Owner's Manual

12
CD Playback
Basic Playback
1. Press CD (or FUNCTION) button to select CD
function.
If no disc is loaded then “NO DISC” is
displayed.
2. Press Z OPEN/ CLOSE and place the disc
into the disc tray.
ote
To load an 8cm (3 inch) disc, put it onto the inner
circle of the tray.
3. Press Z OPEN/ CLOSE to close the disc com-
partment.
Audio CD: “READING” appears in the display
window, and then the total number
of tracks and the playing time are
displayed.
MP3 CD: “READING” appears in the display
window, and then the total number of
files is displayed.
4. Press PLAY (
BB
) on the front panel or PLAY/
PAUSE (
BB
/
[]
)
on the remote control
.
In addition, you can also play an Audio CD or
MP3 CD using the NUMBER buttons.
Pause Playback
Press CD PAUSE (CD
[]
) or PLAY/ PAUSE (
BB
/
[]
)on
the remote control during playback.
Press this button again it to resume play.
Stop Playback
Press STOP(x) on the front panel or CD STOP(x)
on the remote control during playback.
Skipping a Track
• Press the (. bb/BB >) buttons on the
remote control (or
SKIP/SEARCH ( m/M ) but-
tons of
the front panel) to go to the next track.
• When the (. bb/BB >) buttons are
pressed once midway through a track, the player
returns to the start of that track. When it is
pressed again, a track is skipped each time the
button is pressed.
Searching a Track
After pressing and holding (. bb/BB >)
buttons on the remote control (or
SKIP/SEARCH
(
m/M ) buttons of the front panel) during play-
back, then release at the point you want.
ote
This function is not available to play a MP3/WMA
file.
Repeat
To play one track repeatedly
Press REPEAT on the remote control once during
playback.
- “ 1” appears in the display.
To play all tracks repeatedly
Press REPEAT again during playback.
- “ ALL” appears in the display.
To cancel repeat play
Press REPEAT once more during playback.
- Repeat indicator disappears.
To check MP3 file information
Press the MP3 Info button during MP3 file play-
back.
- The information (Title, Artist or Album) of the
MP3 file will be shown in the display window.
- If there is no the information of the MP3 file, “NO
ID3 TAG” indicator will be shown in the display
window.
- The “MP3 File name” and “ID3 TAG” should be
named using English.
ote
This unit can play a CD-R or CD-RW that contains
audio titles or MP3 files.
Operation