prevention Cooktop crack caused by impact of object primary crack •• DO NOT store heavy items above the cooktop surface as they could fall and damage it. •• DO NOT scratch the cooktop or the cooktop could crack.
WARRANTY Problem Cause Prevention •• Surface is not level 1. Range not leveled •• Oven is tipping 2. Anti-tip device not installed correctly Level both sides of range Approximately 0.65" (16.5 mm) •• Check with installer first Anti-tip bracket Screw must enter wood or concrete Wall plate Use carpenter’s level to check level. 2 1 The cost of repair or replacement under these excluded circumstances shall be borne by the consumer.
Español MANUAL DEL PROPIETARIO COCINA ELÉCTRICA Lea detenidamente el manual del propietario antes de poner el aparto en funcionamiento y consérvelo a mano en todo momento para su referencia. LSSE3027** LSSE3030** www.lg.com MFL68881510_01 Copyright © 2017 - 2018 LG Electronics Inc. Todos los Derechos Reservados.
2 ÍNDICE ÍNDICE 3 INSTRUCCIONES IMPORTANTES 27 DE SEGURIDAD 9 DESCRIPCIÓN GENERAL DEL PRODUCTO 9 9 29 Piezas Accesorios 10 INSTALACIÓN 10 10 11 12 14 18 18 19 Descripción general de la instalación Especificaciones del producto Antes de instalar la cocina Instalación de la cocina Conexión de la electricidad Colocación del dispositivo antivuelco Barra Trasera Opcional Prueba de funcionamiento Configuración recomendada de cocción en superficie 28 Uso de batería de cocina adecuada 28 Elección de la b
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 3 INSTRUCCIONES IMPORTANTES DE SEGURIDAD Descargue este manual del propietario en: http://www.lg.com Este es el símbolo de alerta de seguridad. Este símbolo le advierte sobre posibles riesgos que pueden ocasionar daños materiales, lesiones personales graves o la muerte. El símbolo de alerta de seguridad siempre estará acompañado de las palabras "ADVERTENCIA" o "PRECAUCIÓN".
4 INSTRUCCIONES IMPORTANTES DE SEGURIDAD PRECAUCIONES DE SEGURIDAD •• NO TOQUE LAS HORNALLAS NI LAS SUPERFICIES INTERIORES DEL HORNO. Las hornallas podrían estar calientes incluso cuando presenten un color oscuro. Las superficies interiores del horno se calientan lo suficiente como para causar quemaduras.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 5 MATERIALES INFLAMABLES Advertencia •• No almacene ni utilice material inflamable en el horno ni cerca de la placa de cocción. Los materiales inflamables incluyen papel, plástico, agarraderas, telas, recubrimientos para paredes, cortinas y gasolina u otros vapores inflamables y líquidos como grasa o aceite de cocina. Estos materiales pueden prenderse fuego cuando el horno y la placa de cocción están en uso. •• Use vestimenta adecuada.
6 INSTRUCCIONES IMPORTANTES DE SEGURIDAD SEGURIDAD DE LOS NIÑOS •• No toque la superficie caliente entre la parte inferior de la puerta del horno y la parte superior del cajón, en el frente del horno, mientras está en funcionamiento. La superficie se calienta y puede causar quemaduras y otras lesiones. •• No deje a los niños sin supervisión cerca del horno. Advertencia No deje solos a los niños o sin supervisión cerca del electrodoméstico cuando está en funcionamiento o aún caliente.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 7 SUGERENCIAS PARA AHORRAR ENERGÍA •• Cocinar en varios estantes ahorra tiempo y energía. Siempre que sea posible, cocine alimentos que requieran la misma temperatura de cocción en un único horno. •• Para un desempeño óptimo y ahorro de energía, siga las pautas de la página 31 para colocar correctamente los estantes y las bandejas.
8 INSTRUCCIONES IMPORTANTES DE SEGURIDAD •• No utilice agua para apagar incendios provocados por grasa. Si se produce un incendio en el horno, mantenga la puerta del horno cerrada y apague el horno. Si el fuego continúa, arroje bicarbonato de sodio sobre el fuego o utilice un extinguidor. No arroje agua ni harina sobre el fuego. La harina podría ser explosiva y el agua podría hacer que un incendio causado por grasa se propague y genere lesiones personales.
