ENGLISH ESPAÑOL OWNER’S MANUAL GAS RANGE Read this owner’s manual thoroughly before operating the appliance and keep it handy for reference at all times. WARNING If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. ••Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. • • WHAT TO DO IF YOU SMELL GAS - Do not try to light any appliance.
TABLE OF CONTENTS TABLE OF CONTENTS 3 PRODUCT FEATURES 30 31 31 32 33 34 34 35 37 37 37 38 39 4 IMPORTANT SAFETY INSTRUCTIONS 12 PRODUCT OVERVIEW 12 12 Parts Accessories 13 INSTALLATION 13 14 16 16 17 18 18 19 19 20 20 Before Installing the Range Installing the Range Optional Rear Filler Providing Adequate Gas Supply Connecting the Range to Gas Electrical Connections Sealing the Openings Assembling the Surface Burners Checking Ignition of the Surface Burners Leveling the Range Engaging the Anti-ti
PRODUCT FEATURES Multiple Gas Burner Sizes Choose a burner to fit the size of your cookware. Cooking multiple items at once is possible by using different burners at the same time. Safe and Convenient Gas Range Provides safety and convenience for cooking. Self Clean & EasyClean® Useful for easy cleaning. Wok Grate Use the included wok grate to safely support a 12" to 14" round-bottomed wok to stir-fry or saute meats, fish, or vegetables.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read and follow all instructions when using the range to prevent the risk of fire, electric shock, personal injury, or damage. This guide does not cover all possible conditions that may occur. Always contact your service agent or manufacturer about problems that you do not understand. Download this owner's manual at: http://www.lg.com This is the safety alert symbol.
IMPORTANT SAFETY INSTRUCTIONS 5 IMPORTANT SAFETY NOTICE Gas appliances can cause minor exposure to four of these substances, namely benzene, carbon monoxide, formaldehyde and soot, caused primarily by the imperfect combustion of natural or LP gas. Correctly adjusted burners, indicated by a bluish rather than a yellow flame, will minimize imperfect combustion. Exposure to these substances can be minimized by opening windows or using a ventilation fan or hood.
IMPORTANT SAFETY INSTRUCTIONS WARNING •• Never cover any slots, holes or passages in the oven bottom or cover an entire rack with materials such as aluminum foil. Doing so blocks air flow through the oven and may cause carbon monoxide poisoning. Aluminum foil linings may also trap heat, causing a fire hazard. • • Large scratches or impacts to glass doors can lead to broken or shattered glass.
IMPORTANT SAFETY INSTRUCTIONS Have the installer show you the location of the range gas shut-off valve and how to shut it off if necessary. WARNING •• Make sure your range is properly installed and grounded by a qualified installer, according to the installation instructions. Any adjustment and service should be performed only by qualified gas range installers or service technicians.
IMPORTANT SAFETY INSTRUCTIONS WARNING •• To shut off the gas supply to the range, close the range gas shutoff valve by turning it clockwise. Pressure regulator Lever open(use) position Remove this label Adapter(1/2"-14 NPT) Gas Flow into Range Range gas shut-off valve 1/2" Adapter Installer: Inform the consumer of the location of the gas shut-off valve. •• After using your range for an extended period of time high floor temperatures may result.
IMPORTANT SAFETY INSTRUCTIONS •• Be sure that all surface controls are set in the Off position prior to supplying gas to the range. •• Never leave the surface burners unattended at high flame settings. Boilovers may cause smoke and greasy spillovers that may ignite. •• Always turn the knobs to the Lite position when igniting the top burners and make sure the burners have ignited. •• Control the top burner flame size so it does not extend beyond the edge of the cookware. Excessive flame is hazardous.
IMPORTANT SAFETY INSTRUCTIONS BROILER Always use a broiler pan and a grid for excess fat and grease drainage. This will help to reduce splatter, smoke, and flare-ups. WARNING When using your broiler, the temperature inside the oven will be extremely high.
IMPORTANT SAFETY INSTRUCTIONS 11 •• Do not line oven walls or bottom with aluminum foil or allow them to contact exposed heating elements in the oven. Doing so could create a fire hazard or cause damage to the range. •• Do not use the oven for storage. Items stored in the oven can catch on fire. •• Keep the oven free from grease buildup. •• Insert the oven racks in the desired position while the oven is cool.
PRODUCT OVERVIEW PRODUCT OVERVIEW Parts Model & serial number plate Cooktop Oven mode knob Cooktop controller Gasket Upper oven door Rack Lower oven door Accessories Included Accessories Rack (2ea) Gliding rack (1ea) Rear filler (1ea) Owner’s manual (1ea) Wok grate (1ea) Meat probe (1ea) Anchors (6ea) Template (1ea) Griddle (1ea) Anti-tip kit Anti-tip (1ea) Screws (6ea) LP nozzle conversion kit Optional Accessories Cooktop Nozzles (5ea) Oven Nozzles (3ea) Installation guide (1ea) Eas
INSTALLATION 13 ENGLISH INSTALLATION Before Installing the Range Make sure your range is properly installed and grounded by a qualified installer, according to the installation instructions. Any adjustment and service should be performed only by qualified gas range installers or service technicians. In the Commonwealth of Massachusetts •• This product must be installed by a licensed plumber or gas fitter. •• When using ball type gas shut-off valves, they must be the T-handle type.
INSTALLATION Installing the Range Unpacking and Moving the Range CAUTION •• You should use two or more people to move and install the range. (Excessive Weight Hazard) Failure to do so can result in back or other injury. •• Do not use the door handles to push or pull the range during installation or when moving the range out for cleaning or service. Doing so can result in serious damage to the door of the range. Remove packing material, tape and any temporary labels from your range before using.
INSTALLATION 15 Provide proper clearance between the range and adjacent combustible surfaces. These dimensions must be met for safe use of your range. The location of the electrical outlet and pipe opening (see Gas Pipe and Electrical Outlet Locations, page 14) may be adjusted to meet specific requirements. The range may be placed with 0" clearance (flush) at the back wall. Installation Clearances Maximum depth for cabinets above coutertops 30" (76.2 cm) 30" (76.2 cm) Minimum 13" 15" (38.1 cm) 36" (91.
INSTALLATION Installing the Anti-tip Device Anti-tip bracket Screw must enter wood or concrete Wall plate Optional Rear Filler If the counter does not bridge the opening at the rear wall, use the rear filler kit provided with the slide-in range. NOTE If the countertop depth is greater than 25" there will be a gap between the filler kit and the back wall. The anti-tip bracket is packaged with an installation template. The instructions include necessary information to complete the installation.
INSTALLATION 17 Shut off the range gas supply valve before removing the old range and leave it off until the new hook-up has been completed. Because hard piping restricts movement of the range, the use of a CSA International-certified flexible metal appliance connector should be used unless local codes require a hard-piped connection. A manual valve shall be installed in an accessible location in the gas piping external to the appliance for the purpose of turning on or shutting off gas to the appliance.
