Color Video Camera Instruction Manual Models: LV300N-C LV300P-C Before installing, operating or adjusting this product, please read this instruction booklet carefully and completely. V300N_P-C.CSAUBLB_ENG_MFL404 661 1 010.6.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. • Caution: Danger of explosion if battery is incorrectly replaced. Replaced only with the same or equivalent type recommended by the manufacturer.
Important Safety Instructions 1. Read these instructions. - All these safety and operating instructions should be read before the product is operated. 2. Keep these instructions. - The safety, operating and use instructions should be retained for future reference. 3. Heed all warnings. - All warnings on the product and in the operating instructions should be adhered to. 4. Follow all instructions. - All operating and use instructions should be followed. 5. Do not use this apparatus near water.
Important Safety Instructions 9. 10. 11. 12. Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Safety Precautions Do not attempt to disassemble the camera Avoid the camera with direct sunlight Do not use strong solvents or detergents Handle the camera with care To prevent electric shock, do not remove screws or covers. There are no user serviceable parts inside. Ask a qualified service personnel for servicing. Use a dry cloth to the camera when it is dirty. If it is hard to remove the dirt on the camera, use a mild detergent and wipe it gently.
What's in the box Video Cable Camera Body M4 Tapping Screws (2EA) (Pan Lock Screw) Optional V300N_P-C.CSAUBLB_ENG_MFL404 667 7 Adapter (DC 12V, 300mA) 010.6.
Construction Front View Pan Base 6-pin Dip Switch Tilt Base Zoom Lever Tilting Lock Screw Focus Lever Side View Lens Tilting Lock Screw Dome Cover Separatory Spring V300N_P-C.CSAUBLB_ENG_MFL404 66 010.6.
Installation Camera Installation 1. Aim the LG logo of the Dome Camera to face the place that you wish to watch. 2. Tighten the M4 Tapping Screws to fix the Dome Camera on the ceiling, then adjust the Pan (Left /Right) by moving the Pan Base. Tighten the M4 Tapping Screws after adjustment. 3. Loosen the Tilting Lock Screw. Adjust the Tilt(Up /Down) by moving the Tilt Base then tighten Tilting Lock Screw. 4.
Installation Camera Connection Connect the Power Adapter (12V, 300mA; optional) to the Power Input Jack of the camera as shown below. Power Input Jack Power Adapter (Not supplied) Adapter Jack BNC Monitor 10 V300N_P-C.CSAUBLB_ENG_MFL404 6610 10 010.6.
Installation NOTES: • hen you disassemble the Dome Cover, lift the Dome Cover W Separatory Spring on the opposite side of LG Logo and turn the Dome Cover clockwise simultaneously. Dome Cover Separatory Spring • When you install the camera, handle with care. The camera could be damaged by improper handling or storage. • I f this camera is mounted on the other places except ceiling, you need an extra bracket for mounting.(not supplied) V300N_P-C.CSAUBLB_ENG_MFL404 6611 11 11 010.6.
Setup 6-pin Dip Switch Setting This camera has the 6-pin Dip Switch for setting. 3. AWB/HOLD AWB (Auto White Balance), HOLD (White Balance Hold). The default setting is AWB. 4. BLC Backlight compensation eliminates strong background light which makes the camera picture dark such as a spotlight. You can select the mode for adjusting the iris lens. The default setting is OFF. 5. L/L Line-Lock mode, Internal Mode. Line-Lock when using AC24V power. The default setting is INT. 1.
Troubleshooting Check the following guide for the possible cause of a problem before contacting service. The picture is poor Does the Dome Cover have lots of dust on the surface? - Use a dry cloth to clean the camera when it is dirty. Smear may be caused to the screen of night than daytime. - Adjust the Focus by moving the Focus Lens. V300N_P-C.CSAUBLB_ENG_MFL404 6613 13 Contrast of the screen is not clear. Check the condition of the monitor.
Dimension ø100 91mm 10mm 31mm ø121.5 ø90 14 V300N_P-C.CSAUBLB_ENG_MFL404 6614 14 010.6.
Specifications Model Signal System Total / Effective Pixels Pick-Up Device Lens Iris Signal Process Scanning System Sync. System Scanning Frequency Resolution S/N Ratio Standard Illuminance Sensitivity (1/3 output) Video Output Signal Gain Control Exposure Shutter Speed White Balance Back Light Compensation Power Source Power Consumption Operating Temp. Storage Temp. Net Weight Dimensions V300N_P-C.
P/NO: MFL40426631 V300N_P-C.CSAUBLB_ENG_MFL404 6616 16 010.6.
