Owner's Manual

33
Initial Configuration and Operation
Firmware
> Howtoupgradeyourfirmware
1. Press[Browse]button.
2. Selectthetargetfirmwarefile.
3. Press[Upgrade]buttontoinitiatethefirmware
upgradeprocess.
Note:
Firmwareupgradingcantakeawhile.Whenfirmware
upgradingisinprogress,NEVERshutdownyourbrowser,
sinceitcancausesystemmalfunctions.Oncethe
firmwareupgradeiscomplete,aconfirmationwindow
willpop-up.Youneedtowaituntilitdoestomakesure
theprocessiscomplete.
> Initialize:Press[Initialize]buttontoreturnyourdeviceto
itsfactorysetting.But,thenetworksettings,PTZprotocol
configurationandthepresetsarenotinitialized.Use
cautionwhenyoupressthisfunctionality.
Storage