DESCRIPCIÓN GENERAL DEL PRODUCTO 9 DESCRIPCIÓN GENERAL DEL PRODUCTO Piezas Vitrocerámica Controlador de la placa de cocción Perilla de modo del horno Junta Puerta del horno Placa de modelo y número de serie Cajón de calentamiento Accesorios Accesorios incluidos Estante pesado (2 c/u) Limpiador Limpiador para placa de cocción (1 c/u) Estante deslizante (1 c/u) Sonda para carne (1 c/u) Esponja limpiadora Esponja limpiadora para placa de cocción (1 c/u) Botella rociadora (1 c/u) Esponja limpiado
10 INSTALACIÓN INSTALACIÓN Descripción general de la instalación Lea las siguientes instrucciones de instalación en primer lugar, después de comprar este producto o transportarlo a otra ubicación.
INSTALACIÓN 11 Antes de instalar la cocina Si no recibió un soporte antivuelco con su compra, llame al 1-800-243-0000 para recibir uno sin costo. Advertencia Advertencia Es posible que un niño o un adulto inclinen la cocina y el vuelco consecuente les produzca la muerte. Verifique que se haya instalado el soporte antivuelco. Asegúrese de que el soporte antivuelco esté conectado cuando se mueva la cocina. No ponga en funcionamiento la cocina sin el soporte antivuelco colocado.
12 INSTALACIÓN Instalación de la cocina Desembalaje y traslado de la cocina PRECAUCIÓN •• Debe haber dos o más personas para mover e instalar la cocina. (Peligro de peso excesivo) Si no se cumple con esto, se pueden producir lesiones en la espalda u otras lesiones. •• No utilice las manijas de la puerta para empujar ni para tirar de la cocina durante la instalación o al mover la cocina para tareas de limpieza o reparaciones. Hacerlo podría causar daños graves a la puerta de la cocina.
INSTALACIÓN 13 Dimensiones y espacios libres NOTA Guarde para el uso del inspector eléctrico local.
14 INSTALACIÓN Instalación del dispositivo antivuelco Advertencia Utilice un nivelador para verificar sus ajustes. Ubique el nivelador en diagonal sobre el estante el horno y verifique en todas direcciones para nivelar. Riesgo de vuelco Primero verifique la dirección Es posible que un niño o un adulto inclinen la cocina y el vuelco consecuente les produzca la muerte. Verifique que se haya instalado el soporte antivuelco. Asegúrese de que el soporte antivuelco esté conectado cuando se mueva la cocina.
INSTALACIÓN 15 Advertencia •• Deje de 2 a 3 pies (61,0 cm a 91,4 cm) de lugar libre en la línea, para que se pueda mover la cocina si es necesario hacer reparaciones. •• Se prohíbe utilizar un cable de extensión para conectar la cocina a la energía eléctrica. Conecte el cable de alimentación y el enchufe directamente. •• Se requiere una conexión eléctrica a tierra en este electrodoméstico. •• Asegúrese de que el cable de alimentación no esté presionado por la cocina ni por objetos pesados.
16 INSTALACIÓN Conexión con cable de 3 hilos: Cable de alimentación Advertencia •• El hilo del medio (neutro o tierra), que es blanco, de un cable de alimentación de 3 hilos o un conducto de 3 hilos se debe conectar al poste medio del bloque de bornes principal. Los dos hilos restantes del cable de alimentación o del conducto se deben conectar a los postes exteriores del bloque de bornes principal. El no hacerlo podría causar lesiones personales graves, descargas eléctricas o la muerte.
