ALMATY_LX-M230/M330X(ENG)-A081T MICRO HI-FI SYSTEM OWNER'S MANUAL MODELS: LX-M230 (LX-M230A/D/X, LXS-M230) LX-M330 (LX-M330A/D/X, LXS-M330) Please read this manual carefully before operating your set. Retain it for future reference. Designs without and specifications are subject notice for improvement.
Precautions CAUTION CAUTION Use of controls procedures RISK OF ELECTRIC adjustments or performance of than those specified herein may or other result in hazardous radiation exposure. SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE Laser component in this product is capable of emitting radiation exceeding the limit for Class 1. COVER(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Table of Contents INTRODUCTION OPERATION Precautions...........................2 Presettingtheradiostations. TableofContents......................3 Listeningtotheradio..................11 BeforeUse...........................4 TapePlayback........................12 BasicPlayback......................12 ToStopPlay........................12 TapeCounterReset..................12 .12 ToPlayRewindorFastForward. SafetyPrecautions....................4 NotesonDiscs......................4 NotesonRemoteControl.
Before Use Precautions Safety Handling When Notes the unit on Remote Control remote such liquids, remote as the unit. Do not leave rubber near contact with the unit for They will leave marks Cleaning plastic products long period a on insecticide spray, or and press in (7 m) from the front of the sensor. About 30° in each direction of the front of the keep the surface clean volatile About 23 ft Distance: Angle: use sensor the buttons.
Front Panel/Rear Panel 13 1 INTRODUC 12 23 14 11 10 OPTIONAL ANTENNA AM 4 GND 9 5 FM 6 AUX 7 15 8 16 18 17 1. CD DOOR 2. DISPLAY 3. POWER 4. ? XDSS button ? SURROUND button ? RDS button ? SET ? CD PAUSE ? COUNTER RESET button 5. ( STANDBY/ON) : button position -DECK 9. VOLUME CONTROL KNOB 10. FUNCTION SELECT button (TUNER/BAND, MP3/CD, TAPE, AUX) 11. OPTIONAL button (CLOCK/ TIMER) (CD button ) ? CD SYNC. button ? PROG.
Remote Control 1. XDSS button 2. POWER button 3. TUNER/ BAND button 4. AUX button 14 5. PRESET 13 6. CD FUNCTION buttons 15 1 X 23 12 45 11 6 10 button ) ? PLAY/PAUSE ( ? CD button ? CD SKIP/SEARCH ? REPEAT button STOP( ) button ) / ( 7. MP3 file information 8. NUMBER buttons 9.
Connections Speaker System Connection Connect the cords. To speakers using the supplied speaker cords by matching the colors of the terminals and those obtain the best possible surround sound, adjust the speaker parameters (distance, level, etc.). of the INTRODUC AUX red black red Right speaker Left speaker otes ? ? ? Be the components: + to + and to --. If the cords are reversed, the sound will be distorted and will lack base.
Audio Adjustment the Setting voltage (OPTIONAL) If your set is equipped with a voltage selector at the back side, be sure to set it to your local power supplied before connecting the AC power cord. the CLOCK Setting (If the clock CLOCK for The hours - 2 When the timer is used, the power is automatically turned off after the specified time has elapsed. 1 Press CLOCK. 1 Select requires setting, press more than 2 seconds.) begin to flash. 24 hour cycle or pressing PRESET (-)/(+).
Audio Adjustment Timer Function The unit can set the clock function in power on/off state. With the TIMER function you can have the radio reception and recording, CD play, tape play or auxiliary and play source recording turned on and off at the time desired. Press CLOCK to check the current time. 1 6 Press SET to confirm the hour to switch 7 Set the minute to switch PRESET 2 TUNER-CD-TAPE flashes in the setting mode. display window in turn.
RDS Function - OPTIONAL About RDS Programme Search (PTY) This unit is A which equipped with RDS (Radio Data System), brings a wide range of information to FM radio. Now in use in many countries, RDS is a system for station call signs or network information, transmitting description of ability to encode broadcasts with Programme Type (PTY) codes that indicate the type of material being broadcast.
Presetting You the radio stations preset 30 stations for FM and AM. Before can make 5 that you have turned down the volume to the minimum. tuning, sure Press TUNER/BAND to select the 1 (AM or FM) you want. Every time you press this button, changes alternately. Press TUNING 2 the frequency (-)/(+) on AM and FM in the front panel until to change. indication starts automatically TUNING(-)/(+) for more than 0.5 seconds. Scanning stops when the unit tunes in a station.
Tape Playback You can use Basic 1 only normal tape. To Playback After Press TAPE to select tape function. ("NO TAPE" appears in the display window.) 2 3 cassette deck or PUSH EJECT by pushing position. 4 To Stop Play or : / pressing After auto stop deck plays only STOP( Tape select direction of the cassette you want pressing PLAY MODE. OPTIONAL). can Function playback. Playing time plays front or reverse (backward play) side, stops automatically. ) during playback.
CD Playback Basic Playback If disc is loaded then "NO DISC" is no Press CD OPEN/CLOSE 2 ( ) and displayed. place Program Play You can arrange the order of the tracks create your own program. The program Press MP3/CD to select CD function. 1 To it onto the inner circle of the tray. Press CD OPEN/CLOSE 3 ( ) to close the disc compartment.
Troubleshooting Check the for the following guide possible of cause a problem before Cause Symptom contacting service. Correction No power. ? The power cord is disconnected. ? the power cord into the wall outlet securely. No sound. ? The audio cables ? Connect the audio cable into the connected ? The unit does not start playback. not are securely. jacks securely. The power of the external equipment is switched off.
Specifications MODEL SECTION [Genral] Power supply Power consumption Refer to the back Mass External dimensions Frequency [CD] Dynamic [Tuner] (MW) (WxHxD) 4.46kg 4.60kg 18000 Hz 70 dB 70 dB 70 dB 70 dB 108.0 MHz Tuning Range Intermediate 10.7 MHz - to Noise Ratio or 65 - 74 MHz, 60/55 dB 10000 Hz Tuning Range 522-1611kHzor530-1610kHz Intermediate 450 kHz Signal Frequency to Noise Ratio - 35 dB 100 1800 Hz - Power 20W T.H.D + 20W 30W 0.
P/NO : 3828R-A081T
