Owner's Manual

31
Initial Configuration and Operation
Time mode
> SynchronizewithNTPServer:Setsthetimeofthesystem
accordingtotheSync.Intervalconfigurationofyour
system.InputtheIPaddressortheURLoftheNTPserver
andselecttheintervalofthesynchronizationwithit.
YoucanalsoclicktheNTPserveryousetbypressingthe
[Test]button.
> Synchronizewithpersonalcomputer:Synchronizewith
theclockofyourlocalsystemtoconfigurethetimeand
date.
> Synchronizemanually:Inputthetimeanddateofthe
systemmanually.
Note:
•
Rebootingthesystemaftersettingthetimemaycausethe
systemclocklag.Tomaintainprecisetime,werecommend
youselect[SynchoronizewithNTPserver]mode.
• Ifyouareusingtherecordingserverbothfortherecording
andasanNTPserver,refertotheNTPconfiguration
instructionsfortheOSoftherecordingserver.
Server time
> Servertime:DisplaysthecurrentdateandtimeoftheIP
device.
• Save:Click[Save]buttontosavethechangesyoumadein
thismenu.
Maintenance