Owner's Manual

47
Initial Configuration and Operation
Wireless
Access Point
> Press[Refresh]buttontorefreshthelistofthewireless
LANaccesspointsdetectedaround.Thefiguresonthe
leftshowthestrengthofthesignal,whilethenamesof
theaccesspointsaredisplayedontheright.
> Click[Info]todisplaythedetailedinformationforeach
selectedaccesspoint.Press[Add]buttontoaddthe
accesspointstoconnectto.
> Theaddedaccesspointsaredisplayedontherightpanel
ofthescreen.Choosetheaddedaccesspointandpress
[Connect]buttontoestablishaconnection.Duringthe
connectionattempt,‘Connecting’willbedisplayedon
therightside(incaseanIPaddressisbeingassigned,
‘IPassigning.’)Whentheconnectionisestablished,a
messagesaying‘connected,’andwhenaconnection
toaWPSismade,‘wpsconnected’willbedisplayed,
respectively.
> Press[Disconnect]todisconnect.