Owner's Manual

Repeat pressing button until
icon flash.
1
Press button to select active vane :
1 / 2 / 3 / 4 / All / Standard
Select Vane number using buttons.
Vane number : No. 1, 2., 3, 4, all, or
standard
- Selected vane is in operation.
- Please verify the operating vane.
- To set the angle of all the vanes,
select 'all'.
- To set as the factory default settings,
select 'standard'.
2
Select wind angle using button,
and press button.
- The boundary of wind angle settings
can be changed to 5 levels or 6 levels
according to the product.
- When selecting 'standard' for Vane
number, the wind angle does not move.
3
Set the wind angles for the remaining
vanes as the same as above.
There are products with vanes with
no. 1 and no. 2 only according to the
product types.
4
Press button to exit.
After setup, it automatically
gets out of setup mode if there
is no button input for 60 seconds.
When exiting without pressing set
button, the manipulated value is not
reflected.
5
Press button to complete and
active the setting process.
(Airflow direction function will be
released whenever setting vane angle)
6
Press button to exit or
system will automatically release
without any input after 25
seconds.
7
This function is to adjust angle at which airflow is blow out.
Function setting - Vane Angle Control
44
Ceiling Cassette Air Conditioner
Owner's instruction