Owner's Manual

48
Initial Configuration and Operation
Note:
Whenaconnectiontoacertainaccesspointismade,youmay
notusethe‘Edit,’‘Delete,’and‘Connect’buttons.Tousethese
functionalities,disconnectfromtheAPfirst.
> Youmayuseanaccesspointyouwouldliketouseby
pressing[Add]buttontoaddanewaccesspoint.
> Tochangetheinformationontheaddedaccesspoint,
press[Edit]tochange.
> Todeleteanaddedaccesspoint,selectthetargetaccess
pointandpress[Remove].
Note:
•
DuetothenatureofaWi-Finetwork,signalinterruption
maybefearedat2.4GHZwhenthedeviceisconnected
throughawirelessLANnetwork.
• Dependingonthenumberofthewirelessdevicesthatare
sharingthehubtowhichthecameraisconnectedorthe
hubsusingthesameoradjacentchannels,thenetwork
speedmightbecomeslower.
• Astherearepossibilitiesofthevideofeedbeing
interruptedduetothenetworkproblemwhenusedunder
awirelessnetworkenvironment,itisrecommendedthat
thestreamsettingsoftheaudioandvideoaresetto
defaultsettings.
IP Address status
> AutomaticallysetwithDHCP:Clickonthisradiobutton
touseDHCPtoautomaticallyconfigurethenetwork
settingsofthedevicethroughaDHCPserver.
> Staticallyset:Manuallysetthenetworkconfigurations.
- IPAddress:InputtheIPaddress
- SubnetMask:Inputthesubnetmaskaddress.
- Gateway:Inputthegatewayaddress.
- PrimaryDNSServer:InputtheaddressoftheMain
DNSServer.
- SecondaryDNSServer:Inputtheaddressofthe
secondaryDNSserver.
• Save:Pressthisbuttontosavethechangesyoumade.