INSTALACIÓN 17 Conexión con cable de 3 hilos: Conducto Conexión con cable de 4 hilos: Conducto Instale el conducto de la siguiente manera: En primer lugar, prepare los hilos del conducto como se indica a continuación. 3 hilos 1" (2,5 cm) Placa de conexión del conducto 4 hilos 31/2" (8,9 cm) 3/8" 1" (2,5 cm) (0,9 cm) 3/8" (0,9 cm) 31/2" (8,9 cm) 3/4" (1,9 cm) o Cable de conexión a tierra 23/4" (6,9 cm) En segundo lugar, instale el pasacables del conducto.
18 INSTALACIÓN Colocación del dispositivo antivuelco •• Mueva la cocina para que quede cerca de la abertura para enchufar en el receptáculo. •• Deslice la cocina en su posición y asegúrese de que la pata trasera se deslice por debajo del soporte antivuelco. La cocina debe quedar bien apoyada contra la pared trasera, cuando está bien instalada. •• Con cuidado, intente inclinar la cocina hacia delante para asegurarse de que el soporte antivuelco esté colocado correctamente.
INSTALACIÓN 19 Prueba de funcionamiento Verifique que la cocina esté bien instalada y realice un ciclo de prueba. Gire la perilla de modo del horno hasta la posición Off para comenzar la prueba. 2 Gire cada perilla hasta la posición Hi para verificar que las hornallas de superficie funcionen correctamente. Las hornallas deben emitir un brillo rojo e irradiar calor y deben cumplir el ciclo de encendido y apagado periódicamente, incluso cuando las perillas estén en la posición Hi.
20 FUNCIONAMIENTO FUNCIONAMIENTO Descripción general del panel de control 1 Hold 3 seconds 2 3 4 5 6 7 1 Smart DiagnosisTM Uso durante la función Smart Diagnosis. 2 Cook Time (Tiempo de cocción) / Clock (Reloj) •• Presione el botón para configurar la cantidad de tiempo que se desea cocinar la comida. El horno se apaga cuando se agota el tiempo de cocción establecido. •• Mantenga presionado el botón durante tres segundos para configurar la hora del día.
FUNCIONAMIENTO 21 Posición de la perilla Después de limpiar las perillas del horno, asegúrese de volver a colocarlas en la posición correcta; de lo contrario podría ocasionar un mal funcionamiento de los quemadores.
22 FUNCIONAMIENTO Cambio de las configuraciones del horno Clock (Reloj) El reloj se debe configurar en la hora correcta del día para que las funciones automáticas del temporizador del horno funcionen de manera adecuada. 1 Coloque la perilla de modo del horno en la posición Off. 2 Mantenga presionado el botón Cook Time durante tres segundos. CLO se muestra en la pantalla. 3 Presione los botones más(+) o menos(-) para seleccionar la hora deseada.
FUNCIONAMIENTO 23 Timer On/Off (Temporizador encendido/apagado) La función Temporizador encendido/apagado sirve de temporizador adicional en la cocina y emite un tono cuando el tiempo configurado se ha agotado. No inicia ni detiene la cocción. Configuración de la Temporizador (por ejemplo para 5 minutos) Coloque la perilla de modo del horno en la posición Off. Mantenga presionado Start Time durante tres segundos.
24 FUNCIONAMIENTO Ajuste de temperatura del horno Ajuste del volumen del indicador sonoro El horno nuevo podría cocinar de manera diferente a su horno anterior. Use el horno nuevo durante algunas semanas para familiarizarse con él antes de cambiar los ajustes de temperatura. Si, después de familiarizarse con el horno, sigue pensando que la temperatura es muy alta o muy baja puede ajustarla. 1 2 Coloque la perilla de modo del horno en la posición Off.
FUNCIONAMIENTO 25 Start Time [Hora de inicio] (Delayed Timed Cook [Cocción temporizada retardada]) Configuración de la Cocción temporizada retardada Por ejemplo, para hornear a 300 °F y retardar el inicio del proceso de horneado hasta las 4:30, primero debe configurar el reloj en la hora correcta del día. 1 Gire la perilla de modo del horno hasta seleccionar el modo Bake. 350 °F aparece en la pantalla. 2 Ajuste la temperatura: presione menos(-) hasta que aparezca 300 °F en la pantalla.
