OWNER'S MANUAL Color Video Camera Please read this manual carefully before operating your set and retain it for future reference.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
• • Caution: Danger of explosion if battery is incorrectly replaced. Replaced only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Holes in metal, through which insulated wires pass, shall have smooth well rounded surfaces or shall be provided with brushings. Warning: Do not install this equipment in a confined space such as a bookcase or similar unit.
Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
Important Safety Instructions 1. Read these instructions. and the point where they exit from the apparatus. 2. Keep these instructions. 3. Heed all warnings. 11. Only use attachments/accessories specified by the manufacturer. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8.
Cautions for Safe Operation Power Supply Operating and storage location This camera must always be operated a AC 24 V or DC 12 V Certified/Listed, class 2 power supply only. Avoid viewing a very bright object (such as light fittings) during an extended period. Avoid operating or storing the unit in the following locations. Note: Be careful of AC frequency when the camera is operated with Line lock mode. Handling of the unit Be careful not to spill water or other liquids on the unit.
Contents Features.................................................................. 8 Part Names and Functions.................................... 9 SENS-UP setting.............................................................26 White Balance settings..........................................................26 Day/Night Setting...................................................................27 Connections......................................................... 11 Motion Detection Setting...............
Features This Color Video Camera is designed for installation in an indoor video surveillance system. This manual contains instructions on how to install and manage the Color Video Camera in your video surveillance system. Should you require any technical assistance, please contact authorized service center. • High resolution and high sensitivity with a 6 mm CCD • 2.
Part Names and Functions a Dome Cover b Lens Cover c Video output connector (BNC type) a d Power input connector Supplies AC 24 V or DC 12 V from an external power source. e Focus lock lever b Fixes the focus position after adjusting. f Setup menu control buttons g Video Out connector c d Use this jack for checking the picture with portable monitor when install the camera.
Part Names and Functions h i j h Azimuth adjuster Adjusts the azimuth angle to obtain a level image. i Azimuth lock screw Fixes the azimuth angle after adjusting. k j Zoom lock lever Fixes the zoom position after adjusting. k Pan lock screw l Fixes the panning position after adjusting. l Camera mounting bracket This bracket is supplied for ceiling installation.
Connections Basic connection 2. Supply AC 24 V or DC 12 V from an external power source. The peripheral devices (VCR, monitor, lens, etc.), AC adapter and cables are not supplied. 1. Connecting the monitor Make the video signal connection between the camera and the monitor or DVR.
Installation Mounting the Camera without bracket This camera can be installed directly on the surface of the wall or ceiling without bracket. 1. 12 Use the installation guide template to check the mounting location. Face the front of the label toward the area of interest. 2. Fasten the camera body to the ceiling.
Installation 3. Assemble the camera cover and camera body. For proper orientation, use the align mark to assemble the camera.
Installation Mounting the Camera with bracket This camera can be installed on the surface of the wall or ceiling using the supplied bracket. 1. 14 Use the installation guide template to check the mounting location. Face the front of the label toward the area of interest. 2. Fasten the camera bracket to the ceiling.
Installation 3. Fasten the camera body to the camera bracket. Tighten the screw to fix the camera body on the bracket. 4. Assemble the camera cover and camera body. For proper orientation, use the align mark to assemble the camera.
Installation Image Adjustment You can manually adjust the pan/tilt/azimuth angles, focus, and zoom while observing the connected monitor. Open Lock Align Open Lock Notes: • Do not hold the camera by lens unit to adjust panning, tilting, or azimuth. • The video output to the BNC will be interrupted while a portable monitor is connected to the video jack. 1. Remove the Dome cover. 2. Remove the lens cover. 3. Connect a portable monitor to the video jack.
Installation 4. Adjust the pan/tilt position of the camera. 5. Adjust the azimuth angle. 5-1. Lock the azimuth angle screw. 4-1. Lock the pan lock screw. 6. Adjust the zoom 6-1. Unlock the zoom lever. 6-2. Move the lever to adjust the zoom.
WIDE TELE Installation WIDE NEAR TELE 6-3. Lock the lever. 7. 7-3. Lock the lever. Adjust the focus 8. Attach the lens cover. 7-1. Unlock the focus lever. 9. Attach the dome cover. 7-2. Move the lever to adjust the focus.
Menu Operation This camera utilizes an on-screen user MENU. To set items on the menu, use the following buttons. • Moves the cursor upwards. Use this button to select an item or adjust the parameters. • RIGHT DOWN button: Moves the cursor downwards. Use this button to select an item or adjust the parameters. UP SET UP button: • LEFT RIGHT button: Moves the cursor to the right. Use this button to select or adjust the parameters of the selected item.
