DIGITAL SATELLITE RECEIVER / VIDEO CASSETTE RECORDER OWNER'S MANUAL MODEL : LSV-701W LSV-700W PAL Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.
Safety Precautions / Notes this unit using on SERIAL NUMBER: The serial number is found CAUTION this unit. This number is unique on the back of to this unit and not available to others. RISK OF ELECTRIC SHOCK. DO NOT OPEN. Model No. Serial No. CAUTION: TO REDUCE THE RISK ___________________________________ ___________________________________ OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). Features: NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Table of Contents Introduction 18-19 Operation with Satellite Receiver ViewingGeneralInformation...............18 ProgrammeInformation................18 . SafetyPrecautions.........................2 Notesonusingthisunit.....................2 TableofContents..........................3 FrontPanelandDisplayWindow. . . . . . . . . . . . . .4 RemoteControl............................5 RearPanel................................6 . . . . . . . . . TVorRadioChannelLists..............
Front Panel and Display Window Stop Pause on or Lights Lights on tape / Forward search Display To back sensor playback tape. / Reverse search a Record the in DVB mode. Remote control a Start Rewind input the main step tape. a playback temporarily. repeatedly for frame-by-frame playback. off. in VCR mode. on eject / Press Forward wind Turn the receiver and or sources menu a tape tape. a tape. a to VCR. of VCR. / exit from menu of the receiver.
Remote Control POWER Turn the receiver on or off. 0-9 numerical buttons Select channels or numbered items in menu. EJECT Eject Mute the sound. VOL +/- / Move to the next or page if more than tape. a MUTE Increase list page is available. previous decrease volume level. or PR +/- one the channels. Change REC Record the input sources to VCR. LP Select the recording speed of the REW Rewind tape. / Reverse search a FF tape. Forward wind P/STILL Pause playback temporarily.
Rear Panel Connect the satellite antenna cable to this connector. Output the audio digital signals (S/PDIF). Connect your TV to the receiver via a SCART cable. Connect to a TV with audio inputs or an amplifier. external stereo Connect your TV antenna to this connector. Connect to digital (optical) equipment. audio Connect to power Connect to a a TV with S-Video (DVB source. input.
Connections Tips Depending Rear of this unit (S-Video connection) your TV and other equipment you wish to connect, there are various ways you could connect the unit. on Please refer to the manuals of your TV, Stereo or other devices as necessary to make the PREATION System best connections. Caution -- Make this unit is connected sure Set the TV to the correct video the TV. to a TV Connecting Make directly to the input channel.
Connections (Continued) to Dish Connecting Dish A Fixed Dish LNB To the digital receiver, you can connect either a single satellite antenna directly or through converter box several antennas or LNB of multi-feed equipment. You can connect a further Sat-receiver (for example analogue), with the receiver of common antenna equipment that has satellite signals. Several Fixed Dishes Using DiSEqC Our receiver is designed to be DiSEqC 1.0 compatible.
Before Tuning Operation in a Your TV receives - VCR part video channel signals on your TV from the video recorder like tune it in so channel number a on your TV and or satellite tapes The menu a signal. the controlled from the Remote Control menus are Handset. programme. If you are using a coaxial RF cable you need to select TV channel on your Television and tune it to the Video the main can easily be programmed by using displayed on screen.
Before Operation DVB - part Dish Menu Information Refer to "Menu Structure" page 16. on Setup 1 Press ENTER/OK 2 The following window will appear. The right screen shows the pre-programmed 32 dishes list. If you want to change dish, select the dish on the right screen. Press ENTER/OK in the right screen. Dish number will change. 3 The column on the Dish Setup. Installation the installation, During the bottom of the procedure, Turn can you on your 1 pop-up 2 appear.
Before 6 Operation DVB part If your antenna has connected to the DiSEqC 1.0, select the switch type of "DiSEqC". Option specify Select DiSEqC input. 7 - If you connect of the one type 11.9˚E, Latitude DiSEqC 1.2. You can change position Motor through the "Option". " Go to Position" of - Done - Press ENTER/OK of - equal Move West-East will be will be cursor mode Done is changed : on the change right screen, to left.
