Owner's Manual

18 Operation and settings
Motion detect
Preview
You can preview the motion detection window on the preview
window.
General
> Sensitivity: Enter the sensitivity to detect an object in motion.
> Save: Click this button to confirm the settings.
How to set the motion detect window
1. Click the [Add] button. The motion detect window is displayed.
You can add the five windows maximum for motion detection
area.
2. Set the [Sensitivity] option.
3. Click the edge or corner of the window box to adjust the
window size for motion detection.
4. Click the [Save] button to save the settings.
Note:
• You can reset the window size. Click one of the window edge or
corner and drag & drop to reset the motion detection area.
• If LSW2010, LDW2010, LVS201 models, Motion Detection can
be activated when at least one of channels (Master/Slave) is
enabled, Video codec is set to H.264 and GOP size is more than
2.
• If not LSW2010, LDW2010, LVS201 models, Motion Detection
can be activated when Master channel is enabled, Video codec
is set to H.264 and GOP size is more than 2.