Owner's Manual

Installation

Camera Installation

1. Aim the LG logo of the Dome Camera to face the place that you wish to

watch.

2. Tighten the M4 Tapping Screws to fix the Dome Camera on the ceiling,

then adjust the Pan(Left/Right) by moving the Pan Base. Tighten the

M4 Tapping Screws after adjustment.

3. Loosen the Tilting Lock Screw. Adjust the Til

t(Up/Down) by moving the

Tilt Base then tighten Tilting Lock Screw.

Set the Zoom Lever to a point between "Tele" and "Wide" to choose the

desired angular field of view.

Set the Focus Lever to a point between "Near" and "Far" to choose the

desired focus of view.

5. Install the Dome Cover to the main body by turning it counterclockwise

to the end.

Notes

• When you install the camera, handle with care. The camera could be damaged

by improper handling or storage.

• If this camera is mounted on the other places except ceiling, you need an extra

bracket for mounting. (not supplied)

Installation

Camera Connection

Connect the Power Adapter (12 V, 300 mA; optional) to the Power

Input Jack of the camera as shown below.

Power Input

Jack

Adapter

Jack

Power Adapter

(Not supplied)

Monitor

BNC