INSTALLATION Electrical Connections Electrical Requirements 120 Volt, 60 Hz, properly grounded dedicated circuit protected by a 15 or 20 Amp circuit breaker, or slow blow fuse. If an external electrical source is utilized, the appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70. Grounding IMPORTANT: FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED.
INSTALLATION 19 Quality of Flames The combustion quality of the burner flames needs to be confirmed visually. CAUTION A Yellow flames - Call for service. Do not operate the burners without all parts in place. Place the burner caps and heads on the cooktop. Make sure that the caps and heads are placed in the correct locations. There is one small, one medium, one large, one oval (center), and one extra large burner head and cap.
INSTALLATION Checking Operation of Bake / Broil Burners To check ignition of the Bake burner, follow the steps below: 1 Remove all packing from inside the oven cavity. 2 Turn oven mode knob to select Bake. 350 °F appears in the display. 3 Press Start. Leveling the Range Level the range by adjusting the leveling legs. Extending the legs slightly may also make it easier to insert the rear leg into the anti-tip bracket. It may take between 30 and 90 seconds for the burner to start heating.
OPERATION 21 Gas Surface Burners Before Use Read all instructions before using. Make sure that all burners are properly placed. CAUTION WHAT TO DO IF YOU SMELL GAS •• Open windows. •• Do not try to light any appliance. •• Do not touch any electrical switch. •• Do not use any phone in your building. •• Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions. •• If you cannot reach your gas supplier, call the fire department.
OPERATION Burner Locations Using the Gas Surface Burners Your gas range cooktop has four or five sealed gas burners, depending on the model. These can be assembled and separated. Follow the guide below. 1 Be sure that all of the surface burners and grates are placed in the correct positions. 2 Place cookware on the grate. 3 Push the control knob and turn to the Lite position. 4 1 1 2 3 Medium and Large Burners The medium and large burners are the primary burners for most cooking.
OPERATION 23 Using a Wok In case of a power failure, you can light the gas surface burners on your range with a match. If using a wok, use a 14-inch or smaller flat-bottomed wok. Make sure that the wok bottom sits flat on the grate. Surface burners in use when an electrical power failure occurs will continue to operate normally. 1 Hold a lit match to the burner, then push in the control knob. 2 Turn the control knob to the Lo position. CAUTION Use extreme caution when lighting burners with a match.
OPERATION Using the Griddle Preheat the griddle according to the guide below and adjust for the desired setting. Preheat Conditions Cook Setting - 5 (MED) Pancakes HI 5 min. HI Hamburgers HI 5 min. HI Fried Eggs HI 5 min. HI Bacon HI 5 min. HI Breakfast Sausage Links HI 5 min. HI Hot Sandwiches HI 5 min.
OPERATION 25 Do not block, touch or place items around the oven vent during cooking. Before Use Read all instructions before using. Make sure the electrical power cord and the gas valve are properly connected. Your oven is vented through ducts at the center above the burner grate. Do not block the oven vent when cooking to allow for proper air flow. Do not touch vent openings or nearby surfaces during any cooking operation. Confirm the correct usage of the range for the type of food you will cook.
OPERATION Control Panel Overview 1 /RZH U 8SSH U U /RZH /R ZH U 5HPRWH 6WDUW RQ FRPP 2 3 4 5 6 7 1 Smart DiagnosisTM Use during the Smart Diagnosis feature. 2 Cook Time / Clock •• Press the button to set the desired amount of time for food to cook. The oven shuts off when the set cooking time runs out. •• Press and hold button for three seconds to set the time of day. 3 Start Time / Setting •• Press the button to set the delayed timed cook. The oven starts at the set time.
OPERATION 27 Clock The clock must be set to the correct time of day in order for the automatic oven timing functions to work properly. 1 Press and hold Cook Time for three seconds. CLO shows in the display. 2 Press plus(+) or minus(-) to select the desired time. Plus(+) to increase the time and minus(-) to decrease the time. 3 Minimum & Maximum Default Settings All of the features listed have a minimum and a maximum time or temperature setting that can be entered into the control.
OPERATION Timer On/Off Settings The Lower Timer On/Off serves as an extra timer in the kitchen that beeps when the set time has run out. It does not start or stop cooking. Press and hold Start Time for three seconds. Then press the Start Time key repeatedly to toggle through and change oven settings. The Timer On/Off feature can be used during any of the oven control functions.
OPERATION 29 Adjusting the Beeper Volume Your new oven may cook differently from the one it replaced. Use your new oven for a few weeks to become more familiar with it before changing the temperature settings. If after familiarizing yourself with the new oven, you still think that it is too hot or too cold, you can adjust the oven thermostat yourself. 1 Press and hold Start Time for three seconds. Then press Start Time repeatedly until BEEP appears in the display.
OPERATION Start Time (Delayed Timed Cook) Cook Time (Timed Cook) The automatic timer of the Delayed Timed Cook function turns the oven on and off at the time you select. This feature can be used with the Bake, Conv. Bake and Conv. Roast modes. Set the oven to cook for a specific length of time using the Timed Cook feature. This feature can only be used with the Bake, Conv. Bake and Conv. Roast modes.
OPERATION 31 CAUTION •• Adjust the oven racks before turning the oven on to prevent burns. •• Do not cover the racks with aluminum foil, or any other material, or place anything on the bottom of the oven. Doing so will result in poor baking performance and may damage the oven bottom. •• Only arrange oven racks when the oven is cool. Recommended Baking and Roasting Guide •• Center pans on racks for best baking results.
OPERATION Bake Bake is used to prepare foods such as pastries, breads and casseroles. The oven can be programmed to bake at any temperature from 170 °F (80 °C) to 550 °F (285 °C). The default temperature is 350 °F (175 °C). Setting the Bake Function (example, 375 °F) 1 Turn the oven mode knob to select Bake. 2 Set the oven temperature: for example, press plus(+) until 375 °F appears in the display. 3 Press Start. The oven starts to preheat.
OPERATION 33 The convection system uses a fan to circulate heat evenly within the oven. This improves heat distribution and allows for even cooking and excellent results, especially when using multiple racks. Convection cooking can also shorten cooking times. Convection Bake Setting the Conv. Bake Function (example: to Conv. Bake at 350°F) 1 Turn the oven mode knob to select Conv. Bake. 2 Set the oven temperature: press plus(+) until 375 °F appears in the display.
OPERATION Cookware for Convection Cooking Convection Roast Any cookware safe for use in a conventional oven will work in a convection oven. But for best results, keep the following in mind. The Convection Roast feature is designed to give optimum roasting performance. Convection Roast combines cooking with the convection fan to roast meats and poultry. The heated air circulates around the food from all sides, sealing in juices and flavors.
