Owner's Manual

Contact Ratings

Maximum load current is

±130 mA.

Do not connect any sys-

tem or device that has

over 40 Vp-p (DC 30 V)

bias voltage on the con-

tact terminal.

•

ALARM

COM

Equivalent

Diagram

Note:

Use a relay unit if the voltage or current of the con-

nected device exceeds the ratings.

Connecting Day&Night Switch

Connect the external D&N switch to the D&N terminal.

External D&N

Switch

Day function

When you open the external switch, the D&N function

is set to Day mode.

Connections