Owner's Manual

Ventilation Product User Manual - Single Operation with Direct Expansion Ventilation
button on the remote controller.
It displays as the figure right side in
the direct expansion type ventilation
single operation.
1
Pressing button will change the
ventilation mode.
Pressing the button converts from 'heat
exchange normal automatic'.
2
Pressing button will change
operation mode.
- Pressing the button will convert
from 'cooling eating automatic -> stop'.
3
Pressing button in ventilation
mode changes the strength of wind.
- Pressing the button can select
from 'weak strong very strong'.
Cooling/heating operation selection and the
desired temperature can be adjusted in
direct expansion type ventilation single
operation.
Refer to the basic operation - temperature
adjustment for changing desired
temperature.
4
The 88 segment display above is only displayed
when it is in direct expansion type ventilation
single operation and the air conditioner is
stopped.
Direct expansion type ventilation single operation
Ventilation
mode
Heat
exchange
Normal
Automatic
Remote Controller
Display
Contents
Circulate indoor air without loss of heat
Directly circulate indoor air without going
through heat exchanger
Circulate indoor air with automatically
comparing indoor and outdoor air
Pressing It performs ventilation operation with cooling or heating at the same time using the heat
exchanger inside the direct expansion type ventilation product.
Owner's instruction
62
Ceiling Cassette Air Conditioner