OWNER’S MANUAL AIR CONDITIONER Please read this manual carefully before operating your set and retain it for future reference. TYPE : WALL MOUNTED P/No. MFL39754859 LG Electronics India Pvt. Ltd. Registered Office : A-27, Mohan Cooperative Industrial Estate, Mathura Road, New Delhi-110044 www.lg.
(Recommended 24°C is suitable for human body) (Refer page no.
Disposal of your old appliance (as per e-waste Rules) 1. When this crossed out wheeled bin symbol is depicted on the product and its operator’s manual, it means the product is covered by the e-waste Management and Handling Rules , 2011 and are meant to be recycled, dismantled, refurbished or disposed off. 2. Dos a. The product is required to be handed over only to the authorized recycler for disposal. b.
16 ADVANCED FUNCTIONS – Prior to operation – Components – Electrical Safety – Using the remote control Inserting Batteries Installing the remote control holder Wireless Remote Control 13 BASIC FUNCTIONS Cooling your room Heating your room Removing humidity Airing your room Adjusting the fan speed Adjusting the air flow direction Setting the timer – Setting the current time – Turning on the air conditioner automatically at a set time – Turning off the air conditioner automatically at a set time – Cancellin
Prior to Operation Preparing for Operation 1. Contact an installation specialist for installation. 2. Plug in the power plug properly. 3. Use a dedicated circuit. 4. Do not use an extension cord. 5. Do not start/stop operation by plugging/ unplugging the power cord. 6. If the cord/plug is damaged, replace it with only an authorized replacement part. Usage 1. Being exposed to direct airflow for a long time may be hazardous to your health.
Components Symbols used in this Manual This symbol alerts you to the risk of electric shock. This symbol alerts you to hazards that may cause harm to the air conditioner. Notice This symbol indicates special notes. Features WARNING This appliance should be installed in accordance with national wiring regulations. This guide acts as a guide to help to explain product features.
Electrical Safety WARNING • This appliance must be properly grounded. To minimize the risk of electric shock, you must always plug into a grounded outlet. • Do not cut or remove the grounding. • Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the appliance unless the cover screw is metal and not insulated, and the wall receptacle is grounded through the house wiring.
Using the remote control You can operate the air conditioner more conveniently with the remote control. Wireless remote control Air Circulation button Used to circulate the room air without cooling or heating. Sets the sleep mode auto operation. Adjusts the room temperature when cooling and heating. Display Screen - 2 fan speed. FAN M’SOON Control Panel Monsoon mode selection button Use to remove access moisture. M’SOON air flow direction.
BASIC FUNCTIONS Cooling your room Removing humidity (Cooling operation) (Monsoon operation) 1 Press 2 Press This mode removes excess moisture from environment with high humidity or in the rainy season, in order to prevent mold from setting in. This mode adjusts the room temperature and the fan speed automatically to maintain the optimal level of humidity. 1 Press to turn on the power. 2 Press M’SOON to select the monsoon operation. to turn on the power. repeatedly to select the cooling operation.
Airing your room (Air Circulation operation) This mode only circulates the indoor air without changing the room temperature. to turn on the power. 1 Press 2 Fan button : Press FAN turn on the air circulation operation. - is displayed on the display screen. Adjusting the air flow direction 1 To adjust the direction of the flow vertically, press change the air flow direction automatically. - This function is apply for only turn On/Off.
2 Press 3 Press or to select desired time. . to finish. Turning on the air conditioner automatically at a set time 1 Press - The icon below flickers at the bottom of the display screen. time. 2 Press or to select desired times. 3 Press to finish. 4 When setting the timer, current time and ON icon are displayed on the display screen indicating that the ON TIMER is set. Canceling the timer setting 1 Press or to select the timer setting to cancel.
ADVANCED FUNCTIONS The air conditioner offers some additional advanced functions. Changing room temperature quickly ! NOTE Some buttons cannot be used while the auto cleaning function is in operation. Jet Cool(Jet Mode) This mode allows you to cool indoor air quickly in summer or warm it quickly in winter. 1 Press to turn on the power. 2 Press . During Auto Clean function, “Co” will be displayed on the unit. Power saving lamp blink depending on the model.
ADVANCED FUNCTIONS Auto operation (Optional) (Artificial inelligence) Cooling-only models T his operation is basically heating or cooling function of the air conditioner. But during this operation the controller change the operation mode automatically to keep the temperature within ±2 ° C with respect to the setting temperature. Auto Changeover (Optional) Heat pump models this operation is basically heating or cooling function of the air conditioner.
ADVANCED FUNCTIONS 17 (Forced Operation) restart (Optional) 8 Open the front panel upward ON/OFF button Open the front panel upward ON/OFF button Cooling Model Heat pump Model Room Temp. ³ 24°C 21°C ³ Room Temp. < 24°C Room Temp. < 21°C Operating mode Cooling Cooling Healthy Dehumidification Heating Indoor FAN Speed High High High High Setting Temperature 22°C 22°C 23°C 24°C If you want to stop the unit, re-press the power button.
ADVANCED FUNCTIONS Micro Protection filter 1 Micro Protection filter. Use soap solution to clean the heat exchanger coils and the panel vents (consult with technician).
MAINTENANCE 19 Caution : Plz do not press the mesh with finger as shown above
MAINTENANCE Cleaning the Micro Protection Filter (Optional) cleaning the Micro Protection Filter Micro Protection Filter. , - Do not wash the Micro Protection Filter with water because the filter can be damaged. We suggest changing the Micro Protection Filter every 6 months. The location of the filters may differ, depending on the model. For more filters, Please contact the LG service center. (Refer to the warranty card.) The feature can be changed according to type of model.
TROUBLESHOOTING 21
TROUBLESHOOTING Tak-tak noise from indoor unit Contraction or expansion of plastic com- It is a natural phenomenon, and can only ponents due to chan- be reduced but not overcome completely ge in temperature When the air conditioner is not going to be used for a long time. When air conditioner is not going to be used for a long time. When the air conditioner is to be used again. • This will dry out the internal mechanisms. Clean the air filter and install it in the indoor unit.
For any further information, please contact LGEIL Branches BRANCH Ahmedabad BRANCH OFFICE ADDRESS PHONE NO. / FAX NO. LGEIL, 233-234, Platinum Plaza, Nr. Judges Bunglow Cross Road, Bodakdev, Ahmedabad-54 Asansol LGEIL, Block-E, Ist Floor, P C Chattarjee Market, Rambandhu Tala, GT Road (E) Asansol-713303 Aurangabad LGEIL, 302 CIDCO No. 3, Opp. Hotel Ramgiri, Jalna Road, Aurangabad-431003 Bangalore LGEIL, No. 914, 2nd Floor, Shri Venkateshwara Complex, Opp.
