LGERO_LX-U561/U261_ENG_125D MICRO HI-FI SYSTEM OWNER’S MANUAL MODEL: LX-U561 (LX-U561A/D/X, LXS-U561) LX-U261 (LX-U261A/D/X, LXS-U261) Please read this manual carefully before operating your set. Retain it for future reference. Designs and specifications are subject to change without notice for improvement.
Safety Precaution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Before use Contents Before use . . . . . . . . . . . . . . . . . . . . . . . . .3-5 Front/Rear panel . . . . . . . . . . . . . . . . . . . .4 Remote control . . . . . . . . . . . . . . . . . . . . . .5 Connections . . . . . . . . . . . . . . . . . . . . . . . . .6 Speaker System Connection / Antenna (Aerial) Connections / Auxiliary Function . . .6 Operation . . . . . . . . . . . . . . . . . . . . . . . .7-14 Setting the Clock / TIMER Function . . . . . .7 Sleep Function / Audio Adjustment . . . . . . .
Before use Front/Rear panel 1 15 14 2 3 4 13 5 6 12 11 10 7 20 16 AUXIN 9 8 L 17 18 1. 2. 3. 4. 5. CD DOOR 6. • PRESET (-/+) buttons (TUNER) 10. • (zREC / RECORD) REC/ PAUSE button POWER (1STANDBY/ON) button • CD SYNC. button Remote Control Sensor • SET/ CD([]) CD PAUSE button EQUALIZER PATTERN (EQ) button • • • • • • • XDSS button • SURROUND button • REVERSE PLAY (b) button (TAPE) : OPTIONAL • PLAY (B) button (TAPE, CD) • STOP (x) button (TAPE, CD) 7. 4 11. USB Port 12.
Before use Remote control Before use USB button DIMMER button DIMMER POWER button MUTE button USB PRESET ( / ) buttons VOLUME CONTROL ( FUNCTION / ) buttons FUNCTION button CD FUNCTION buttons • PLAY/PAUSE (B/[]) button • CD STOP(x) button • CD SKIP/SEARCH BB >) buttons (. bb/B • TUN.(-/+) buttons • REPEAT button SLEEP button TUN.- TUN.+ PROGRAM/MEMO button D.SKIP button • EQUALIZER PATTERN (EQ PATT.) button • XDSS button • SURROUND (SURR.
Connections Speaker System Connection Auxiliary Function Connect the speaker cords to the speaker terminals. 1. Connect an auxiliary device i.e. TV or VCR, via the rear mounted AUX phone sockets. 2. Press AUX. otes • You can also record from the auxiliary input source, see Recording Section. • Turn the unit off and then connect an auxiliary device before you connect an auxiliary device. Because it may be made a noise.
Operation 4.1.a. When you select the TUNER function, 1. Press CLOCK. (If the clock requires setting, press and hold CLOCK for more than 2 seconds.) - The hours begin to flash. 2. Select a 12 hour cycle or 24 hour cycle by pressing PRESET (-/+) on the front panel. “PLAY” and “REC” indicator flash in the display window alternately for about 3 seconds. “PLAY” indicator : TUNER play only “REC” indicator : TUNER play and recording b. Press SET/CD([]) when the desired function is flashing. c.
Operation Sleep Function When the sleep timer is used, the power is automatically turned off after the specified time has elapsed. 1. 2. To specify the time delay before the power is turned off, press SLEEP. In the display window you see for about 5 seconds. This means that the system turns off automatically after 90 minutes. Press SLEEP until the desired time is displayed. To check the remaining time until the power is turned off, press SLEEP while the sleep function is active.
Operation RDS Function - OPTIONAL This unit is equipped with RDS (Radio Data System), which brings a wide range of information to FM radio. Now in use in many countries, RDS is a system for transmitting station call signs or network information, a description of station programme type text message about the station or specifics of musical selection and the correct time.
Operation Presetting the Radio Stations Listening to the Radio You can preset 50 stations for FM and AM. Before tuning, make sure that you have turned down the volume to the minimum. 1. Press TUNER/BAND to select the FM or AM you want in the display window. The last received station is tuned in. 2. Press PRESET (-/+) (or PRESET ( / ) on the remote control) repeatedly to select the preset station you want. - Each time you press the button, the unit tunes in one preset station at a time. 3.
Operation Tape Recording Use only normal tapes. Wind the tape to the point recording starts. Use only normal tapes. Operation Tape Playback Basic Playback Press TAPE (or FUNCTION) to select tape function. (“NO TAPE” appears in the display window.) Basic Setting 1. Select a function you want to record except tape function. 2. Open the cassette door by pushing Z PUSH EJECT position. 2. Open the cassette deck and insert a blank cassette into the cassette compartment. 3.
Operation CD Playback Basic Playback 1. Press CD (or FUNCTION) button to select CD function. If no disc is loaded then “NO DISC” is displayed. 2. Press Z OPEN/ CLOSE and place the disc into the disc tray. ote To load an 8cm (3 inch) disc, put it onto the inner circle of the tray. 3. Press Z OPEN/ CLOSE to close the disc compartment. Audio CD: “READING” appears in the display window, and then the total number of tracks and the playing time are displayed.
Operation About MP3/WMA You can arrange the order of the tracks on the discs and create your own program. The program can contain up to 20 tracks. MP3 1. Press PROGRAM/MEMO on the remote control (or PROGRAM/MEMORY on the front panel) on the stop mode. 2. Press . bb/BB > to select the track. EX) “4 - P01” will be shown in the display. Program number Track number • An MP3 file is audio data compressed by using the MPEG1 audio layer-3 file-coding scheme. We call files that have the “.
Operation USB Function Basic Playback 1. Plug the USB device into the USB connector of your unit. 2. Press the USB button to enter the USB mode. “CHECKING” appears in the display window, and then the total number of files is displayed. 3. Press PLAY (B) on the front panel or PLAY/ PAUSE (B/[]) on the remote control. In addition, you can also play using the NUMBER buttons. To Remove the USB from the unit. 1. Choose the other functions except USB function in order to remove the USB. 2.
Reference Troubleshooting Cause Correction No power. • The power cord is disconnected. • Plug the power cord into the wall outlet securely. No sound. • The audio cables are not connected securely. • Connect the audio cable into the jacks securely. • The power of the external source equipment is switched off. • Switch on the external source equipment. • No disc or tape is inserted. • Insert a disc or tape. • An unplayable disc or tape is inserted. • Insert a playable disc or tape.
Reference Specifications MODEL LX-U561A/D/X LX-U261A/D/X [General] SECTION Power supply Refer to the back panel of the unit. Power consumption Refer to the back panel of the unit. AM (MW) [Tuner] FM [CD] Net Weight 5.8kg External dimensions (WxHxD) 180 X 250 X 248mm Frequency response 40 - 18000 Hz Signal-to-noise ratio 55 dB Dynamic range 50 dB Tuning Range 87.5 - 108.0 MHz or 65 - 74 MHz, 87.5 - 108.0 MHz Intermediate Frequency 10.