OPERATION 35 Setting the Oven to Broil This oven is designed for closed-door broiling. Broil uses an intense heat radiation from the upper gas burner. The Broil function works best when broiling thin, tender cuts of meat (1" or less), poultry or fish. CAUTION •• Do not use a broiler pan without a grid. The oil can cause a grease fire. •• Do not cover the grid and broiler pan with aluminum foil. Doing so will cause a fire. •• Always use a broiler pan and grid for excess fat and grease drainage.
OPERATION Recommended Broiling Guide The size, weight, thickness, starting temperature, and your preference of doneness will affect broiling times. This guide is based on meats at refrigerator temperature. For best results when broiling, use a pan designed for broiling. Upper oven Food Ground Beef Well done Quantity and/or Thickness Rack First Side Position (minutes) 1 lb. (4 patties) 1/2 to 3/4" thick 2 5-7 3-5 Rare 1" thick 2 4-6 2-3 Medium 1 to 11/2 lbs.
OPERATION 37 Warm This function automatically sets the oven temperature to cook either frozen pizza with regular or rising crust, or freshly made pizza. Simply choose the type of pizza (see chart) and set the desired cook time. This function will maintain an oven temperature of 170 °F. The Warm function will keep cooked food warm for serving up to three hours after cooking has finished. The Warm function may be used without any other cooking operations.
OPERATION Meat Probe The meat probe accurately measures the internal temperature of meat, poultry and casseroles. It should not be used during broiling, self clean, warming or proofing. Always unplug and remove the meat probe from the oven when removing food. Before using, insert the probe into the center of the thickest part of the meat or into the inner thigh or breast of poultry, away from fat or bones. Place food in the oven and connect the meat probe to the jack.
OPERATION 39 Setting Remote Start If the appliance is registered on a home Wi-Fi network, this function starts preheating and then holds the temperature for up to an hour (including preheating time). If the appliance is not registered on the network, “OFF” appears in the display. Follow the instructions on page 40 to register the appliance on the network. 1 Open the oven door to make sure the oven is empty and ready for pre-heating. Close the oven door.
SMART FUNCTIONS SMART FUNCTIONS LG ThinQ Application Before Using LG ThinQ Application 1 This feature is only available on models with the or logo. •• If the distance between the appliance and the wireless router is too far, the signal becomes weak. It takes long time to register or fails to install the application. The LG ThinQ application allows you to communicate with the appliance using a smartphone.
SMART FUNCTIONS 41 •• The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.) •• Smartphone user interface (UI) may vary depending on the mobile operating system (OS) and the manufacturer. •• If the security protocol of the router is set to WEP, network setup may fail. Change the security protocol (WPA2 is recommended), and register the product again.
SMART FUNCTIONS FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the antenna and your body. Users must follow the specific operating instructions for satisfying RF exposure compliance.
MAINTENANCE 43 CAUTION •• Do not clean this appliance with bleach. •• To prevent burns, wait until the cooktop has cooled down before touching any of its parts. •• Always wear gloves when cleaning the cooktop. Removing and Replacing the Gas Surface Burners Grates and burner head / cap can be removed for care and cleaning. Cleaning Burner Heads/Caps For even and unhampered flame, the slits in the burner heads must be kept clean at all times.
MAINTENANCE Burner Grates The range consists of three separate professionalstyle grates. For maximum stability, these grates should only be used when in their proper position. The two side grates can be interchanged from left to right and front to back. The center grate can be interchanged from front to back. Side grate Center grate Side grate Cleaning the Cooktop Surface CAUTION •• To avoid burns, do not clean the cooktop surface until it has cooled. •• Do not lift the cooktop surface.
MAINTENANCE 45 It is best to clean the manifold panel after each use of the range. For cleaning, use a damp cloth and mild soapy water or a 50/50 solution of vinegar and water. For rinsing, use clean water and polish dry with a soft cloth. CAUTION •• Do not use abrasive cleansers, strong liquid cleaners, plastic scouring pads or oven cleaners on the manifold panel. Doing so will damage the finish. •• Do not try to bend the knobs by pulling them up or down, and do not hang a towel or other objects on them.
MAINTENANCE CAUTION Do not use harsh cleaners or harsh abrasive cleaning materials on the outside of the oven door. Doing so can cause damage. Don’t hand clean oven door gasket Do hand clean door Door Care Instructions Most oven doors contain glass that can break. CAUTION •• Do not close the oven door until all the oven racks are fully in place. •• Do not hit the glass with pots, pans, or any other object.
MAINTENANCE 47 Suggested Cleaning Method Example of Oven Soiling Soil Pattern Types of Soils Common Food Items That Can Soil Your Oven Small drops or spots Cheese or other ingredients Pizza Steaks, broiled EasyClean® Fish, broiled Light splatter Fat/grease Medium to heavy splatter Fat/grease Meat roasted at high temperatures Filling or sugar based soils Pies Cream or tomato sauce Casseroles Self Clean* Drops or spots Meat roasted at low temperatures * The Self Clean cycle can be used f
MAINTENANCE 5 Spray or pour the remaining water (8 oz or 240 ml) onto the bottom center of the oven cavity. The indentation on the oven bottom should be fully covered to submerge all soils. Add water if necessary. 9 Clean the oven cavity immediately after the EasyClean® cycle by scrubbing with a wet, non-scratch scouring sponge or pad. (The scouring side will not scratch the finish.
MAINTENANCE 49 The Self Clean cycle uses extremely hot temperatures to clean the oven cavity. While running the Self Clean cycle, you may notice smoking or an odor. This is normal; especially if the oven is heavily soiled. During the Self Clean cycle, the cooktop elements and warming drawer cannot be used. NOTE •• Remove oven racks and accessories before starting the Self Clean cycle. During Self Clean, the kitchen should be well ventilated to minimize the odors from cleaning.
MAINTENANCE Setting Self Clean The Self Clean function has cycle times of 2, 3, or 4 hours. Self Clean Soil Guide Soil Level Cycle Setting Lightly Soiled Oven Cavity 2-Hour Self Clean Moderately Soiled Oven Cavity 3-Hour Self Clean Heavily Soiled Oven Cavity 4-Hour Self Clean 1 Remove all racks and accessories from the oven. 2 Turn the oven mode knob to select Self Clean. The oven defaults to the recommended threehour self clean for a moderately soiled oven.
MAINTENANCE 51 •• The oven door remains locked until the oven temperature has cooled. •• You may notice some white ash in the oven. Wipe it off with a damp cloth or a soap-filled steel wool pad after the oven cools. If the oven is not clean after one self-clean cycle, repeat the cycle. •• If oven racks were left in the oven and do not slide smoothly after a self-clean cycle, wipe racks and rack supports with a small amount of vegetable oil to make them glide more easily.
MAINTENANCE Removing and Replacing the Lift-Off Oven Doors 5 Lift the door up until it is clear of the hinges. about 30° CAUTION •• Be careful when removing and lifting the door. •• Do not lift the door by the handle. The door is very heavy. Upper Oven Replacing the Door Removing the Door 1 Be sure both hinges are in a 30 degree position. 2 Slide the door back onto the hinges until you hear a solid click and the release buttons have engaged. 3 Fully open the door.
