LGE CDMA Fixed Wireless Terminal LST-250(F) CDMA Fixed Wireless Terminal User Guide Model: LST-250(F) 2
LGE CDMA Fixed Wireless Terminal LST-250(F) REVISED HISTORY DATE ISSUE CONTENTS OF CHANGES 2002.06 ISSUE 1.0 Initial Release Please read this manual before you version of LST-250(F) LGE reserves prior notice. the FWT. Software right REMARK to make use this product. changes changes This manual is based may have occurred after this in technical and 3 on the production printing.
LGE CDMA Fixed Wireless Terminal LST-250(F) Blank 4 Page
LGE CDMA Fixed Wireless Terminal LST-250(F) Table of Contents 1. Before You Start 1.1 1.2 1.3 2. ................................................................................................... ................................................................................................................... ................................................................................................... Introduction Front, Side and Rear View of the Terminal ..................................
LGE CDMA Fixed Wireless Terminal LST-250(F) 5.8 Restrict Call Mode Setting..................................................................................................... Set Restrict Call Level Storing the Permit Dial Number Storing the Deny Dial Number(Restricted dial number)........................................................ ........................................................................................................... ............................................................
LGE CDMA Fixed Wireless Terminal LST-250(F) 1..B eY ar Be effo orre Yo ou uS Stta rtt 1.1 Information Safety Warning To reduce the risk of fire Do not use this product electric shock, do not expose this or swimming pools near or product to rain or moisture. other bodies of water. IMPORTANT Before 1.2 ” Optimal Do not installing or this operating product, read this information.. Phone Performance operate your product when holding the antenna, (ten centimeters) of the antenna.
LGE CDMA Fixed Wireless Terminal LST-250(F) ” Avoid and the unit with any wetting remove the backup battery agent for service. to the service ” Avoid shock ” We recommend you to be ” supply. turn the power off If the unit is immediately inoperable, then return impact. charge discharged during delivery. This device may not this device must cause the before initial backup battery use.
LGE CDMA Fixed Wireless Terminal LST-250(F) n IIn on nttrro od du c cttiio 22. . purchase of the LG Fixed Wireless Terminal that has been designed to operate digital mobile communications technology, Code Division Multiple Access (CDMA). This CDMA digital technology has greatly enhanced voice clarity and can provide various advanced features. The terminal enables the normal operation and direct connection of standard telephone equipment into the cellular network.
LGE CDMA Fixed Wireless Terminal LST-250(F) 2.
LGE CDMA Fixed Wireless Terminal LST-250(F) Mounting Template 2.1.1 Install of Wall ” To mount terminal Mounting on the wall, follow the procedure to install it correctly. to mount terminal with mounting template; select round or panhead type screw; please 1. Determine suitable location 2. Mark the two 3. Drill out the holes with drill bit smaller in diameter than the 4. Secure two 5.
LGE CDMA Fixed Wireless Terminal LST-250(F) 2.2 3 LEDs Indicators COLOR LED Operating GREEN-solid POWER LED DC Power is ORANGE-solid Battery RED-solid SIGNAL LED Low Good ORANGE-solid Poor (0.5sec On (1 sec blink / 0.
LGE CDMA Fixed Wireless Terminal LST-250(F) STEP II. ” Place the Terminal Place the terminal the stable flat on Avoid direct exposure to the ” Read the Safety sun secure lights and surface damp Information located at the first area (desk, table, etc.). area. part of this document before you place the terminal. STEP III.
LGE CDMA Fixed Wireless Terminal LST-250(F) [LST-250(F)] [ Figure 2. Connection Diagram with External Equipment ] *Note: 3 - - G3 Fax can Length between The not connected to your LST-250 terminal. LST-250(F) and Telephone adapter type(with power cord) may ! Connection telephone jack : over be different to data service. 14 1m. by country adaptation.
LGE CDMA Fixed Wireless Terminal LST-250(F) 2.4 Installation Steps Please follow the below procedure to install the unit properly. Connect the Bend the antenna antenna to the up right. TNC connector (Turn right). Connect your phone Connect the Cord. power Terminal Connection Battery Connection ” First, slow down the terminal' slide switch and ” To connect ” Battery connector's battery, unscrew. disassemble terminal like above groove must be slid into the 15 figure.
LGE CDMA Fixed Wireless Terminal LST-250(F) n 33..B on Ba as siic cO erra attiio pe Op Power On 3.1 1. The POWER LED indicates the presents status; Using AC Adapter : Solid Green Using internal battery : Solid ORANGE Using internal battery and battery is week capacity: Solid 1) 2) 3) When the terminal is succeeded in 2. of the strength Lifting Note handset the service, SIGNAL LED indicates the getting signal(Table 1). on telephone, dial tone is heard and you can enter a phone number.