26 FUNCIONAMIENTO Uso de la placa de cocción Uso de las hornallas de la placa de cocción Áreas de cocción Las áreas de cocción de la cocina están identificadas por círculos permanentes en la superficie de vidrio de la placa de cocción. Para una cocción más eficiente, utilice el tamaño correcto de batería de cocina para el tamaño de cada hornalla. La batería de cocina no deben extenderse más de 1/2 a 1 pulgada del área de cocción.
FUNCIONAMIENTO 27 Encendimiento de una hormalla doble En la posición frontal izquierda encontrará una hornalla doble. Utilice la hornalla doble como tal o como una hornalla simple. Empuje hacia dentro la perilla correspondiente. 2-A Gire la perilla en sentido contrario a las agujas del reloj para usarla como hornalla simple. 2-B Gire la perilla en sentido de las agujas del reloj para usarla como hornalla doble.
28 FUNCIONAMIENTO Uso de batería de cocina adecuada Elección de la batería de cocina El tamaño y tipo de batería de cocina influye en los ajustes necesarios para obtener resultados óptimos de cocción. Asegúrese de seguir las recomendaciones para utilizar la batería de cocina adecuada. El material de la batería de cocina determina la uniformidad y la rapidez en que se transfiere el calor de la hornalla al fondo del recipiente.
FUNCIONAMIENTO 29 Uso del horno Uso de los estantes del horno Los estantes tienen un borde posterior doblado hacia arriba que evita que salgan de la cavidad del horno. Antes de usar el horno NOTA Extracción de los estantes •• Es normal que el ventilador de convección funcione durante el precalentamiento en un ciclo normal de horneado. •• El motor del ventilador de convección podría funcionar periódicamente durante un ciclo normal de horneado.
30 FUNCIONAMIENTO Sugerencias de horneado Sugerencias para hornear por convección •• El tiempo y la temperatura de horneado variarán según las características, el tamaño y la forma del recipiente que se utilice para hornear. •• Use el horneado por convección para cocinar más rápido y de manera más pareja en varios estantes: pasteles, galletas, muffins, bizcochos y panes de todo tipo. •• Verifique el punto de cocción de los alimentos en el tiempo mínimo de la receta.
FUNCIONAMIENTO 31 Guía de recomendaciones para hornear y rostizar •• Pasteles en capas 4 •• Pasteles savarín 3 •• Pastel de ángel 3 •• Galletas azucaradas 4 •• Con chispas de chocolate 4 •• Brownies 4 •• Fresca 5 •• Congelada 5 •• Casera 4 •• Refrigerada 4 •• Bizcochos, enlatados 5 •• Bizcochos, caseros 5 •• Muffins 5 •• Frutas azucaradas y crujientes, caseras 4 •• Tartas de frutas con 2 cubiertas, caseras 4 Cremas •• Cheesecake, crème brulée 2 Suflés •• Dulce o salado 2
32 FUNCIONAMIENTO Broil (Asar) La función Asar utiliza el calor intenso de los quemadores superiores para cocinar la comida. Este método de cocción es ideal para cortes de carne tiernos, pescados y verduras finamente cortadas. Algunos modelos pueden contar con un asador híbrido formado por un asador interno que utiliza un calentador de carbón que irradia calor instantáneo y un asador externo tradicional. Durante el funcionamiento normal del asador, es común que estos se apaguen en forma intermitente.
FUNCIONAMIENTO 33 Guía de recomendaciones para asar El tamaño, el peso, el espesor, la temperatura inicial y su preferencia de cocción afectarán el tiempo de asado. Esta guía se basa en carnes a temperatura de refrigerador. Para obtener mejores resultados al asar, use una bandeja especial para asar.
34 FUNCIONAMIENTO Consejos para asar Filete •• Los bistecs y las chuletas siempre se deben dejar reposar durante cinco minutos antes de cortarlos y comerlos. Esto permite que el calor se distribuya uniformemente en el alimento y resulta más tierno y jugoso. •• Los trozos de carne que tengan más de dos pulgadas de espesor deberán retirarse del refrigerador 30 minutos antes de su cocción. Esto permite una cocción más rápida y uniforme, y produce menos humo al asar.