MAINTENANCE 53 Replacing the Door Removing the Door 1 Fully open the door. 2 Unlock the hinge locks, rotating them as far toward the open door frame as they will go. 1 Firmly grasp both sides of the door at the top. 2 With the door at the same angle as the removal position, seat the indentation of the hinge arms into the bottom edge of the hinge slots. The notch in the hinge arms must be fully seated into the bottom edge of the slots.
TROUBLESHOOTING TROUBLESHOOTING Can I use aluminum foil to catch drippings in my oven cavity? FAQs Never use aluminum foil to line the bottom or sides of the oven or the warming drawer. The foil will melt and stick to the bottom surface of the oven, and will not be removable. Use a sheet pan placed on a lower oven rack to catch drippings instead. (If foil has already melted onto the bottom of the oven, it will not interfere with the oven’s performance.
TROUBLESHOOTING 55 Is it safe for my convection fan, broil burner or heater element to get wet during EasyClean®? The EasyClean® cycle only helps to loosen light soils in your oven range to assist in hand-cleaning of your oven. It does not automatically remove all soils after the cycle. Some scrubbing of your oven range is required after running the EasyClean® cycle. Yes. The convection fan, broiler burner or heater element may get a little wet during cleaning.
TROUBLESHOOTING Before Calling for Service Before you call for service, review this list. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. Symptoms Possible Cause / Solution •• Make sure that the electrical plug is inserted into a live, properly grounded outlet. Top burners do not light or do not burn evenly. Burner flames are very large or yellow. Surface burners light but the oven does not.
TROUBLESHOOTING 57 The oven is not clean after a Self Clean cycle. Clean and door flash in the display. "Loc" message appears when you want to cook. Possible Cause / Solution •• Incorrect oven control settings. See Self Clean in the MAINTENANCE section. •• The oven was heavily soiled. Clean up heavy spills before beginning the Self Clean cycle. Heavily soiled ovens may need either a longer Self Clean or two Self Clean cycles. •• The self clean cycle has been selected, but the door is not closed.
LIMITED WARRANTY LIMITED WARRANTY (USA) ARBITRATION NOTICE: THIS LIMITED WARRANTY CONTAINS AN ARBITRATION PROVISION THAT REQUIRES YOU AND LG TO RESOLVE DISPUTES BY BINDING ARBITRATION INSTEAD OF IN COURT, UNLESS YOU CHOOSE TO OPT OUT. IN ARBITRATION, CLASS ACTIONS AND JURY TRIALS ARE NOT PERMITTED. PLEASE SEE THE SECTION TITLED “PROCEDURE FOR RESOLVING DISPUTES” BELOW.
LIMITED WARRANTY 59 •• Any noises associated with normal operation. •• Use of accessories, components, or consumable cleaning products that are not authorized by LG. •• Replacement of light bulbs, filters, fuses or any other consumable parts. •• When Product is used for other than normal and proper household use (e.g. commercial or industrial use, offices, and recreational facilities or vehicles) or contrary to the instructions outlined in the Product’s owner’s manual.
LIMITED WARRANTY Problem •• Burner cap color change and lost shine Cause Prevention 1. Scratching 2. Use of detergent or abrasive cleansers •• Do not use steel wool or abrasive cleansers to clean. •• To remove burnt-on food, soak the burner heads in hot water for 20–30 minutes. (Do not use detergent) Shine is lost •• Knobs melt Improper usage •• Do not leave door at stop position during Broil/Bake mode or right after cooking.
LIMITED WARRANTY 61 •• Oven shows error code (F9, F19) but cooktop burners are working. Cause Prevention The gas pressure regulator valve is closed. •• Check that the regulator valve is in the open position. •• If the regulator valve is closed, rotate the lever to open the valve. Lever’s closed position Lever’s closed position •• Flames too big on converted cooktop (NP LP) The installer missed part of the conversion. (Check 3 parts: regulator, cooktop valve, broil/ bake valve.
LIMITED WARRANTY Problem •• Gas smell Cause Prevention Improper connection •• Check with installer first Flexible Connector Hookup Pressure regulator 1/2" Adapter 1/2" Adapter Gas Flow into Range Flex connector (6 ft. max.) Gas shut-off valve 1/2" Adapter 1/2" or 3/4" Gas pipe The cost of repair or replacement under the above excluded circumstances shall be borne by the consumer.
LIMITED WARRANTY 63 Governing Law. The law of the state of your residence shall govern this Limited Warranty and any disputes between us except to the extent that such law is preempted by or inconsistent with applicable federal law. Fees/Costs. You do not need to pay any fee to begin an arbitration.
Memo MEMO
ESPAÑOL MANUAL DEL PROPIETARIO COCINA DE GAS Lea detenidamente el manual del propietario antes de poner el aparto en funcionamiento y consérvelo a mano en todo momento para su referencia. ADVERTENCIA Si no sigue con exactitud la información de este manual, un incendio o descarga eléctrica podrían ser caudados, daños a la propiedad, lesiones personales o la muerte. •• No almacene ni use gasolina ni ningún otro tipo de vapores o líquidos inflamables cerca de este aparato ni de ningún otro aparato.
2 ÍNDICE ÍNDICE 3 CARACTERÍSTICAS DEL PRODUCTO 29 30 4 INSTRUCCIONES IMPORTANTES DE 30 SEGURIDAD 31 12 DESCRIPCIÓN GENERAL DEL 31 PRODUCTO 12 12 32 33 34 34 35 37 37 37 38 39 Piezas Accesorios 13 INSTALACIÓN 13 14 16 16 17 18 18 19 19 20 20 Antes de instalar la cocina Instalación de la cocina Relleno trasero opcional Cómo brindar el suministro adecuado de gas Conexión de la cocina al gas Conexiones eléctricas Sellado de aberturas Ensamblaje de los quemadores de superficie Verificación de ence
CARACTERÍSTICAS DEL PRODUCTO 3 CARACTERÍSTICAS DEL PRODUCTO Varios tamaños de quemadores de gas Elija un quemador que coincida con el tamaño de su batería de cocina. Es posible cocinar varias cosas a la vez si utiliza más de un quemador. ESPAÑOL Cocina de gas segura y conveniente Brinda seguridad y conveniencia para cocinar. Autolimpieza y EasyClean® Útiles para una limpieza sencilla.
4 INSTRUCCIONES IMPORTANTES DE SEGURIDAD INSTRUCCIONES IMPORTANTES DE SEGURIDAD Lea y siga todas las instrucciones cuando utilice la cocina para evitar riesgos de incendios, descargas eléctricas, lesiones personales o daños. Esta guía no incluye todas las situaciones posibles que podrían ocurrir. Siempre comuníquese con su agente de servicio técnico o con el fabricante cuando haya problemas que no comprenda. Descargue este manual del propietario en: http://www.lg.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 5 AVISO IMPORTANTE DE SEGURIDAD Los aparatos de gas causan exposición mínima a cuatro de estas sustancias: benceno, monóxido de carbono, formaldehido y hollín, causados primordialmente por la combustión incompleta de gas natural o gas LP (Propano). Los quemadores bien ajustados, indicados por una llama azul en vez de una llama amarilla, minimizarán la combustión incompleta.
