Use and Care Guide

14 INSTALLATION
ENGLISH
Reinstalling the Left (Freezer)
Door
1. Lower the door onto the hinge pin of the
means, medium.
2. Make sure the door is aligned with the
interior cabinet.
3. Place the top hinge on the fastener of the
hinge lever and in place. Turn the clockwise
lever and adjustment the hinge.
Disassembling/Assembling the
water lines
4. Reconnect the water lines by inserting
them into the connectors. The water lines
are inserted correctly when only one of the
two guidelines remains visible.
5.Reconnect all of the wire harnesses.
6.Reconnect the ground wire.
7.Hook the tab on the switch side of the
cover under the edge of the wire opening in
the cabinet top. Position the cover in place.
Insert and tighten the cover screw.
Reinstalling the right (Refrigerator)
Door
1. Position the door from the bottom pin of
the hinge.
2. Place the top hinge above the latch the
hinge lever and place it instead. Rotate the
lever in direction counter clockwise and
secure the hinge.
3. Reconnect all harnesses. Hook the tab on
the side switch of the lid, under the edge of
the opening in the top of the cabinet. Place
the lid and replace screw.
NOTE
• Water hoses should be cut leaving a clean and
straight edge to avoid losses.
Bisagra inferior
(1)
(2)
Collet
Tube
Insert lines
Tube
(Correcto) (Incorrecto)