Owner's Manual

Operation and settings 35
Note:
The parts with the registered mask numbers from AREA1 to AREA4
have the same color. (So do the parts with the numbers from AREA5 to
AREA8.) If you change the mask color, the registered mask color will be
changed automatically with the same color for each of group (AREA1
to AREA4, AREA5 to AREA8).
Special menu settings
D-ZOOM
You can select the digital zoom level.
1. Select [D-ZOOM] option on the [SPECIAL] menu.
2. Use or button to select [ON] then click button. When you
set to ON, the displayed image can be shaking.
3. Use or button to select an option then use or button to
select a level.
• ZOOM: Use or button to enlarge the screen.
• PAN: Use or button to move the screen. (left or right)
• TILT: Use or button to move the screen. (up or down)
D-EFFECT (Digital effect)
You can select the digital effect.
1. Select the [D-EFFECT] option on the [SPECIAL] menu.
2. Use or button to select a digital effect.
• V-FLIP: Flip the picture vertically.
• MIRROR: Turn on the mirror effect.
• ROTATE: Rotate the picture. (180°)
• OFF: Turn off the digital effect.
SHARPNESS
The degree to which the boundary of the two portions is clearly
distinguished.
1. Select the [SHARPNESS] option on the [SPECIAL] menu.
2. Use or button to adjust the option. If you set the sharpness
value to higher, the image outline becomes sharp. If you set to
lower value, the image outline becomes dim.
STABILIZER
The image stabilizer function minimizes the appearance of shaky
images caused by low-frequency vibration.
This function is useful for outdoor surveillance.
Select the [STABILIZER] option and set to ON or OFF.
Note:
If you set the [STABILIZER] to ON, the Digital zoom is set to [x1.1]
automatically.
COLOR
You can switch the displayed picture to gray scale or color.
1. Select the [COLOR] option on the [SPECIAL] menu.
2. Use or button to change a color effect.
• ON: To display the picture with color.