6 INSTRUCCIONES IMPORTANTES DE SEGURIDAD ADVERTENCIA •• Nunca obstruya el flujo del aire de combustión y de ventilación al bloquear la ventilación del horno o las entradas de aire. Al hacerlo, se restringe la entrada de aire al quemador y esto puede provocar envenenamiento por monóxido de carbono. •• Nunca cubra ranuras, aberturas ni conductos del fondo del horno ni un estante completo con materiales como papel de aluminio.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 7 PRECAUCIONES DE SEGURIDAD PARA LA INSTALACIÓN Pida que el instalador le muestre el lugar de la válvula que corta el gas de la cocina y cómo apagarla si fuera necesario. ADVERTENCIA ESPAÑOL •• Haga que un instalador calificado instale y conecte a tierra su cocina de acuerdo con las Instrucciones de instalación. Cualquier ajuste o servicio debe ser completado solo por instaladores de cocinas de gas calificados o técnicos de servicio.
8 INSTRUCCIONES IMPORTANTES DE SEGURIDAD ADVERTENCIA •• Si desea cerrar el paso del gas a la estufa, cierre la válvula de la tubería principal de gas girándola hacia la derecha. Regulador de presión Posición abierta(uso) de palanca Retire esta etiqueta Adaptador (1/2"-14 NPT) Flujo de gas a la estufa Válvula de corte de gas 1/2" Adaptador Instalador: Informe al consumidor la ubicación de la válvula de corte del gas.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 9 PRECAUCIÓN ESPAÑOL •• Asegúrese de que todos los controles de superficie estén en la posición Off antes de suministrar gas a la cocina. •• Nunca deje los quemadores de superficie sin supervisión en ajustes de altas temperaturas. Las salpicaduras o los derrames dejados sobre la cocina pueden arder. • • Coloque siempre las perillas en la posición Lite al encender los quemadores superiores y asegúrese de que se hayan encendido.
10 INSTRUCCIONES IMPORTANTES DE SEGURIDAD ASADOR Siempre use una asadera con rejilla para drenar el exceso de grasa. Esto ayuda a reducir las salpicaduras, el humo y las llamaradas ocasionales. ADVERTENCIA Al usar el asador, la temperatura interior del horno será muy elevada. Tome precauciones para evitar posibles quemaduras.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 11 ADVERTENCIA SUGERENCIAS PARA AHORRAR ENERGÍA •• Cocinar en varios estantes ahorra tiempo y energía. Siempre que sea posible, cocine alimentos que requieran la misma temperatura de cocción en un único horno. •• Para un desempeño óptimo y ahorro de energía, siga las pautas de la página 31 para colocar correctamente los estantes y las bandejas.
12 DESCRIPCIÓN GENERAL DEL PRODUCTO DESCRIPCIÓN GENERAL DEL PRODUCTO Piezas Placa de modelo y número de serie Placa de cocción Perilla de modo del horno Controlador de la placa de cocción Junta Puerta del horno superior Estante Puerta del horno inferior Accesorios Accesorios incluidos Estante (2 c/u) Estante deslizante (1 c/u) Relleno trasero (1 c/u) Manual del propietario (1 c/u) Rejilla para wok (1 c/u) Sonda para carne (1 c/u) Parrilla (1 c/u) Kit antivuelco Antivuelco (1 c/u) Tornillos (
INSTALACIÓN 13 INSTALACIÓN Antes de instalar la cocina En el Commonwealth de Massachusetts •• Un plomero certificado o un instalador de gas deben instalar este producto. •• Cuando utilice válvulas de bola para corte de gas, deben ser del tipo de manija en T. •• Cuando use un conector de gas flexible, no debe superar los 3 pies de longitud.
14 INSTALACIÓN Instalación de la cocina Desembalaje y traslado de la cocina PRECAUCIÓN •• Se necesitan dos o más personas para mover e instalar la cocina. (Peligro de peso excesivo) Si no se cumple con esto, se pueden producir lesiones en la espalda u otras lesiones. •• No utilice las manijas de la puerta para empujar ni para tirar de la cocina durante la instalación o al mover la cocina para tareas de limpieza o reparaciones. Hacerlo podría causar daños graves a la puerta de la cocina.
INSTALACIÓN 15 Dimensiones y espacios libres Deje suficiente espacio entre la cocina y las superficies combustibles adyacentes. Se deben cumplir estas dimensiones para usar de manera segura su cocina. La ubicación del tomacorriente y la abertura de la tubería (consulte Ubicaciones de tubería de gas y tomacorriente eléctrico en la página 14) se deben ajustar para cumplir los requisitos específicos. Se debe instalar la cocina dejando un espacio de 0" (al ras) de la pared posterior.
16 INSTALACIÓN Instalación del dispositivo antivuelco Soporte antivuelco Placa de pared El tornillo debe atravesar la madera o el hormigón Se incluye un soporte antivuelco con una plantilla de instalación. Las instrucciones incluyen la información necesaria para completar la instalación. Lea y siga la hoja de instrucciones de instalación de la cocina. ADVERTENCIA •• Se debe asegurar la cocina con un dispositivo antivuelco aprobado.
INSTALACIÓN 17 Conexión de la cocina al gas 4 Corte el suministro de gas a la cocina con la válvula antes de retirar la cocina antigua y déjela de ese modo hasta que se haya completado la instalación nueva. Debido a que las tuberías rígidas restringen el movimiento de la cocina, se debe utilizar un conector metálico flexible con certificación internacional CSA, excepto en caso de que los códigos locales requieran una conexión de tubería rígida.
18 INSTALACIÓN Conexiones eléctricas Requisitos eléctricos Circuito exclusivo conectado a tierra de forma adecuada de 120 V CA y 60 Hz protegido por interruptor de circuito de 15 o 20 A o fusibles de fusión lenta. No utilice un enchufe adaptador. Desconectar el cable de alimentación genera tensión indebida en el adaptador y genera una falla eventual en el terminal a tierra del adaptador.
INSTALACIÓN 19 Ensamblaje de los quemadores de superficie Calidad de las llamas Debe confirmar visualmente la calidad de combustión de las llamas de los quemadores. A Llamas amarillas - Solicite mantenimiento. PRECAUCIÓN Coloque las tapas de los quemadores y los cabezales sobre la placa de cocción. Asegúrese de que las tapas y los cabezales estén en las ubicaciones correctas.
20 INSTALACIÓN Verificación de funcionamiento de los quemadores para hornear / asar Para verificar el encendido del quemador para hornear, siga los pasos a continuación: 1 Retire todos los materiales de embalaje del interior de la cavidad del horno. 2 Gire la perilla de modo del horno hasta seleccionar el modo Bake. 350 °F aparece en la pantalla. 3 Presione Start. El quemador podría tardar de 30 a 90 segundos para comenzar a calentar.
