Color Video Camera Instruction Manual Models : LV903 LV902 LV901 Before installing, operating or adjusting this product, please read this instruction booklet carefully and completely.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
• Holes in metal, through which insulated wires pass, shall have smooth well rounded surfaces or shall be provided with brushings. Warning: Do not install this equipment in a confined space such as a bookcase or similar unit. Warning: Wiring methods shall be in accordance with the National Electric Code, ANSI/NFPA 70. Warning: This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Reset Settings . . . . . . . . . . . . . . . . . . . . . . . . . 33 Cautions for Safe Operation . . . . . . . . . . . . . . . 7 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 34 Part Names and Functions . . . . . . . . . . . . . . . . 8 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Disassembly of the camera . . . . . . . . . . . . . . . 11 Installation . . . . . . . . . . . . . . .
Features This color video camera is designed for use in monitoring system. • Day and Night Function (IR Cut Filter) • Optical x2 varifocal lens • 540 TV lines of horizontal resolution • High sensitivity with a minimum scene illumination of 0.0002 lux (Sens-Up, F1.
Cautions for Safe Operation Power Supply Operating and storage location This camera must always be operated a AC 24V or DC 12V Certified/Listed, class 2 power supply only. Avoid viewing a very bright object (such as light fittings) during an extended period. Avoid operating or storing the unit in the following locations. Note: Be careful of AC frequency when the camera is operated with Line lock mode. Handling of the unit Be careful not to spill water or other liquids on the unit.
Part Names and Functions a b cd a Lens b Azimuth adjuster Adjusts the azimuth angle to obtain a level image. c Lens Cover Hooker Use to separate the Lens Cover. d Pan lock screw Fixes the panning position after adjusting. e Fall Prevention Wire Fixes the wire into the dome cover. f Video Out connector Use this jack for checking the picture with portable monitor when install the camera. e f g g Buttons for menu To set items on the MEMU, use the these buttons.
Part Names and Functions h Dome Cover Ring i Dome Cover h j Lens Cover k Tilting lock screw Fixes the tilting position after adjusting. l Video output connector (BNC type) i m Power input connector Supplies AC 24V or DC 12V from an external power source. j o k l p n Camera mounting bracket This bracket is supplied for ceiling installation. o Focus lock lever Fixes the focus position after adjusting. p Zoom lock lever Fixes the zoom position after adjusting.
Connections Basic connection BNC plug The peripheral devices (VCR, monitor, lens, etc.), AC adapter and cables are not supplied. 1. Connecting the monitor Make the video signal connection between the camera and the monitor or time lapse VCR. 2. AC 24V / DC 12V cable for Camera Video Out Connector for installer 10 Supply AC 24V or DC 12V from an external power source.
Disassembly of the camera 1. Remove the dome cover ring by using the bit. 2. Remove the dome cover by loosening three tamper-proof screws using the supplied bit.
Installation Mounting the Camera without bracket Mounting the Camera with bracket This camera can be installed directly on the surface of the wall or ceiling without bracket. This camera can be installed on the surface of the wall or ceiling using the supplied bracket. Use this pad to install the camera on the bumpy surface.
Image Adjustment You can manually adjust the pan/tilt/azimuth angles, focus, and zoom while observing the connected monitor. Notes: • Do not hold the camera by lens unit to adjust panning, tilting, or azimuth. • The video output to the BNC will be interrupted while a portable monitor is connected to the video jack. 1. Connect a portable monitor to the video jack. 2. Adjust the pan/tilt position of the camera. • Loosen the tilting lock screw. • Loosen the pan lock screws.
Image Adjustment 3. (2) (3) (1) 4. Focus lock lever 5. 6. Zoom lock lever 14 7. Adjust the azimuth angle. • Release the screw (1) locking the azimuth. • Rotate the lens cover (3) to obtain an angle. • Fix the screw locking the azimuth. Remove the lens cover. • Push the lens cover releaser (2). • Rotate the lens cover (3) counterclockwise. Adjust the zoom • Unlock the zoom lever. • Move the lever to adjust the zoom. • Lock the lever. Adjust the focus • Unlock the focus lever.
Menu Operation This camera utilizes an on-screen user MENU. To set items on the menu, use the following buttons. • UP button: Moves the cursor upwards. Use this button to select an item or adjust the parameters. • DOWN button: Moves the cursor downwards. Use this button to select an item or adjust the parameters. • RIGHT button: Moves the cursor to the right. Use this button to select or adjust the parameters of the selected item. The parameter changes each time this button is pressed.
