User guide

30
User title setting
You can use the camera identification to assign a
number and character to the camera (0 - 9, A-Z, a-z).
The USER TITLE is displayed on the upper left of the
screen.
To disappear the user title, select [OFF].
1.
Select [USER TITLE] option on the [SPECIAL]
screen.
2.
Use [Near] or [Far] button to select a [ON] then
press [Open] or [Close]. The USER TITLE menu
appears.
A
3. Use [In], [Out], [Near] or [Far] button to select a
character or number.
- CLR: If you enter the wrong code, select CLR
then press [Open] or [Close].
- POS:
Use [Near] or [Far] button to move posi-
tion of USER TITLE on the screen.
- END:
Confirm your selection.
- A(Blank): Insert a space at the cursor posi-
tion.
-
/ : Moves cursor to left or right.
Language setting
Select a language for setup menu and information
display.
Reset settings
1. Select [RESET] option.
2. Press [Open] or [Close] button and the RESET
menu appears.
3. Use [In] or [Out] to select option.
• FACTORY RESET: Clear certain settings and
information and return to factory default set-
tings.
•
S/W VERSION: Displays the software version
on the monitor.
•
REBOOT: Reboot the camera system.
4. Press [Open] or [Close] to confirm your selection.
LT703P-B.CCHNCLI_ENG_MFL6203470930 30 2009.1.7 10:37:13 AM