FUNCIONAMIENTO 21 FUNCIONAMIENTO Quemadores de superficie a gas Lea todas las instrucciones antes de usar. Asegúrese de que todos los quemadores estén ubicados adecuadamente. •• Abra las ventanas. •• No intente encender ningún aparato. •• No toque ningún interruptor eléctrico. •• No use ningún teléfono en su edificio. •• Llame de inmediato al proveedor de gas desde el teléfono de un vecino. Siga las instrucciones del proveedor de gas.
22 FUNCIONAMIENTO Ubicaciones de los quemadores La placa de cocción de su cocina de gas tiene cuatro o cinco quemadores a gas sellados, según el modelo. Estos se pueden ensamblar y separar. Siga la guía a continuación. 4 1 1 2 3 1 Asegúrese de que todos los quemadores de superficie y las rejillas estén colocados en las posiciones adecuadas. 2 Coloque la batería de cocina sobre la rejilla. 3 Empuje la perilla de control y gire hacia la posición Lite.
FUNCIONAMIENTO 23 En caso de apagón Uso de un wok En caso de corte de energía eléctrica, puede encender los quemadores de superficie de su cocina con una cerilla. Si utiliza un wok, use uno de 14 pulgadas o menos con fondo plano. Asegúrese de que la base del wok quede nivelada sobre la rejilla. Los quemadores de superficie que estaban en uso al producirse el apagón seguirán funcionando normalmente. Sostenga una cerilla encendida cerca del quemador, luego empuje la perilla.
24 FUNCIONAMIENTO Uso de la parrilla Precaliente la parrilla según la guía a continuación y ajuste para lograr la configuración deseada.
FUNCIONAMIENTO 25 No bloquee, toque ni coloque elementos alrededor de la ventilación del horno durante la cocción. Antes de usar Su horno se ventila a través de conductos en el centro sobre el quemador. No bloquee la ventilación del horno cuando cocine para permitir un flujo de aire adecuado. No toque las aberturas de ventilación ni las superficies cercanas durante cualquier operación de cocina. Lea todas las instrucciones antes de usar.
26 FUNCIONAMIENTO Descripción general del panel de control 1 /RZH U 8SSH U U /RZH /R ZH U 5HPRWH 6WDUW RQ FRPP 2 3 4 5 6 7 1 Smart DiagnosisTM Uso durante la función Smart Diagnosis. 2 Cook Time (Tiempo de cocción) / Clock (Reloj) •• Presione el botón para configurar la cantidad de tiempo que se desea cocinar la comida. El horno se apaga cuando se agota el tiempo de cocción establecido. •• Mantenga presionado el botón durante tres segundos para configurar la hora del día.
FUNCIONAMIENTO 27 Cambio de las configuraciones del horno Clock (Reloj) 1 Mantenga presionado el botón Cook Time durante tres segundos. CLO se muestra en la pantalla. 2 Presione los botones más(+) o menos(-) para seleccionar la hora deseada. Más(+) para incrementar el tiempo y menos(-) para disminuir el tiempo. 3 Presione Start para introducir la hora e iniciar el reloj. Todas las funciones detalladas tienen un ajuste mínimo y máximo de tiempo o temperatura que puede ingresarse en el control.
28 FUNCIONAMIENTO Timer On/Off (Temporizador encendido/apagado) La función Temporizador inferior encendido/apagado es un temporizador adicional en la cocina que suena cuando ha transcurrido el tiempo configurado. No inicia ni detiene la cocción. Presione el botón para finalizar todas las funciones del horno inferior. Configuración del Temporizador 1 Presione Timer On/Off. En la pantalla aparece 0:00 con las letras HR adentro y parpadea Timer.
FUNCIONAMIENTO 29 Ajuste del volumen del indicador sonoro El horno nuevo podría cocinar de manera diferente a su horno anterior. Use el horno nuevo durante algunas semanas para familiarizarse con él antes de cambiar los ajustes de temperatura. Si, después de familiarizarse con el horno, sigue pensando que la termostato es muy elevada o muy baja, puede ajustarla. 1 Mantenga presionado el botón Start Time durante tres segundos. Luego presione Start Time varias veces hasta que aparezca BEEP en la pantalla.
30 FUNCIONAMIENTO Start Time [Delayed Timed Cook] (Hora de inicio [Cocción temporizada retardada]) El temporizador automático de la función Cocción temporizada retardada enciende y apaga el horno a la hora que usted seleccione. Esta función puede usarse junto con los modos Bake, Conv. Bake y Conv. Roast.
FUNCIONAMIENTO 31 Extracción y colocación de los estantes del horno PRECAUCIÓN •• No cubra los estantes con papel de aluminio ni ningún otro material, ni coloque nada sobre el fondo el horno. Si lo hace, podría generar un proceso de horneado deficiente y dañar la base del horno. •• Acomode los estantes del horno solo cuando el horno esté frío. Extracción de los estantes 1 Con los guantes puestos, sujete el estante del horno*. 2 Tire del estante hacia afuera, sin inclinarlo, hasta que se detenga.
32 FUNCIONAMIENTO Bake (Hornear) La función Hornear se utiliza para preparar alimentos como pasteles, panes y estofados. Es posible programar el horno para hornear a cualquier temperatura entre 170 °F (80 °C) y 550 °F (285 °C). La temperatura predeterminada es 350 °F (175 °C). Configuración de la función Hornear (ejemplo: Bake a 375 °F) 1 Gire la perilla de modo del horno hasta seleccionar el modo Bake.
FUNCIONAMIENTO 33 Modo de convección El sistema de convección usa un ventilador para hacer circular el calor de manera pareja dentro del horno. Esto mejora la distribución del calor y permite una cocción pareja y excelentes resultados, especialmente al usar varios estantes. La cocción por convección también puede acortar los tiempos de cocción. Configuración de la función Conv. Bake (ejemplo: a Conv.
34 FUNCIONAMIENTO Recipientes para cocción por convección Convection Roast (Rostizado por convección) Cualquier recipiente que se pueda usar en un horno convencional funcionará en horno por convección. Para obtener mejores resultados, considere la siguiente información. La función para Rostizar por convección está diseñada para ofrecer resultados de rostizado óptimos. El rostizado por convección combina la cocción con el ventilador de convección para rostizar carnes y aves.
FUNCIONAMIENTO 35 Broil (Asar) Configuración del horno para asar 1 Gire la perilla de modo del horno hasta seleccionar los modos Broil. Presione los botones más(+) o menos(-) para seleccionar Hi o Lo. La función Asar funciona mejor cuando se asan cortes de carne tiernos y finos (1" o menos), aves o pescado. 2 Presione Start. 3 Permita que el asador se precaliente durante cinco minutos. 4 Coloque los alimentos en el horno. 5 Cierre la puerta del horno.
