Owner’s Manual

Table Of Contents

ENGLISH

ASSEMBLING AND PREPARING

Caution

• Always use genuine components to ensure safety and product performance.

- The product warranty will not cover damage or injury caused by the use of counterfeit components.

• Connect the power cord to the product before you plug it into a wall outlet.

- Plugging the power cord into a wall outlet first may cause an electric shock, which can damage the product.

• When installing or using this product, be cautious of damaging the product or safety accident due to negligence.

• If you do not fully understand the instructions in this manual, do not install the product and contact the service

center.

• Check the accessories provided with the model before installation.

- We will not be responsible for missing or damaged accessories after the internal packaging is damaged.

• Keep out of reach of children, as various safety accidents such as suffocation can occur if an infant or child swallows

the accessories provided with the product.

• Make sure that the screws are completely tightened.

- Tightening the screws with excessive force may damage the wall, degrade the performance and solidity of the

product, or damage the product.

• Do not install display products that are heavier than the designated weight and make sure that external force is not

applied.

• Be cautious of safety accidents when handling tools for installing the product.

• Before installation, remove accessories (watch, bracelet, etc.) that can damage the colored, transparent film.

• Applying excessive force may damage the product.

• There is no problem if fine bubbles are not visible to the naked eye at a distance of 1 m (3.2 feet) from the light-

emitting surface of the product.

Note

• The accessories provided with your product may vary depending on the model.

• Product specifications or contents in this manual may be changed without prior notice due to upgrade of product

functions.

• The warranty will not cover any damage caused by using the product in an excessively dusty environment.

• Up to 4 films are supported per 210 W adapter. (LAT140*, LTAK140-GV*)

• Up to 2 films are supported per 210 W adapter. (LTAK140-GW*)

• Up to 18 1st bezel kits can be connected to a LAN port.

• Up to 26 common bezel kits can be supported by a 1st bezel kit.

• For adapter cable extension, use an approved standard cable.