FUNCIONAMIENTO 35 Speed Roast (Rostizado rápido) NOTA •• El tiempo recomendado de cocción es de 60 a 65 minutos para todo el pollo que pesa 3,3 lb. •• Ajuste el tiempo de cocción según el peso de aves. •• Coloque el estande del horno del horno en posición 2. •• La función Rostizado rápido está diseñada para reducir el tiempo de cocción. No es necesario precalentar. •• Esta función está optimizada para cocinar aves, de modo que la temperatura de la función Rostizado rápido no se puede cambiar.
36 FUNCIONAMIENTO Remote Start (Inicio remoto) Sabbath Mode (Modo Sabático) Si el artefacto está registrado en una red de Wi-Fi doméstica, esta función inicia el precalentamiento y luego mantiene la temperatura durante una hora (incluyendo el tiempo de precalentado). Si el aparato no está registrado en la red, aparecerá “OFF” (apagado) en la pantalla. Siga las instrucciones de la página 39 para registrar el artefacto en la red. Modo Sabático es usado en días de descanso Judíos y festivos.
FUNCIONAMIENTO 37 Funcionamiento del cajón de calentamiento Recomendaciones sobre los alimentos y el nivel de potencia del cajón de calentamiento Configuración •• Arrollados (blandos) •• Platos vacíos Medias •• Salsas •• Bizcochos •• Estofados •• Arrollados (duros) •• Huevos •• Verduras El cajón de calentamiento mantiene caliente la comida cocida a la temperatura adecuada para servir.
38 FUNCIONAMIENTO PRECAUCIÓN •• No utilice el cajón de calentamiento para guardar estantes, asaderas, moldes, platos o utensilios. El cajón de calentamiento contiene un quemador que puede dañar cualquier objeto no diseñado específicamente para ser usado dentro del mismo y solo debe usarse para guardar batería de cocina suministrada por LG junto con su cocina. •• No coloque los alimentos ni el papel de aluminio directamente sobre la superficie o la base del cajón de calentamiento.
FUNCIONES INTELIGENTES 39 FUNCIONES INTELIGENTES NOTA Aplicación LG SmartThinQ Previo a utilizar LG SmartThinQ •• Para electrodomésticos con el 1 o logo Utilice un teléfono inteligente para verificar la potencia del enrutador (Red Wi-Fi) cerca del electrodoméstico. • Si la distancia entre el electrodoméstico y el enrutador inalámbrico es muy grande, la señal será débil. Puede que le tome más tiempo registrarse o que falle la instalación.
40 FUNCIONES INTELIGENTES Push Alerts (Alertas automáticas) Active las Alertas Automáticas para recibir notificaciones sobre el estado del aparato. 2 Las notificaciones se activan incluso si la aplicación LG SmartThinQ está apagada. Temporizador Puede configurar el temporizador desde la aplicación. Actualización del Firmware Mantenga actualizado el dispositivo.
FUNCIONES INTELIGENTES 41 6 Mantenga el teléfono en posición hasta que la transmisión de tono haya finalizado. Observe el diagnóstico en el teléfono. NOTA •• La calidad de la función Smart Diagnosis™ depende de la calidad de la llamada local. •• El resultado de la comunicación será mejor y usted podrá recibir un mejor servicio si usa el teléfono fijo de su casa.
42 MANTENIMIENTO MANTENIMIENTO Limpieza de la placa de cocción de vitrocerámica Residuo quemado 1 PRECAUCIÓN •• No use esponjas para fregar ni esponjas abrasivas. Pueden dañar la superficie de la placa de cocción. Mientras la superficie de la placa de cocción esté todavía caliente, retire todos los depósitos quemados o los alimentos derramados en la superficie de vitrocerámica con un raspador metálico adecuado.
MANTENIMIENTO 43 Rayas y marcas del metal Tenga cuidado de no deslizar las ollas ni las sartenes por la placa de cocción. Si lo hace, el metal dejará marcas en la superficie. Para quitar esas marcas, use limpiador para placas de cocción cerámicas con una esponja para placas de cerámica. 2 Si se deja evaporar toda el agua en ollas con una capa delgada de aluminio o cobre, dicha capa puede dejar una coloración negra en la superficie de la placa de cocción.
