Owner's Manual

Programming - Simple Reservation
Press button to enter the
Programming mode.
(the segment flashing)
Ex) Setting Simple Reservation
time as '3'.
1
Press button to adjust reservation
time.
2
Press button to finish setting.
3
Press button to exit.
After setup, it automatically gets out of
setup mode if there is no button input
for 25 seconds.
When exiting without pressing set
button, the manipulated value is not
reflected.
4
You can set the reservation conveniently in the units of 1 hour from 1 hour to 7 hours.
When simple reservation setup, product automatically runs or stops after the time that is set.
49
Owner's Manual
Owner's instruction