Owner's Manual

50 Operation and settings
Auto return
This function can be used to specify automatic return to a particular
mode if a certain amount of time elapses without any operation being
performed.
1. Select [AUTO RETURN] option on the [SPECIAL] menu.
2. Use or button to set it [ON] and then press button.
3. Select [RETURN TIME] option and then select the auto return time.
4. Select [RETURN] option and press button to exit the setting
menu.
Note:
If you set [AUTO RETURN] to [ON], the [HOME POSITION] option is set
to [OFF] automatically and you can not use it.
(LW9226(I)/LW9228(I) series only)
Tilt limit
You can specify the tilt range. If you set this function, the camera is able
to tilt from 15
º
to 165
º
.
1. Select [TILT LIMIT] option on the [SPECIAL] menu.
2. Use or button to set it [ON]. If you do not want to use this
function, set it to [OFF].
OSD Settings
.
Note:
[DOME ID] is not activated for LNP3700T,LNP2800,LNP2800I models.
User title setting
You can use the camera identification to assign a number and character
to the camera.
1. Select [USER TITLE] option on the [OSD] menu.