Menu Operation General Operation 1. Press [SET] button. The setup menu screen appears on the monitor. 5. Select [EXIT] option then press [SET] to exit the setup menu. In the submenu, use [UP] or [DOWN] button to select the [EXIT] then use [LEFT] or [RIGHT] button to select a mode and press [SET] to exit the setup menu. • • • 2. Use [UP] or [DOWN] button to select an option then press [SET] button. Submenu appears on the monitor. 3. Use [UP] or [DOWN] button to select a submenu option. 4.
Camera Identification Settings You can use the camera identification (CAMERA ID) to assign a number to the camera. 1. Select [CAMERA ID] option on the [CAMERA SETTING] menu. 2. Use [LEFT] or [RIGHT] to select a CAMERA ID (OFF, 1-255).
Exposure Settings You can set the exposure options using the EXPOSURE menu. Select [EXPOSURE] option on the [CAMERA SETTING] menu. WDR/BLC setting Use WDR/BLC option to set the options for BLC or WDR camera. Press [SET] button and the EXPOSURE menu appears. 1. Select [WDR/BLC] option. 2. Use [LEFT] or [RIGHT] button to select a mode then press [SET]. • • 18 WDR: Set the WDR limit. WDR LIMIT: LOW y MIDDLE y HIGH BLC: Set the BLC limit.
Exposure Settings • HSBLC: Use for making objects clear and obvious by suppressing highlight. The HSBLC mode is automatically activated only in low luminance scene. - AREA SETTING: Use [LEFT] or [RIGHT] button to select a area then use [UP] or [DOWN] button to select a ON or OFF. Press [SET] to exit the Area setting menu. - GRAY SCALE: Use [LEFT] or [RIGHT] button to select a gray scale. (GRAYyD.GRAYyBLACK). - USER SCALE: Use [LEFT] or [RIGHT] button to select a bright level.
Exposure Settings AGC (Automatic Gain Control) setting SHUTTER (Shutter Speed) setting If the images are too dark, change the maximum [AGC] value to make the images lighter. 1. Select [AGC] option. 2. Use [LEFT] or [RIGHT] button to select a mode. (OFFy LOWyMIDDLEyHIGH) 20 1. Select [SHUTTER] option. 2. Use [LEFT] or [RIGHT] button to set shutter speed. (AUTOy OFF y A.
Exposure Settings SENS-UP setting Note: If pictures are not clear due to darkness, use for increase the sensitivity of picture. If you set to one of the SHUTTER options except AUTO on the [SHUTTER] menu, the [SENS-UP] setting is not available and [---] mark is displayed. 1. Use [UP] or [DOWN] button to select [SENS-UP] option. 2. Use [LEFT] or [RIGHT] button to select a [AUTO]. To setting the [AUTO] function, select the [AUTO] on the [SHUTTER]. 3.
White Balance Settings Setting the WB (White Balance) Mode 1) You can select one of three modes for white balance adjustment. The color temperature is out of the 1700 - 11000K range. 2) When the scene contains mostly high color temperature objects, such as a blue sky or sunset. 3) When the scene is dim. 1. Select [WHITE BAL] option. 2. Use [LEFT] or [RIGHT] button to select one of three modes for white balance then press [SET].
White Balance Settings - COLOR TEMP: Use [LEFT] or [RIGHT] button to select a funtion. (INDOOR: 3200, OUTDOOR: 5100) - RED: Obtains the optimum amount of red gain. - BLUE: Obtains the optimum amount of blue gain.
Day/Night Setting Note: If you set the AGC to [OFF] or the SHUTTER is set to one of the SHUTTER options except AUTO on the [EXPOSURE] menu, the AUTO mode of the DAY/NIGHT function is not available and [---] mark is displayed. 1. Select [DAY/NIGHT] option. 2. Use [LEFT] or [RIGHT] button to select mode for day/night function. • 24 AUTO: You will be able to change the Day/ Night mode automatically. - LEVEL: Use [LEFT] or [RIGHT] button to select a level.
Motion Detection Setting The motion detection detects the moving objects in the scene by monitoring changes in brightness level. You can select the level of sensitivity for motion detection to 4 zone. 5. 6. 1. Select [MOTION DET] option. 2. Use [LEFT] or [RIGHT] button to select a [ON] and press [SET]. The MOTION DETECTION menu appears. 3. Use [LEFT] or [RIGHT] button to select a zone number (AREA1 ~ AREA4) on the [ZONE NUMBER]. 4.
3D-DNR Setting 1. Select [3D-DNR] option. If pictures are not clear due to brightness, use for reduce the noise of picture. 2. Use [LEFT] or [RIGHT] button to select a option. (OFFyLOWyMIDDLEyHIGH) Notes: • If you set the AGC to [OFF] on the [EXPOSURE] menu, the [3D-DNR] function is not available and [---] mark is displayed. • When you use this function, the afterimage may occur.
