OWNER'S MANUAL Color Video Camera Please read this manual carefully before operating your set and retain it for future reference.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
be ng) and no ses, should made by a nform to all do not qualified ance heeled a duct an c sed of cipal ted ted local our event uences human ation d your service FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
Important Safety Instructions Safet 1. 2. 3. 4. 5. Do not disasse Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
tus. cesanufac- tripod, d by the h appad, use cart/ o avoid ring unused lified ing is atus has y, such plug is n spilled o the has moisture, y, or has Safety Precautions Do not attempt to disassemble the camera Avoid the camera with direct sunlight Do not use strong solvents or detergents Handle the camera with care To prevent electric shock, do not remove screws or covers. There are no user serviceable parts inside. Ask a qualified service personnel for servicing.
Cons What's in the box Front V Video Cable Camera Body M4 Tapping Screws (2 EA) (Pan Lock Screw) Optional Adapter (DC 12 V, 300 mA) Side V
Construction Front View Pan Base 6-pin Dip Switch Tilt Base Zoom Lever Tilting Lock Screw Focus Lever Side View Lens Tilting Lock Screw Dome Cover Separatory Spring
Installation Insta Camera Installation Camer 1. Aim the LG logo of the Dome Camera to face the place that you wish to watch. 2. Tighten the M4 Tapping Screws to fix the Dome Camera on the ceiling, then adjust the Pan (Left /Right) by moving the Pan Base. Tighten the M4 Tapping Screws after adjustment. 3. Loosen the Tilting Lock Screw. Adjust the Tilt(Up /Down) by moving the Tilt Base then tighten Tilting Lock Screw. 4.
wish to Installation Camera Connection Connect the Power Adapter (12 V, 300 mA; optional) to the Power Input Jack of the camera as shown below.
Installation Setu NOTES: 6-pin D • hen you disassemble the Dome Cover, lift the Dome Cover W Separatory Spring on the opposite side of LG Logo and turn the Dome Cover clockwise simultaneously. This cam Switch fo Dome Cover Separatory Spring 10 • When you install the camera, handle with care. The camera could be damaged by improper handling or storage. • I f this camera is mounted on the other places except ceiling, you need an extra bracket for mounting.(not supplied) 1. ELC ELC (Auto The 2.
Setup er the 6-pin Dip Switch Setting This camera has the 6-pin Dip Switch for setting. 4. BLC Backlight compensation eliminates strong background light which makes the camera picture dark such as a spotlight. You can select the mode for adjusting the iris lens. The default setting is OFF. 5. L/L Line-Lock mode, Internal Mode. Line-Lock when using AC 24 V power. The default setting is INT. could , you 3. AWB/HOLD AWB (Auto White Balance), HOLD (White Balance Hold). The default setting is AWB. 1.
Dime Troubleshooting Check the following guide for the possible cause of a problem before contacting service. The picture is poor Does the Dome Cover have lots of dust on the surface? - Use a dry cloth to clean the camera when it is dirty. Smear may be caused to the screen of night than daytime. - Adjust the Focus by moving the Focus Lens. 12 Contrast of the screen is not clear. Check the condition of the monitor. A light source such as a spot light causes burn-in on the display screen.
Dimension not monitor. ot light ay ngle trong ø 100 91 mm 10 mm 31 mm ars ø 121.
Specifications Model Signal System Total / Effective Pixels Pick-Up Device Lens Iris Signal Process Scanning System Sync. System Scanning Frequency Resolution S/N Ratio Standard Illuminance Sensitivity (1/3 output) Video Output Signal Gain Control Exposure Shutter Speed White Balance Back Light Power Source Power Consumption Operating Temp. Storage Temp.
AB 8
