STUHLING_LX-M140(Eng)_42G Micro Hi-Fi System OWNER'S MANUAL MODELS: LX-M140A/X/D LXS-M140 Please read this manual carefully before operating your set. Retain it for future reference. Designs without and specifications are subject notice for improvement.
Precautions CAUTION CAUTION Use of controls or adjustments or performance of prospecified herein may result cedures other than those RISK OF ELECTRIC in hazardous radiation exposure. SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. lightning an equilateral triangle within user NAR FARLIG.
Table of Contents INTRODUCTION OPERATION Precautions............................2 Presettingtheradiostations. TableofContents.......................3 Listeningtotheradio...................11 BeforeUse.............................4 TapePlayback.........................12 SafetyPrecautions.....................4 NotesonDiscs........................4 NotesonRemoteControl...............4 NotesonTapes.......................4 4 Adjusting the voltage (OPTIONAL). . . . . . . . . . . . . . . .
Before Use The spray intended for the unit Handling When Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static Precautions Safety shipping the Notes unit original shipping carton and packing materials in handy. For maximum protection, re-pack the as it was originally packed at the factory. on analog Remote Control Remote Control come unit records.
Front Panel/Rear Panel 1 15 20 14 2 13 INTRODUC OPTIONAL 3 12 4 5 6 11 7 10 19 L 16 18 8 R 17 9 1. CD DOOR 2. DISPLAY 3. POWER indicator 4. POWER 5. Remote Control Sensor 6. ? ? ? ? 10. ? ? (STANDBY/ON) button CD PLAY/PAUSE (CD TUNING ) buttons ( ( / 8.
Remote Control 1. 11 POWER button 2. PRESET 3. CD FUNCTION buttons ? 10 1 ? ? 9 2 4. 3 7 ) button STOP( / ) buttons REPEAT button EQUALIZER PATTERN (EQ PATT.) button XDSS button 5. NUMBER buttons 6. MP3 file information 7. PROGRAM button 8. SLEEP button 9. VOLUME CONTROL display (Mp3 Info) button ( / ) button 10. MUTE button 4 11.
Connections Speaker System Connect the Connection speaker cords to the speaker terminals. INTRODUC L R otes ? Be sure to match the If the cords ? are If you use front the speakers. ?Do speaker cord to the appropriate terminal on the components: reversed, the sound will be distorted and will lack base. speakers with low maximum not disassemble the front cover of + input rating, adjust the volume carefully to + and -- to --. to avoid excessive output on supplied speaker.
Setting 1 the CLOCK Press CLOCK. Use TUNING 4 (If the clock requires setting, press and hold CLOCK for more than 2 seconds.) The hours begin to flash. () buttons to panel. set the correct hours on the front - 2 Select 12 hour cycle or 24 hour cycle by pressing TUNING () on the front panel. a (12HR) 3 Press SET. 5 Use TUNING correct minutes on the front 7 the 8 Press CLOCK at any time to for about 3 seconds.
Timer Function With the TIMER function you can have the radio reception and and recording turned on and off at the time desired. Press CLOCK to check the current time. 1 Press TIMER to enter the timer setting window in turn. display previous memorized press and hold the TIMER button seconds. setting, The - previous memorized timer on time and display. source play () buttons by pressing the front panel. on Adjust the volume level by pressing () buttons on the front panel. TUNING Press SET.
RDS Function OPTIONAL - About RDS Programme Search (PTY) This unit is with RDS Data equipped (Radio System), brings a wide range of information from FM radio. RDS is a system for transmitting station call signs or network information, a description of station programme type text message about the station or specifics of musiwhich Amajor benefit of RDS is its ability to encode broadcasts with Programme Type (PTY) codes that indicate the type of material being broadcast.
Presetting You can the radio stations preset 50 stations for FM and AM. Before 1 make sure Press TUNER/BAND to select the FM or () on the front panel frequency indication starts to change, then release. Scanning () (or PRESET ( / ) control) to select the preset Press PROGRAM/MEMORY. 5 - The station is stored. 3 to 6 to store other stations. Repeat steps 6 Press TUNING stops when the unit tunes in the remote number you want. you want in the display window.
Tape Playback Basic 1 2 To Pause Playback Press FUNCTION repeatedly cassette deck ( / To by pushing STOP/EJECT on a cassette with the tape side to the bottom and then close deck. Insert 4 Press PLAY To Stop Play ( Press STOP/EJECT Play After ) button. 3 ) during playback. again it to resume play. Fast Rewind or Fast Forward / pressing REWIND/FAST FORWARD ( panel during playback or stopping. ) the front AUTO STOP DECK After auto stop deck ).
CD Playback Basic 1 To Playback Press FUNCTION repeatedly To to appear CD no disc is loaded then "NO DISC" is displayed. - OPEN/ ( and CLOSE) place the disc into the disc tray. an 8cm(3 inch) disc, put it onto the inner circle of the tray. Press CD OPEN/CLOSE 3 OPEN/ ( CLOSE) close the disc compartment. Audio CD: "READING" appears in the time Press the MP3 Info button win- 4 The information (Title, Artist or Album) of the MP3 file display window.
CD Playback To Program Play You can About MP3 arrange the order of the tracks on the discs and An MP3 file is audio data compressed by using the layer-3 file-coding scheme. We call files that have the ".mp3" file extension "MP3 files". The unit can not read an MP3 file that has not ".mp3" ? create your own program. The program can contain up to 20 tracks. MPEG1 audio ? Press PROGRAM/MEMORY 1 the remote control) (or PROGRAM file extension. on the stop mode.
Troubleshooting Check the following guide for the possible ? No sound. ? ? playback. a problem before contacting service. ? ? ? Correction The power cord is disconnected. The audio cables connected The unit does not start of Cause Symptom No power. cause are not An or ? securely. source equip- unplayable disc or placed ? ? tape is inserted. placed upside ?T he disc is not Plug securely.
Specifications Power [Genral] Power supply Refer to the back consumption 20W Mass (WxHxD) Signal-to-noise Dynamic range Tuning Range ratio 60 dB 87.5 AM (MW) [Amp] Frequency Signal to Noise Ratio Frequency Response Tuning Range Intermediate Frequency 100 - 1800 Hz 5W+5W ratio 20000 Hz - 60 dB Tape Speed 4.75cm/sec Wow Flutter 0.25% F.