Privacy Setting This function is aiming at the protection of personal privacy, selecting a screen part black not to be displayed in the screen. Up to 8 zones can be registered. 1. Select [PRIVACY] option. 2. Use [LEFT] or [RIGHT] button to select a [ON] and press [SET]. The PRIVACY SETUP menu appears. 3. Use [LEFT] or [RIGHT] button to select a mask (AREA1 ~ AREA8) on the [MASK NUMBER]. 4. Use [LEFT] or [RIGHT] button to set up the ON or OFF on the DISPLAY option. 5.
Special Menu Settings This menu lets you adjust and set up D-ZOOM, D-EFFECT, SHARPNESS, COLOR, SYNC, USER TITLE, LANGUAGE function by yourself in the SPECIAL menu. 1. Select [SPECIAL] option. 2. Press [SET] button and the SPECIAL menu appears. Setting the D-ZOOM (Digital Zoom ) level You can select the digital zoom level. 28 1. Select [D-ZOOM] option on the [SPECIAL] menu. 2. Use [LEFT] or [RIGHT] button to select a [ON] then press [SET] the DIGITAL ZOOM menu appears.
Special Menu Settings Setting the D-EFFECT (Digital effect) Setting the SHARPNESS effect You can select the digital effect. You can select the sharpness effect. 1. Select [D-EFFECT] option on the [SPECIAL] menu. 1. Select [SHARPNESS] option on the [SPECIAL] menu. 2. Use [LEFT] or [RIGHT] button to select a digital effect. 2. Use [LEFT] or [RIGHT] button to change a adjust the option. • V-FLIP: Flip the picture vertically. • MIRROR: Turn on the mirror effect. • ROTATE: Rotate the picture.
Special Menu Settings Stabilizer setting Setting the COLOR effect You can select the color effect. The image stabilizer function minimizes the appearance of shaky images caused by low-frequency vibration. This function is useful for outdoor surveillance. Select [STABILIZER] option and set to ON or OFF. Note: If you set the [STABILIZER] to ON, the Digital zoom is set to [x1.1] automatically. 30 1. Select [COLOR] option on the [SPECIAL] menu. 2. Use [LEFT] or [RIGHT] button to change a color effect.
Special Menu Settings Setting the SYNC (Synchronization) The SYNC function is available only with AC power source. 1. Select [SYNC] option on the [SPECIAL] menu. 2. Use [LEFT] or [RIGHT] button to select [INT] or [LL] (Line Lock). • INT: Selects for using the internal synchronization. - Select [LL] mode and press [SET]. - Select a desired phase using the [LEFT] or [RIGHT] button. Note: When you use the DC 12V power, the [SYNC] option is fixed to [INT] mode only.
Special Menu Settings 1. Select [USER TITLE] option on the [SPECIAL] screen. 2. Use [LEFT] or [RIGHT] button to select a [ON] then press [SET]. The USER TITLE menu appears. - / : Moves cursor to left or right. Language Setting Select a language for the Setup menu and on-screen display. A 3. Use [UP], [DOWN], [LEFT] or [RIGHT] button to select a character or number. - 32 CLR: If you enter the wrong code, select CLR then press [SET].
Reset Settings 1. Select [RESET] option. • 2. Press [SET] button and the RESET menu appears. CAMERA REBOOT: To reboot the camera system. • 3. Use [UP] or [DOWN] to select option. FACTORY RESET: To reset the camera setting to factory setting, select [FACTORY RESET] option.
Specifications Model LV903P LV903N LV902P LV902N LV901P LV901N Total/Effective Pixels 470K/440K Pixels 410K/380K Pixels 470K/440K Pixels 410K/380K Pixels 470K/440K Pixels 410K/380K Pixels Pick-up Device 1/3" Interline Color CCD Lens Vari-Focal Lens (f = 2.8 ~ 11mm / F = 1.2) Iris DC/ELC Selectable Signal Process LG XDI-s Scanning System 2:1 Interlace Synchronization System Internal/Line Lock Scanning Frequency 50 Hz (VD) 59.
Specifications Model LV903P LV903N Exposure Electric Shutter LV902P LV902N LV901P LV901N 1/50 1/90,000 (Auto Mode) 1/60 1/90,000 (Auto Mode) ALC/ELC 1/50 1/90,000 (Auto Mode) 1/60 1/90,000 (Auto Mode) White Balance 1/50 1/90,000 (Auto Mode) 1/60 1/90,000 (Auto Mode) ATW / AWC->PUSH / MANUAL Back Light OFF/WDR/BLC/HSBLC OFF/WDR/BLC OFF/BLC/HSBLC WDR 60dB 60dB - MOTION DET. OFF/ON Power Consumption Max 3.
P/NO : MFL60560443