44 MANTENIMIENTO Consejos de limpieza Guía de instrucciones de EasyClean® •• Permita que el horno se enfríe a temperatura ambiente antes de usar el ciclo EasyClean®. Si la cavidad del horno alcanza una temperatura superior a 150 °F (65 °C), Hot aparecerá en la pantalla y el ciclo EasyClean® no se activará hasta que la cavidad del horno se enfríe. 1 2 Quite los estantes y los accesorios del horno. Raspe y retire los residuos quemados con un raspador plástico.
MANTENIMIENTO 45 7 Sonará un tono al final del ciclo de 10 minutos. Gire la perilla de modo del horno hasta la posición Off para borrar la pantalla y apagar el tono. 8 9 Limpie la cavidad del horno inmediatamente después del ciclo EasyClean®. Para ello, friegue con una esponja o un paño de limpieza húmedos que no rayen. (El lado para refregar no rayará el acabado).
46 MANTENIMIENTO Durante el ciclo de Autolimpieza, no se pueden usar las hornallas de la placa de cocción ni el cajón calentador. NOTA •• Quite los estantes del horno y los accesorios antes de iniciar el ciclo de Autolimpieza. •• Si se dejan los estantes en la cavidad del horno durante el ciclo de Autolimpieza, cambiarán de color y será difícil deslizarlos para ponerlos o sacarlos. Configuración de Autolimpieza con inicio retardado 1 Quite todos los estantes y los accesorios del horno.
MANTENIMIENTO 47 Después del ciclo de Autolimpieza •• La puerta permanece trabada hasta que baja la temperatura del horno. •• Si se dejaron los estantes en el horno y no se deslizan bien después de un ciclo de autolimpieza, aplique a los estantes y sus soportes un poco de aceite vegetal para que se desplacen con facilidad. •• Pueden aparecer líneas finas en la porcelana porque fue sometida al calentamiento y enfriado. Esto normal y no afecta su desempeño.
48 MANTENIMIENTO Limpieza del exterior Reborde decorativo y pintado Para la limpieza general, use un paño con agua jabonosa caliente. En el caso de suciedad más difícil y grasa acumulada, aplique detergente líquido directamente sobre la suciedad. Déjelo reposar allí entre 30 y 60 minutos. Enjuague con un paño húmedo y seque. No use limpiadores abrasivos. Superficies de acero inoxidable Para evitar hacer rayas, no use esponjas de lana de acero.
MANTENIMIENTO 49 Puerta del horno •• Use agua jabonosa para limpiar bien la puerta del horno. Enjuague bien. No sumerja la puerta en agua. •• No use limpiadores para horno, polvos limpiadores ni materiales abrasivos de limpieza en el exterior de la puerta del horno. •• No limpie la junta de la puerta del horno. La junta está hecha de material tejido que es fundamental para lograr un buen sellado. Se debe tener cuidado de no frotar, dañar ni quitar esta junta.
50 MANTENIMIENTO Colocación de la puerta Remoción del cajón 1 Tome firmemente ambos lados de la puerta desde la parte superior. 2 Con la puerta en el mismo ángulo que la posición de remoción, apoye la hendidura de los brazos de las bisagras en el borde inferior de las ranuras de las bisagras. Las muescas de los brazos de las bisagras deben estar totalmente apoyadas en el borde inferior de las ranuras.
SOLUCIÓN DE PROBLEMAS 51 SOLUCIÓN DE PROBLEMAS PREGUNTAS FRECUENTES Nunca utilice papel de aluminio para revestir la base o los costados del horno o el cajón calentador. El papel se derretirá y se pegará a la superficie del fondo del horno y no se podrá quitar. En lugar de eso, coloque una bandeja sobre un estante inferior del horno y úsela para recolectar las gotas. (Si ya se ha derretido papel de aluminio en el fondo del horno, esto no interferirá con el rendimiento del horno).
