Owner's Manual

43
Initial Configuration and Operation
Master / Slave
> RTPUnicast:Checkthisradiobuttonwhenyouareusing
RTPunicast.
> RTPMulticast:Checkthisradiobuttonwhenyouare
usingRTPmulticast.
- VideoRTPport:SetthenumberofVideoRTPport.
Therangeofthepossibleportnumberisfrom
1,025to65,534.
- AudioRTPport:SetthenumberofAudioRTPport.
Therangeofthepossibleportnumberisfrom
1,025to65,534.
- DataRTPport:SetthenumberofDataRTPport.
Therangeofthepossibleportnumberisfrom
1,025to65,534.
- IPAddress:SettheIPaddressforRTPmulticast.The
rangeofthepossibleaddressisfrom240.0.0to
239.255.255.255.
Note:
Whenusingmulticast,avoidusingthesameportnumberwith
themulticasttopreventthevideostreamfromoverwrapping.
Also,useuniqueIPaddressesandportnumberforeach
device,ortheremightbeIPaddresscollisionbetweenthe
devices.
TTL
> TTL:SettheTTL(TimeToLive)value.Thedefaultsettingis
7,andthepossiblerangeofthevalueisfrom1to225.
• Save:Pressthisbuttontosaveanychangesyoumade.