Owner's Manual

12
6-pin Dip Switch Setting
This camera has the 6-pin Dip
Switch for setting.
1. ELC / ALC
ELC (Electronic IRIS), ALC
(Auto IRIS)
The default setting is ALC.
2. FL (Flickerless)
Use for removing the flicker of
picture.
The default setting is OFF.
3. AWB/HOLD
AWB (Auto White Balance),
HOLD (White Balance Hold).
The default setting is AWB.
4. BLC
Backlight compensation elimi-
nates strong background light
which makes the camera pic-
ture dark such as a spotlight.
You can select the mode for
adjusting the iris lens.
The default setting is OFF.
5. L/L
Line-Lock mode, Internal Mode.
Line-Lock when using AC24V
power.
The default setting is INT.
6. AGC (Auto Gain Control)
If the image are too dark,
change the maximum value to
make the image lighter. The
D&N function is activated auto-
matically AGC ON mode.
The default setting is ON.
Setup
LV300N_P-C.CSAUBLB_ENG_MFL40426612 12 2010.6.11 11:47:31 AM