Owner's Manual

Operation
37
4
Operation
temperature objects, such as a blue sky or
sunset.
- When the scene is dim.
• AUTO: In this mode, the color temperature range
for the proper white balance is approximately
2,700 - 5,400°K. Proper white balance may not be
obtained under the following conditions:
- When the color temperature is out of the 2,700
- 5,400°K range.
- When the scene mostly contains high color
temperature objects, such as a blue sky or
sunset.
- When the scene is dim.
• ONE PUSH: If you select the ONE PUSH mode,
you will be able to set up the White Balance
automatically using [Open] or [Close] button.
• MANUAL: You can set the white balance options
manually.
- COLOR TEMP: Use [Near] or [Far] button to
select a function.
› INDOOR: The color temperature range for
the proper white balance is approximately
3 200 K.
› OUTDOOR: The color temperature range for
the proper white balance is approximately
5 100 K.
- RED: Set the desired red value. (-100~100)
- BLUE: Set the desired blue value. (-100~100)
Day/Night setting
1. Select [DAY/NIGHT] option on the [CAMERA SET]
menu.
2. Use [Near] or [Far] button to select the mode.
• AUTO: You will be able to change the Day/Night
mode automatically.
- D/N LEVEL: Use [Near] or [Far] button to select a
level.
- DWELL TIME: Use [Near] or [Far] button to select
a dwell time.
NOTE
If you set the AGC to [OFF] or the SHUTTER is set to one
of the SHUTTER options except AUTO on the [EXPOSURE]
menu, the AUTO mode of the DAY/NIGHT function is not
available and [---] mark is displayed.
• DAY: Color mode enabled.
• NIGHT: Black-and-white mode enabled.
3D-DNR setting
1. Select [3D-DNR] option. If pictures are not clear due
to brightness, use this function to reduce the noise of
picture.
2. Use [Near] or [Far] button to select a option.
NOTE
• If you set the AGC to [OFF] on the [EXPOSURE] menu,
the [3D-DNR] function is not available.
• When you use this function, the afterimage may
occur.