Owner's Manual

46
Initial Configuration and Operation
IP list
> BasicPolicy:Choosethebasicpolicyforgrantingaccess.
- Allowall:Basicallytheaccesswillbegrantedtoall
IPaddresses,exceptforthoseintheIPblocklistby
theuser.
- Denyall:Basicallytheaccesswillnotbegrantedto
anyIPaddressexceptforthoselistedintheAccess
PermissionList.Toactivethismode,thereshouldbe
atleastoneormoreaddressregisteredinthelist.
• Save:Clickheretosavethechangeyoumadeforthe
setting.
•
Add:AddanIPaddresstothelist.
1. Press[Add]button.
2. Inputthefollowingitemsonthelist.
- Alias:Inputthenamehere.
- From:Insertthebeginningaddressfromwhich
theaccesscontrolpolicyapplies.
- To:Inserttheaddressattheendofthe
applicationrangeoftheaccesscontrolpolicy.
Note:
Toapplyyouraccessgrantingpolicy(eitherblockingor
openingforthem)toarangeofaddresses,insertthe
startingaddressoftherangeastheBeginningAddress
andthelastoneastheEndAddress.Ifyouwishtoadd
onlyoneaddress,inputthesameaddressbothforthe
BeginningandEndaddresses.
3. Click[Save]button.
4. Repeatstep1tostep3toaddmoreIPaddresses.
• Remove:Deletesoneormoreaddressesfromthelist.
1. Selecttheaddressyouwishtodeletefromthelist.
2. Click[Remove]buttontoeliminateit(orthem)from
thelist.