Specification Guide

Due to our policy of continuous product innovation, some specications may change without notication.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
58 | DUCTED
Ceiling-Concealed Ducted System Engineering Manual
Concrete Platform Specifications
Concrete foundations should be made of one part cement, two
parts sand, and four parts gravel.
The surface of the foundation should be finished with mortar with
rounded edges, and weatherproofed.
Figure 38: Close up of Bolt Attachment.
Figure 39: Bolting the LUU247HV Outdoor Unit to the Platform.
Figure 37: Bolting the LUU097HV and LUU127HV Outdoor Units to the
Platform (Appearance May Vary).
Minimum
7-7/8
7-7/8
Minimum
15-3/4
Minimum 24-13/32
Unit: Inch
Bolting the Outdoor Unit to the Platform
Bolting the Outdoor Unit to the Platform Procedure
When installing the outdoor unit onto a concrete or rigid mount, use
a bolt and nut.
1. Ensure that the concrete platform will not degrade easily, and has
enough strength to bear the weight of the unit.
2. Include an H-beam support. Firmly attach the corners, otherwise
the support will bend.
3. Use a hexagon nut.
4. Use anti-vibration material.
5. Include enough space around the concrete foundation for con-
densate drainage.
6. Seal all wiring and piping access holes to prevent bugs from
entering the unit.
All referenced materials are to be field-supplied.
Images are not to scale.
PLACEMENT CONSIDERATIONS
Outdoor Unit
Bolt and
A
nti-vibration
Pad Placement
Refrigerant Piping
Connection Location
Foundation
Top of Outdoor Unit
(Looking Down)
Minimum
7-7/8 inches
Minimum 24-13/32 inches
Minimum 15-3/4 inches
Outdoor Unit Bolt Type Concrete Height Bolt Depth
LUU097HV,
LUU127HV
M10-J
Minimum 3-15/16
inches
Minimum 2-3/8 inches
LUU247HV M10-J
Minimum 7-7/8
inches
LUU367HV M10-J
Table 35: Outdoor Unit Foundation Specications.
Figure 40: Bolting the LUU367HV Outdoor Unit to the Platform.
Figure 41: Platform Mounting.
Minimum
3-15/16
inches
Minimum 22-3/16 inches
Minimum 14-19/32 inches
M10
Anchor Bolt
2-3/8 ~ 4-3/32
25/32
Unit: Inch