Before 2 The Operation - DVB part umn on scan window will appear. The colthe left window shows TV channels and the column on progressing the right screen 2 will shows Radio chan- nels. progressing scan window will appear. When the channel search has been finished, TV & Radio channels that you found will be shown in two columns Channels name in Black is new Channel and channel name in White is the existed one. If The on the screen.
Before 3 Operation The following connected to screen - DVB will appear on part the TV screen target satellite receiver. PREATION SOFTWARE UPGRADE You can upgrade the DVB software. DVB checks whether the new S/W is released when you view channels or select this SOFTWARE UPGRADE menu. If the new version is detected, the DVB will be rebooted automatically and the download screen will appear.
Before Change Operation - DVB part Password You can change the password. Press ENTER/OK on the Change Password of the User Preference, then Password window will appear. Enter "0000" with the numeric buttons, and then enter new password. "0000" is the default value. 4 If the channel that you are going to reserve is a locked channel, Reservation setting is completed after you input password. Press EXIT/i to cancel and get out.
Before Operation - DVB part System Setup 2 Setup You TV select the can display language, Output. audio language, according to quit change the current : own transponder - of the channel. were watching will Channel selection: you select will be displayed in upper right. Audio the value. If you want to listen to AC3 broadcasting, press AUDIO on the Audio Language. Press EXIT/i to when TV channels exist. Means that you get current time from only one fixed channel you specify.
Before Operation DVB - part Even if you can't get correct time by setting TV Channels in TDT mode, you can set up manually current time(year,month,date,hour,min) in USER 5 mode. When you plug out and in, the time you set up will be initialized to 00:00. So, you need to set up TV Channels to get the initial time.
with your video cassette recorder Operation Playing Before video tape a Instant Timer you should ensure that your television and your unit have been plugged in and switched on and that the video channel on your television is selected. starting, Playing a video Press PLAY runs tape N. The television screen will display PLAY. Auto tracking Your video recorder will automatically give you the best picture quality.
Operation with Satellite Receiver Viewing General This section ing TV or the Information explains general listening to Radio. Programme Whenever you press FAV-CH, the channel mode will be changed information while watch- Information Whenever you press INFO, the programme information window will appear for a few seconds. Favorite as follows: Normal ,Favorite 2() Fav.2 ,Favorite When you want to see 1() Fav.1 , 3() Fav.
Operation with Satellite Receiver Language Selection Audio Press Press LANGUAGE on the remote controller to select the desired audio language. Press Up/Down (3/4) to move to a desired audio language and ENTER/OK to select it. The mark indicates the audio being used. You from Audio input can language select a menu if language currently language only the language is desired audio the programme. on Press Up/Down (3/4) to move to other channel.
Additional On Screen Operation - VCR part Video Doctor Display (Self-Diagnosis) You may easily display the tape counter, amount of tape left, audio mode, channel, tape speed and operational This feature informs you that there is a problem with your VCR. These error messages will appear on the TV mode of your VCR will appear on the TV screen. If a recording is taking place these On Screen Displays will screen. not be recorded onto the video 1 Press VCR DISPLAY to The tape tape.
Additional Operation Wide Screen Your unit can VCR part Compatibility record and ratio programmes - play a Recording from another video recorder back wide To record (16:9). 16:9 screen wide aspect screen for- mat programme successfully the correct type of wide screen signal must be broadcasted by the TV station. With this video recorder you an external source, such as recorder on your unit. Press EXIT/i. can make copying recordings from from another video camcorder.
Troubleshooting There may be various reasons for the abnormal procedures shown below. If you can't solve the receiver cover. It may problem cause a after referring dangerous situation even display No panel this trouble shooting, please doesn't The power cord is not Remedy plugged in. Check that the power cable is into the wall outlet. any message. picture or sound. Wrong connection of the Audio/Video output or Wrong connection of the satellite antenna.
Specification Tuner & Demodulator Input Frequency Range RF Input Signal Level RF Impedance 950MHz to 2150 Mhz IF Bandwidth 55MHz/8MHz(Under 5Msps) -25 to -65dBm 75 LNB Power 13/18DC, 14/19V +/-5%, 0.5Amax, 0.8Apeak overload protected LNB Tone Switch 22kHz +/-2kHz, Control DiSEqC Demodulation REF NC +/-0.2V QPSK Rate Symbol 0.6Vpp Version 1.
P/NO : 3834RV0014H
