Owner's Manual

56
Initial Configuration and Operation
General
> Sensitivity:Setthesensitivityofthemotiondetectorto
detectanymovingobjectsinthescene.Highhigher
sensitivity,eventinytwitchesinthescenecanbe
detectedasamovingobject.
> Save:Clickthisbuttontosavethechangesyoumade.
Setting the motion detector frame
1. Click[Add]buttontoanyamotiondetectorframeon
screen.Asyouclickthebutton,newlyaddedmotion
detectorframewillappearonthepreviewscreen,and
youmayadduptofiveframesperscene.
2. SetthesensitivityvaluefortheframeatSensitivitymenu.
3. Clickonthemotiondetectorframeatitsrimorsidesand
dragtoadesiredposition.
4. Click[Save]tosavethechanges.
Notes:
•
Thesizeofthemotiondetectorframecanbeadjusted.
Clickontheedgeoftheframeanddragtoadjustthesize
asnecessary.
• Toactivatethemotiondetectionfunctionality,eitherofthe
MasterorSlavesettingshouldbeactivatedbyactivating
the[Enable]Item.Alsothevideocodecshouldbesetat
H.264andthevalueofGOPshouldbe2orhighertoallow
themotiondetectionmodetofunction.
Trigger Event
Whenthereisanevent(amotiondetectedbythemotion
detector)thevideofeediseitherrecordedortherelayand
FlashLED,alarmingdevicewillbeactivated.