Owner's Manual

7
Introduction
Identication of Camera
“A”
f
g
h
i
j
k
a
b
c
d
e
l
m
a Dome camera body
b Camera mounting bracket
c Fall Prevention Wire
Be sure to hook the fall prevention wire into an
bracket.
Caution:
When you fix the the dome cover to the dome
camera body, you must insert the wire in the dome
camera body. If not, the wire may obstruct the
camera’s moving.
d Mechanics assembly
e Dome cover assembly
f BNC connector cover cap
g Video output cable with BNC connector
Connects with the video connector of the monitor.
h Power cable (AC 24 V)
i Data Communication Port (RJ45) - RS-485 and
Alarm Input
j Data Communication Port (RJ45) - RS-485 and
Alarm Input
k Data Communication Port (RJ45) - Alarm
Output
l IF board
m Main control board
“A”
Do not expose the power and data
cable to moisture, this may cause leak-
age into the housing and damage the camera. If
you must, please make sure that the connections
are sealed tightly.