MK_LX-220.221(ENG)-A027E MICRO HI-FI SYSTEM OWNER'S MANUAL MODELS: LX-220A/D/X, LXS-220 LX-221A/D/X, LXS-221 Please read this manual carefully before operating your set. Retain it for future reference. Designs and specifications are subject improvement.
Precautions CAUTION CAUTION Use of controls procedures RISK OF ELECTRIC or adjustments or performance of specified herein may other than those result in hazardous radiation exposure. SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE Laser component in this product is capable of emitting radiation exceeding the limit for Class 1. COVER(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Table of Contents INTRODUCTION OPERATION Precautions...........................2 Presettingtheradiostations. TableofContents......................3 Listeningtotheradio..................11 BeforeUse...........................4 TapePlayback........................12 BasicPlayback......................12 ToStopPlay........................12 TapeCounterReset..................12 .12 ToPlayRewindorFastForward. SafetyPrecautions....................4 NotesonDiscs......................4 NotesonRemoteControl.
Before Use Precautions Safety Handling When Notes the unit shipping on Remote Control remote remote such liquids, the unit. Do not leave rubber near contact with the unit for They will leave marks Cleaning plastic products or long period a on insecticide spray, as and press in (7 m) from the front of the sensor. About 30° in each direction of the front of the Angle: volatile About 23 ft Distance: keep the surface clean use sensor the buttons.
Front Panel/Rear Panel 22 1 21 19 23 ANTENNA 18 OPTIONAL AM 17 45 INTRODUC 23 20 FM GND 16 67 89 A 24 U 15 R X 14 L 13 10 11 12 25 LR 27 26 1. DISPLAY 2. POWER 3. FUNCTION SELECT button 4. ? RDS button ? CD PAUSE ? COUNTER RESET 12. ( STANDBY/ON) button (TUNER/BAND, CD, TAPE, AUX) : ) button (COUNT.RESET) button: OPTIONAL 5. PROG./MEMO button 6. ? PLAY MODE button ? COUNTER RESET CD SYNC. button 8. REPEAT button : OPTIONAL (COUNT.RESET) 9.
Remote Control 1 78 X 9 245 3 1. POWER button 2. TUNER/BAND button 3. AUX button 4. EQ PATT. button 5. PRESET 6. CD FUNCTION buttons 10 11 6 12 ( ? PLAY/PAUSE ( ? CD button ? CD SKIP/SEARCH ? REPEAT button STOP( 7. XDSS button 8. SLEEP button 9. MUTE button 10. VOLUME 11. buttons ) ) ( ) button ( ) / button button ) PROGRAM button 12.
Connections Speaker System Connect the Connection speakers using the supplied speaker cords by matching the colors of the terminals and those possible surround sound, adjust the speaker parameters (distance, level, etc.). of the cords. To obtain the best AU X R LR red INTRODUC L black Left Right speaker speaker otes ? Be sure to match the If the cords are speaker cord to the appropriate terminal on the components: reversed, the sound will be distorted and will lack base.
the Setting Voltage (OPTIONAL) If your set is equipped with a voltage selector at the back side, be the AC power cord. sure to set it to your local power supplied before connecting the CLOCK Setting 1 Press CLOCK. (If the clock requires setting, press CLOCK for more than 2 seconds.) The hours begin to flash. and hold - 2 Select 24 hour a pressing cycle (12HR) 3 12 hour cycle by (24HR) or Press SET to confirm the selected hour Sleep When the 1 or PRESET buttons.
Timer Function The unit can set the clock function in power on/off state. With the TIMER function you can have the radio reception and and recording turned on and off at the time desired. 1 Press CLOCK to check the current time. 8 For your reference If you don't set clock, timer function doesn't work. 2 Press TIMER to enter the timer TUNER-CD-TAPE flashes in the previous memorized TIMER setting, press and hold the TIMER button seconds.
Audio Volume ? Adjustment XDSS (Extreme Adjustment Tu r n VOLUME CONTROL KNOB clockwise to increase the sound level, or Dynamic Sound System) Press XDSS to reinforce treble, bass and surround effect. counterclockwise to decrease it. The "XDSS ON" or "XDSS OFF" indicator To cancel it press XDSS ? Press VOLUME ( ) press the VOLUME control. Sound ? ) to decrease it on level, the remote a button on desired sound mode by using RDS the EQ PATT.
Presetting You can the radio stations preset 30 stations for FM and AM. Before 1 2 make sure Press TUNER/BAND to select the (AM or FM) you want. Every time you press this button, changes alternately. Press TUNING buttons the frequency on Press PROG./MEMO 5 that you have turned down the volume to the minimum. tuning, remote - frequency PROGRAM the on The station is stored. 2 to 5 to store other stations. Repeat steps 6 AM and FM (or control) again.
Tape Playback You Basic 1 2 only can use normal tape. To Playback After ("NO or / or stop. tape function. TAPE" appears in the display window.) Open cassette deck TAPE DOOR 3 Insert 4 Press PLAY a by pushing PUSH ( OPEN) position. cassette with the tape panel or or PLAY ( : or one OPTIONAL) on the front : OPTIONAL) on the can pressing plays only plays front or reverse (backward play) side, stops automatically.
CD Playback Basic Playback Press CD to select CD function. 1 If no disc is loaded then "NO DISC" is Press CD OPEN/CLOSE 2 ( ) and displayed. place To Program Play You can the disc Note 8cm(3 inch) an disc, put it onto the inner circle of the tray. Press CD OPEN/CLOSE 3 ( ) to close the disc 1 2 3 compartment. Press PLAY 4 remote To Pause ( ) (or control). PLAY/PAUSE ( ) on the 4 5 (CD ) or PLAY/ PAUSE ( during playback.
Troubleshooting Check the following guide for the cause of a ? ? The power cord is disconnected. The audio cables connected ? ? not are ? securely. speaker cable wrong position. the power cord into the wall Plug source ? Switch start playback. the external on is set to the ? Set the speaker cable to the position, then turn on the again by pressing POWER. correct No disc is inserted. Insert a disc. An ? Insert a playable ? ? The disc is disc is inserted.
Specifications MODEL SECTION [Genral] Power supply Power consumption External dimensions Dynamic [Tuner] (MW) [TAPE] (WxHxD) of the unit. 180 X 248 X 247mm 40 ratio 18000 Hz - 70 dB 70 dB range 108.0 MHz Tuning Range 87.5 Intermediate 10.7 MHz Frequency to Noise Ratio Signal - or 65 - 74 MHz, Tuning Range 522-1611kHzor530-1610kHz Intermediate 450 kHz Frequency to Noise Ratio - 100 Power 20W 1800 Hz - + T.H.D 0.
P/NO :3828R-A027E