52 SOLUCIÓN DE PROBLEMAS ¿Por qué no funcionan los botones de función? Asegúrese de que la cocina no esté en modo Bloqueo. El icono del candado aparecerá en la pantalla si el modo bloqueo está activado. Para desactivar el modo de bloqueo, presione Probe durante tres segundos. Suena la melodía de desbloqueo y aparece Loc en la pantalla hasta que los controles se desbloquean. Mi cocina todavía está sucia después de ejecutar el ciclo EasyClean®.
SOLUCIÓN DE PROBLEMAS 53 Antes de llamar al servicio técnico Antes de llamar para solicitar servicio, revise esta lista. Puede ahorrarle tiempo y gastos. La lista incluye sucesos comunes que no son consecuencia de problemas de fabricación ni de los materiales de este aparato. Síntomas Causas / soluciones posibles La cocina no está nivelada. •• Asegúrese de que el piso esté nivelado, sea fuerte y estable para sostener correctamente la cocina.
54 SOLUCIÓN DE PROBLEMAS Síntomas Causas / soluciones posibles •• El enchufe de la cocina no está insertado completamente en el tomacorriente. - Asegúrese de que el enchufe esté conectado a un toma funcional y conectado a tierra. •• Es posible que se haya quemado un fusible o que se haya disparado el disyuntor de su casa. El horno no funciona - Reemplace el fusible o restablezca el disyuntor. •• Los controles del horno están mal configurados. - Consulte la sección Uso del horno.
SOLUCIÓN DE PROBLEMAS 55 Síntomas Causas / soluciones posibles •• Se usó papel de aluminio en la asadera y la rejilla no se colocó correctamente ni se cortó como se recomendó. - Consulte la sección Uso del horno. •• En algunas áreas, el voltaje puede ser bajo. - Precaliente el asador durante 5 a 7 minutos. - Consulte la Guía de recomendaciones para asar. La temperatura del horno es muy alta o muy baja Hay rayas o abrasiones en la superficie de la placa de cocción •• Se debe ajustar el sensor del horno.
56 SOLUCIÓN DE PROBLEMAS Síntomas Causas / soluciones posibles •• El horno está demasiado caliente. La puerta del horno no se abre después de un ciclo de Autolimpieza - Deje que el horno se enfríe a una temperatura inferior a la de bloqueo. •• Espere aproximadamente una hora para que el horno se enfríe después de la finalización de un ciclo de Autolimpieza. La puerta puede abrirse cuando ya no aparezca el candado en la pantalla. •• Es posible que estén bloqueados el control y la puerta.
GARANTÍA 57 GARANTÍA (EE. UU.) Período de garantía Alcance de la garantía Dos (2) años a partir de la fecha de compra minorista original Piezas y mano de obra CÓMO SE MANEJA EL SERVICIO TÉCNICO LG suministrará las piezas y la mano de obra para reparar o reemplazar las piezas defectuosas. •• Los productos y las piezas de repuesto están garantizados durante el tiempo restante del período original de garantía o noventa (90) días, lo que resulte mayor.
58 GARANTÍA •• El retiro y la reinstalación del producto si está instalado en un lugar inaccesible o no está instalado de acuerdo con las instrucciones de instalación publicadas, lo que incluye los manuales de instalación y del propietario de LG. •• Daños resultantes de mal uso, abuso, instalación, reparación o mantenimiento incorrectos. Una reparación incorrecta incluye el uso de piezas no aprobadas o especificadas por LG.
GARANTÍA 59 Problema •• La superficie es despareja. •• El horno está inclinado. Causa Prevención 1. La cocina no está nivelada. •• Verifique primero con el instalador. 2. El dispositivo antivolcadura no se instaló correctamente. Placa de pared 0.65 pulgadas (16.5 mm) Use un nivel de burbuja para comprobar la nivelación. 2 1 El costo de la reparación o el reemplazo en estas circunstancias excluidas estará a cargo del consumidor.
LG Customer Information Center 1-800-243-0000 USA Register your product Online! www.lg.