LGE CDMA Fixed Wireless Terminal LST-250(F) 3.4 Ending When you have flash call a completed the call, than about 1 second to end more the handset back place a call and place a on telephone. Also you call without new can hook hanging up the handset. 3.5 A Warning tone may be heard in the warning allowing 3.
LGE CDMA Fixed Wireless Terminal LST-250(F) s 44..S em mF stte Fe ea attu urre es Syys Hook flash 4.1 When the terminal receives automatically allow: 1. For producing dial The 2.
LGE CDMA Fixed Wireless Terminal LST-250(F) Three-way Conference Calls - For three-way conference calls, a hook-flash transmits the SEND command. Please contact your cellular service H provider for information more Example ① Dial the first number and wait until connected; ② When connected, give hook-flash and dial the using on second number and this service.
LGE CDMA Fixed Wireless Terminal LST-250(F) 55..P Prro am mm miin grra g og ng various convenient and various features to LST-250(F) provides how to program these features and to Speed Dial Emergency use them. The followings are user. This chapter main features can describes be used; Call Hot Line Call Wake-up Alarm Conversation Voice Level Outgoing Call Lock G3 Fax receive Restrict Call ? Instruction Programming 2. Lift Handset and press "#" Enter the field number (1 3.
LGE CDMA Fixed Wireless Terminal LST-250(F) Operation 1. Make 2. Lift handset and dial tone will be heard. 3. Press If a speed ' user speed * ' press dial function enable. dial number and wait for dial timeout. button after dialed the number, the terminal make a call immediately. Emergency Call 5.2 LST-250(F) has 3 emergency call numbers (1~3) and max. 32 digits can be stored in each emergency call number. Entering the emergency 1. Press "#"+"#"+"2" 2. Press "#" and 3.
LGE CDMA Fixed Wireless Terminal LST-250(F) Disable the Hot Line Feature 1. Press "#"+"#"+"3" 2. Press "#" and Hot Line Disable code "2". 3. Press "*" continuously to enter Hot Line Press "#"+"#"+"3" 2. Press "#" and Hot Line time code "3". 3. Press "#" and enter desired Hot Line time Note programming mode. the Hot Line Time 1. Press mode. to save. Programming 4. programming "*" continuously to enter Hot Line (2~10seconds). to save.
LGE CDMA Fixed Wireless Terminal LST-250(F) 5.5 Volume Level There are three voice volume levels to be controlled Changing can set the level to the the Volume Level 1. Press "#"+"#"+"5" 2. Press "#" and Volume Level "1" "2" "3" continuously to enter Volume Level programming mode. (1~3),. LOW Level -- MIDDLE Level -- HIGH Level -- Press "*" to save. Before pressing "*", you 5.6 Outgoing If you and you conversation volume. adequate 3.
LGE CDMA Fixed Wireless Terminal LST-250(F) 5.7 G3 FAX Mode Setting by G3 FAX connected to your LST-250F terminal from the other devices (Land or Mobile Data Fax), your service provider should support wireless data FAX. And the LST-250F mode should be changed to G3 FAX mode to change data path from RS-232C to G3 FAX machine. Because the terminal doesn't recognize the call is for FAX or voice before being response. Following is the procedure to change data path and default data path is RS232C data path.
LGE CDMA Fixed Wireless Terminal LST-250(F) 5.8 Restrict Call Mode Setting While the Restrict Call function is enabled, the specified numbers cannot be called. These specified numbers start with specific digits. The specific digits are set according to the following procedure (Storing the Deny dial number). Among these specified numbers you can permit some following procedure (Storing the Permit dial number).
LGE CDMA Fixed Wireless Terminal LST-250(F) 6. sh o 6 .T Trro ou ub blle es oo ottiin g ng In the event you telephone calls, first check the appropriate power wiring connections between the power outlet and the terminal. Check for the appropriate service indication on the LED. If an adequate signal is not present, try different locations for the better signal reception. indication on are unable to the LED.
LGE CDMA Fixed Wireless Terminal LST-250(F) n 77..G en all IIn orrm on Ge ne erra nffo ma attiio 7.1 LST-250(F) Main Unit ” Item Description Tx Frequency 824 Rx Frequency 869 849 MHz ~ 894 MHz ~ Channel Bandwidth 1.25 MHz Frequency Stability ±300Hz Tx Power Max. 0.
LGE CDMA Fixed Wireless Terminal LST-250(F) Licensed by QUALCOMM Incorporated under one or more of the following U.S, Patent No. 4,901,307 U.S, Patent No. 5,056,109 U.S, Patent No. 5,099,204 U.S, Patent No. 5,101,501 U.S, Patent No. 5,103,459 U.S, Patent No.