Menu Operation OSD Menu Overview Main Menu The following table shows the list of menu items and options. You can adapt the camera to your requirements by setting up the respective items in these menus. Main Menu Sub Menu Contents CAMERA ID - OFF, 1 to 255 EXPOSURE OFF/WDR/BLC/ HSBLC BRIGHTNESS 0 to 100 AGC OFF/LOW/MIDDLE/ HIGH SHUTTER X512, ... , x2, AUTO, OFF, A.FLK, 1/160, ...
Menu Operation Main Menu 3D-DNR Sub Menu Contents OFF - LOW - MIDDLE - HIGH - OFF MASK NUMBER PRIVACY ON Main Menu Sub Menu Contents OFF D-ZOOM D-EFFECT AREA1 to AREA8 DISPLAY ON/OFF COLOR GRAY, WHITE, BLACK HEIGHT 4 to 100 WIDTH 4 to 100 SPECIAL ZOOM PAN TILT EXIT ON OFF/ V-FLIP/ MIRROR/ ROTATE SHARPNESS 0 to 68 STABILIZER OFF/ ON COLOR OFF/ ON SYNC INT / LL USER TITLE OFF/ ON LANGUAGE ENG/RUS (The supported language can be different depending on the model.
Menu Operation General Operation 1. • • Press [SET] button. The setup menu screen appears on the monitor. TOP: Return to the CAMERA SETTING menu screen. END: Exit the setup menu. Camera Identification Settings You can use the camera identification (CAMERA ID) to assign a number to the camera. 2. Use [UP] or [DOWN] button to select an option then press [SET] button. Submenu appears on the monitor. 3. Use [UP] or [DOWN] button to select a submenu option. 4.
Menu Operation Exposure Settings You can set the exposure options using the EXPOSURE menu. Select [EXPOSURE] option on the [CAMERA SETTING] menu. Press [SET] button and the EXPOSURE menu appears. 1. Select [WDR/BLC] option. 2. Use [LEFT] or [RIGHT] button to select a mode then press [SET]. • WDR/BLC setting Use WDR/BLC option to view the object clearly in backlight conditions.
Menu Operation • HSBLC: Use for masking brightness of the specific area to view the subject more clearly. The HSBLC mode is automatically activated only in low illuminance scene. AREA SETTING: Use [LEFT] or [RIGHT] button to select a area then use [UP] or [DOWN] button to select a ON or OFF. Press [SET] to exit the Area setting menu. > GRAY SCALE: Use [LEFT] or [RIGHT] button to select a gray scale. (GRAYyD.GRAYyBLACK). > USER SCALE: Use [LEFT] or [RIGHT] button to select a bright level.
Menu Operation AGC (Automatic Gain Control) setting SHUTTER (Shutter Speed) setting If the images are too dark, change the maximum [AGC] value to make the images lighter. 1. Select [AGC] option. 2. Use [LEFT] or [RIGHT] button to select a mode. (OFFy LOWyMIDDLEyHIGH) 1. Select [SHUTTER] option. 2. Use [LEFT] or [RIGHT] button to set shutter speed. (AUTO y OFF y A.FLK y 1/160, ... , 1/90 000 y x512, ...
Menu Operation SENS-UP setting Note: If pictures are not clear due to darkness, use for increase the sensitivity of picture. If you set to one of the SHUTTER options except AUTO on the [SHUTTER] menu or [AGC] to [OFF], the [SENS-UP] setting is not available and [---] mark is displayed. White Balance settings You can select one of three modes for white balance adjustment. 1. Use [UP] or [DOWN] button to select [SENS-UP] option. 2. Use [LEFT] or [RIGHT] button to select mode.
Menu Operation • ATW (Auto-Tracing White Balance): The color temperature range for the proper white balance is approximately 1 700 K to 11 000 K. Proper white balance may not be obtained under the following conditions: > > > The color temperature is out of the 1 700 K to 11 000 K range. When the scene contains mostly high color temperature objects, such as a blue sky or sunset. When the scene is dim.
Menu Operation • AUTO: You will be able to change the Day/Night mode automatically. Motion Detection Setting Note: The motion detection detects the moving objects in the scene by monitoring changes in brightness level. You can select the level of sensitivity for motion detection to 4 zone. If you set the AGC to [OFF] or the SHUTTER is set to one of the SHUTTER options except AUTO on the [EXPOSURE] menu, the AUTO mode of the DAY/NIGHT function is not available and [---] mark is displayed.
Menu Operation 5. 6. Use [UP] or [DOWN] to select an option then use [LEFT] or [RIGHT] button to adjust the option. • HEIGHT: Enlarge or decrease the vertical size of the mask. • WIDTH: Enlarge or decrease the horizontal size of the mask. • MOVE Y: Moves vertical position of the mask. • MOVE X: Moves horizontal position of the mask. Use [SENSITIVITY] option to obtain the optimum detection level. 3D-DNR Setting 1. Select [3D-DNR] option.