36 FUNCIONAMIENTO Guía de recomendaciones para asar El tamaño, el peso, el espesor, la temperatura inicial y su preferencia de cocción afectarán el tiempo de asado. Esta guía se basa en carnes a temperatura de refrigerador. Para obtener mejores resultados al asar, use una bandeja especial para asar.
FUNCIONAMIENTO 37 Pizza (Pizza) Warm (Calentar) Esta función configura automáticamente la temperatura del horno para cocinar pizza congelada, con masa alta o masa regular, o pizza fresca. Simplemente elija el tipo de pizza (consulte el cuadro) y configure el tiempo de cocción deseado. Esta función mantendrá el horno a una temperatura de 170 °F. La función Calentar mantendrá caliente la comida cocida para servir hasta tres horas después de realizada la cocción.
38 FUNCIONAMIENTO Sonda para carne La sonda para carne mide con precisión la temperatura interna de la carne, las aves y los estofados. No debe utilizarse durante las funciones de asar, autolimpieza o leudar. Desenchufe y extraiga siempre la sonda para carne del horno cuando retire la comida. Antes de usar, inserte la sonda en el centro de la parte más gruesa de la carne o en el muslo interno o la pechuga de las aves, alejada de la grasa o los huesos.
FUNCIONAMIENTO 39 Remote Start (Inicio remoto) 1 Abra la puerta del horno para asegurarse de que esté vacío y listo para el precalentamiento. Cierre la puerta del horno. 2 Dentro de los 30 segundos de haber cerrado la puerta, gire la perilla de modo del horno para seleccionar Inicio remoto. Si pasan más de 30 segundos antes de que inicie el Encendido por control Remoto, aparecerá “door” (puerta) en la pantalla. Si esto ocurre, abra y cierre la puerta y vuelva a intentarlo.
40 FUNCIONES INTELIGENTES FUNCIONES INTELIGENTES Antes de usar la aplicación LG ThinQ 1 •• Si la distancia entre el electrodoméstico y el enrutador inalámbrico es muy grande, la señal será débil. Le tomará más tiempo registrarse o que falle la instalación. Aplicación LG ThinQ Esta característica solo está disponible en el modelo con el logo o . La aplicación LG ThinQ le permite comunicarse con el electrodoméstico usando un teléfono inteligente.
FUNCIONES INTELIGENTES 41 NOTA •• La interfaz del usuario (UI) del teléfono inteligente puede variar según el sistema operativo (OS) y el fabricante. Instalación de la aplicación LG ThinQ Busque la aplicación LG ThinQ en la tienda Google Play o App Store desde su teléfono inteligente. Siga las instrucciones para descargar e instalar la aplicación.
42 FUNCIONES INTELIGENTES Declaración sobre exposición a la radiación de RF de la FCC Este equipo cumple con los límites de exposición a la radiación de la FCC establecidos para entornos no controlados. Este transmisor no se debe ubicar ni operar junto con ninguna otra antena ni transmisor. El equipo se debe instalar y operar con una distancia mínima de 20 cm (7.8 pulg.) entre la antena y su cuerpo.
MANTENIMIENTO 43 MANTENIMIENTO PRECAUCIÓN •• No limpie este electrodoméstico con blanqueador. •• Siempre utilice guantes para limpiar la placa de cocción. Retiro y colocación de los quemadores de superficie de gas Es posible retirar las rejillas y las tapas y los cabezales de los quemadores para limpiarlos y brindarles mantenimiento. Para lograr que la llama salga pareja y libremente, las aberturas en los cabezales de los quemadores deben estar siempre limpias.
44 MANTENIMIENTO Rejillas de los quemadores La cocina incluye tres rejillas profesionales independientes. Para lograr la estabilidad máxima, estas rejillas solo se deben usar en la posición correcta. Las dos rejillas laterales se pueden intercambiar de izquierda a derecha y del frente a la parte posterior. La rejilla central se puede intercambiar del frente a la parte posterior.
MANTENIMIENTO 45 Perillas y panel del múltiple delantero Es mejor limpiar el panel del múltiple cada vez después de usar el horno. Para limpiarlo, use un paño húmedo y una solución de agua jabonosa suave o una solución mitad agua y mitad vinagre. Para enjuagar, use agua limpia y lustre con un paño suave. Reborde decorativo y pintado Para la limpieza general, use un paño con agua jabonosa caliente.
46 MANTENIMIENTO PRECAUCIÓN No use limpiadores fuertes ni materiales abrasivos de limpieza en el exterior de la puerta del horno. Si lo hace, puede dañarlo. No limpie manualmente la junta de la puerta del horno No limpie manualmente la puerta Instrucciones para el cuidado de la puerta La mayoría de las puertas de hornos contienen un vidrio que puede romperse. PRECAUCIÓN •• No cierre la puerta del horno hasta que todos los estantes estén bien colocados en su lugar.
MANTENIMIENTO 47 Cuándo usar EasyClean® Método sugerido de limpieza Ejemplo de suciedad en el horno Tipos de suciedad Alimentos comunes que pueden ensuciar el horno Gotitas o manchitas Queso u otros ingredientes Pizza Bistecs, asados EasyClean® Self Clean* (Autolimpieza) Pescado, asado Salpicadura leve Grasa/aceite Salpicadura mediana a grande Grasa/aceite Carne rostizada a alta temperatura Relleno o suciedad de alimentos con azúcar Tartas Crema o salsa de tomate Estofados Gotas o mancha
48 MANTENIMIENTO 5 Atomice o eche 4/5 (8 oz o 240 ml) de agua abajo, en el centro de la cavidad. La superficie abajo de la estufa debe estar completamente cubierta para mojar todos los residuos. Añade agua si es necesario. 9 Limpie la cavidad del horno inmediatamente después del ciclo EasyClean®. Para ello, friegue con una esponja o un paño de limpieza húmedos que no rayen. (El lado para refregar no rayará el acabado).
MANTENIMIENTO 49 Self Clean (Autolimpieza) El ciclo de Autolimpieza usa temperaturas sumamente altas para limpiar la cavidad del horno. Mientras se ejecute el ciclo de Autolimpieza, es posible que perciba humo u olor. Esto es normal; especialmente si el horno está muy sucio. Durante el ciclo de Autolimpieza, no se pueden usar las hornallas de la placa de cocción ni el cajón calentador. NOTA •• Quite los estantes del horno y los accesorios antes de iniciar el ciclo de Autolimpieza.
50 MANTENIMIENTO Ajuste de autolimpieza La función Autolimpieza tiene ciclos de 2, 3 o 4 horas. Guía de suciedad para autolimpieza Nivel de suciedad Ajuste del ciclo Cavidad del horno levemente sucia Autolimpieza de 2 horas Cavidad del horno moderadamente sucia Autolimpieza de 3 horas Cavidad del horno muy sucia Autolimpieza de 4 horas 1 Quite todos los estantes y los accesorios del horno. 2 Gire la perilla de modo del horno hasta seleccionar el modo Self Clean.