Menu Operation Privacy Setting This function is aiming at the protection of personal privacy, selecting a screen part black not to be displayed in the screen. Up to 8 zones can be registered. 1. Select [PRIVACY] option. 2. Use [LEFT] or [RIGHT] button to select a [ON] and press [SET]. The PRIVACY SETUP menu appears. 3. Use [LEFT] or [RIGHT] button to select a mask (AREA1 to AREA8) on the [MASK NUMBER]. 4. Use [LEFT] or [RIGHT] button to set up the ON or OFF on the DISPLAY option. 5.
Menu Operation Special Menu Settings This menu lets you adjust and set up D-ZOOM, D-EFFECT, SHARPNESS, COLOR, SYNC, USER TITLE, LANGUAGE function by yourself in the SPECIAL menu. 1. Select [SPECIAL] option. 2. Press [SET] button and the SPECIAL menu appears. Setting the D-ZOOM (Digital Zoom ) level You can select the digital zoom level. 1. Select [D-ZOOM] option on the [SPECIAL] menu. 2. Use [LEFT] or [RIGHT] button to select a [ON] then press [SET] the DIGITAL ZOOM menu appears.
Menu Operation Setting the D-EFFECT (Digital effect) Setting the SHARPNESS effect You can select the digital effect. You can select the sharpness effect. 1. Select [D-EFFECT] option on the [SPECIAL] menu. 1. Select [SHARPNESS] option on the [SPECIAL] menu. 2. Use [LEFT] or [RIGHT] button to select a digital effect. 2. Use [LEFT] or [RIGHT] button to change a adjust the option. 32 • V-FLIP: Flip the picture vertically. • MIRROR: Turn on the mirror effect. • ROTATE: Rotate the picture.
Menu Operation Stabilizer setting Setting the COLOR effect You can select the color effect. The image stabilizer function minimizes the appearance of shaky images caused by low-frequency vibration. 1. This function is useful for outdoor surveillance. 2. Select [STABILIZER] option and set to ON or OFF. Select [COLOR] option on the [SPECIAL] menu. Use [LEFT] or [RIGHT] button to change a color effect. • ON: To display the picture with color. • OFF: To display the picture with grayscale.
Menu Operation Setting the SYNC (Synchronization) The SYNC function is available only with AC power source. 1. Select [SYNC] option on the [SPECIAL] menu. 2. Use [LEFT] or [RIGHT] button to select [INT] or [LL] (Line Lock). • INT: Selects for using the internal synchronization. 2-1. Select [LL] mode and press [SET]. 2-2. Select a desired phase using the [LEFT] or [RIGHT] button. Note: When you use the DC 12 V power, the [SYNC] option is fixed to [INT] mode only.
Menu Operation Language Setting Select a language for the Setup menu and on-screen display. A 3. Use [UP], [DOWN], [LEFT] or [RIGHT] button to select a character or number. • CLR: If you enter the wrong code, select CLR then press [SET]. • POS: Use [UP], [DOWN], [LEFT] or [RIGHT] button to move position of USER TITLE on the screen. 1. Select [LANGUAGE] option on the [SPECIAL] screen. • END: Confirm your selection. 2. Press [LEFT] or [RIGHT] button to select a language.
Menu Operation Reset Settings 1. Select [RESET] option. 2. Press [SET] button and the RESET menu appears. 3. Use [UP] or [DOWN] to select option. 36 • CAMERA REBOOT: To reboot the camera system. • FACTORY RESET: To reset the camera setting to factory setting, select [FACTORY RESET] option.
Specification Item LV803P Signal System PAL LV803N NTSC Total/Effective Pixels 470 000 Pixels / 440 000 Pixels 410 000 Pixels / 380 000 Pixels Pick-up Device 6 mm Interline Color CCD Lens Vari-Focal Lens (f = 2.8 mm to 11 mm / F = 1.2) Iris DC/ELC Selectable Signal Process LG XDI-s Scanning System 2:1 Interlace Synchronization System Scanning Frequency Internal/Line Lock 50 Hz(VD) 59.94 Hz(VD) Resolution 560 Lines S/N Ratio More than 52 dB (AGC Off, F 1.2) Low Luminance 0.
Specification Item LV803P LV803N Exposure Electric Shutter ALC/ELC 1/50 to 1/90 000 (Auto Mode) 1/60 to 1/90 000 (Auto Mode) White Balance ATW / AWC->PUSH / MANUAL Back Light OFF/WDR/BLC/HSBLC WDR 60 dB MOTION DET. OFF/ON Power Consumption Max 3.
AB28