MANTENIMIENTO 51 Después del ciclo de Autolimpieza •• La puerta permanece trabada hasta que baja la temperatura del horno. •• Si se dejaron los estantes en el horno y no se deslizan bien después de un ciclo de autolimpieza, aplique a los estantes y sus soportes un poco de aceite vegetal para que se desplacen con facilidad. •• Pueden aparecer líneas finas en la porcelana porque fue sometida al calentamiento y enfriado. Esto normal y no afecta su desempeño.
52 MANTENIMIENTO Remoción y reemplazo de la puerta removible del horno 5 Levante la puerta hasta que se suelte de las bisagras. aproximadamente 30° PRECAUCIÓN •• Tenga cuidado cuando quite y levante la puerta. •• NO levante la puerta de la manija. La puerta es muy pesada. Horno superior Colocación de la puerta Remoción de la puerta 1 Abra totalmente la puerta. 2 Levante y gire las trabas de las bisagras hacia la bisagra hasta que hagan tope.
MANTENIMIENTO 53 Horno inferior Colocación de la puerta Remoción de la puerta Abra totalmente la puerta. 2 Desbloquee las trabas de las bisagras. Para ello, gírelas alejándolas lo más posible del marco de la puerta abierta. Tome firmemente ambos lados de la puerta desde la parte superior. 2 Con la puerta en el mismo ángulo que la posición de remoción, apoye la hendidura de los brazos de las bisagras en el borde inferior de las ranuras de las bisagras.
54 SOLUCIÓN DE PROBLEMAS SOLUCIÓN DE PROBLEMAS PREGUNTAS FRECUENTES ¿Qué tipo de batería de cocina se recomienda para usar con la placa de cocción? ¿Puedo usar papel de aluminio para que recolecte las gotas en la cavidad del horno? Nunca utilice papel de aluminio para revestir la base o los costados del horno o el cajón calentador. El papel se derretirá y se pegará a la superficie del fondo del horno y no se podrá quitar.
SOLUCIÓN DE PROBLEMAS 55 Mi cocina todavía está sucia después de ejecutar el ciclo EasyClean®. ¿Qué más debo hacer? Probé fregar el horno después de ejecutar EasyClean®, pero hay suciedad que queda. ¿Qué puedo hacer? La función EasyClean® tiene un mejor resultado cuando la suciedad se empapa y sumerge totalmente en agua antes de ejecutar el ciclo y durante la limpieza manual. Si la suciedad no está muy empapada en agua, puede afectar negativamente el desempeño de la limpieza.
56 SOLUCIÓN DE PROBLEMAS Antes de llamar al servicio técnico Antes de llamar para solicitar servicio, revise esta lista. Puede ahorrarle tiempo y gastos. La lista incluye sucesos comunes que no son consecuencia de problemas de fabricación ni de los materiales de este aparato. Síntomas Causas / soluciones posibles •• Asegúrese de que el enchufe esté conectado a un toma funcional y conectado a tierra. Los quemadores superiores no se encienden o no arden de forma pareja.
SOLUCIÓN DE PROBLEMAS 57 Síntomas La puerta del horno no está limpia después de un ciclo de autolimpieza. •• Los controles del horno están mal configurados. Consulte Autolimpieza en la sección MANTENIMIENTO. •• El horno estaba muy sucio. Limpie los derrames importantes antes de comenzar el ciclo de autolimpieza. Los hornos muy sucios pueden necesitar un ciclo de autolimpieza más largo o dos ciclos de autolimpieza. •• Se ha seleccionado el ciclo de autolimpieza, pero la puerta no está cerrada.
58 GARANTÍA LIMITADA GARANTÍA LIMITADA (EE. UU.) AVISO DE ARBITRAJE: ESTA GARANTÍA LIMITADA CONTIENE UNA CLÁUSULA DE ARBITRAJE QUE LE DEMANDA A USTED Y A LG RESOLVER CONFLICTOS A TRAVÉS DE UN ARBITRAJE VINCULANTE EN LUGAR DE HACERLO EN LA CORTE, A MENOS QUE USTED DECIDA NO PARTICIPAR. EN EL ARBITRAJE NO ESTÁN PERMITIDAS LAS ACCIONES COLECTIVAS NI LOS JUICIOS CON JURADO. POR FAVOR, VEA A CONTINUACIÓN LA SECCIÓN TITULADA “PROCEDIMIENTO PARA RESOLVER CONFLICTOS”.
GARANTÍA LIMITADA 59 •• Uso de accesorios, componentes, o productos de limpieza consumibles que no estén autorizados por LG. •• Reemplazo de focos, filtros o cualquier parte consumible. •• Cuando el producto se use de otra forma que no sea uso doméstico usual y normal (p. ej., uso comercial o industrial, en oficinas e instalaciones recreativas o vehículos) o uso contrario a las instrucciones detalladas en el manual del propietario del producto.
60 GARANTÍA LIMITADA Problema •• La tapa del quemador cambió de color y perdió brillo. Causa Prevención 1. Rayas •• No use esponjas metálicas ni limpiadores abrasivos para limpiar. 2. Uso de detergente o limpiadores abrasivos •• Para remover los alimentos quemados, sumerja las cabezas de los quemadores en agua caliente durante 20 a 30 minutos. (No use detergente).
GARANTÍA LIMITADA 61 Problema •• El horno muestra un código de error (F9, F19), pero los quemadores del anafe están funcionando. Causa Prevención La válvula reguladora está cerrada. •• Cheque que el regulador de la válvula este en posición abierta. Posición cerrada de la palanca. Posición cerrada de la palanca. •• Las llamas son demasiado grandes en el anafe convertido (NP LP) El instalador no realizó parte de la conversión. (Revise 3 partes: regulador, válvula del anafe, válvula de asar/hornear).
62 GARANTÍA LIMITADA Problema •• Olor a gas Causa Prevención Conexión incorrecta •• Consulte primero con el instalador. Conexión del conector flexible Regulador de presión 1/2" Adaptador 1/2" Adaptador Flujo de gas a la estufa Conector flexible (6 pies máximo) Válvula de corte de gas 1/2" Adaptador Tubería de gas de 1/2" o 3/4" El costo de reparación o reemplazo bajo las circunstancias excluidas anteriores correrá a cargo del consumidor.
GARANTÍA LIMITADA 63 Legislación vigente. La legislación del estado de su residencia regirá esta Garantía Limitada, así como todas las disputas entre nosotros, salvo que sea invalidada o inconsistente con leyes federales aplicables. Tarifas / Costos. Usted no debe pagar ninguna tarifa para comenzar un arbitraje. Al recibir su solicitud de arbitraje por escrito, LG pagará todos los gastos administrativos rápidamente a la AAA, a menos que usted solicite más de $25,000.
LG Customer Information Center 1-800-243-0000 1-888-542-2623 USA CANADA Register your product Online! www.lg.