Table of Contents Installation and Connection Precautions Safety A1 Accessories Before A4 to the PC connecting A5 A6 Name and Function of the Parts Connecting to External Devices A14 to your PC A14 When Connecting When Watching VCR A17 When Watching DVD A18 When Watching DVI-D(HDCP) from the DVD/Set-top BOX When Watching A19 A20 TV A21 To arrange the cables Input Selection and Tracking Selecting and OSD (On How to Screen adjust Display) the OSD A22 the Screen N
Precautions Safety safety precautions carefully before using Please read these Warning If you ignore the warning message, you may be accident or death. Caution If you seriously injured or the product. there is a possibility of ignore the caution message, you may be slightly injured or the product may be damaged Precautions in installing the Product Warning Keep away from - Electrical heat like electrical heaters.
ENGLISH Electrical Power Related Precautions Warning Make - to connect the power cable to the You may be electrocuted or injured. current. grounded sure Use the rated - The voltage only. product can be damaged, During - a thunder or or you may be electrocuted. lightning storm, unplug You may be electrocuted or a fire can Do not connect several extension Use - the power cable cords, power bar with a grounding terminal A fire can break out due to overheating.
Precautions Safety Caution Do not shock the - You may Do not product when moving it. be electrocuted or the product can dispose the product-packing be damaged box. Use it when you move. Make the - panel face forward and hold it with both hands to move. If you drop the product, the damaged product can cause electric shock or fire. repair.
Accessories Please check the accessories in the * The product and the accessories Remote Control product package. can be different from the figures User's Guide/ Power Cord /Batteries D-Sub shown here. Driver CD/Cards Signal Polishing DVI-D Cable Cloth Signal Back Inserting Cable Audio Cable Cap RCA-PC Audio Cable batteries into remote control. 1. Take out the battery cap. 2. Insert the batteries with correct 3. Close the ? You and 30 polarity (+/-). battery cap.
Before Before Connecting to the PC setting up the product, ensure that the power to the product, the computer system, and other attached devices is turned off. Unfolding the stand Place the product with base its front facing downward on a Hold down the release button inside the stand and soft cloth. strongly pull out the stand with your two hands. The stand won't move if you don't press release button.
Name and Function of the Parts Name of the Remote Control Buttons MUTE Use the this button so that no sound comes out temporarily. POWER Able to power On/Off. SOURCE TV/AV I/II INPUT If you press the button once, the following Input Signal TV AV Window will appear. Select the signal type you want using the S-Video */SSM Component RGB ▲ button.
Name and Function of the Parts Name of the Remote Control Buttons TV/AV I/II MENU Use this button to enter the On Screen Display menu. EXIT Use this button to exit the On Screen */SSM */SSM (Sound Status Display menu. Memory) Use this button to select the sound tone. Press repeatedly to select Flat, Music, Movie, Speech, User sound tone. PR PR Able to OK VOL ( VOL VOL ( Able to PR ) Buttons change channel. ) Buttons adjust sound.
ENGLISH Name of the Remote Control Buttons SLEEP You period after which the TV / AV/ S-Video/Component should switch itself to standby. Press the key repeatedly to select the number PR OK VOL SLEEP Timer : can set time a of minutes. VOL OFF 10 20 30 240 180 120 90 60 PR LIST To Programme list display the programme : list (0~99).
Name and Function of the Parts Remote Control - PIP/POP/PBP function 1. Swap You Button swap the main screen and the sub-screen when the PIP/POP/PBP function is used. can PIP AUTO SWAP SWAP POP TEXT SLEEP MODE M UPDATE LIST SWAP TIME X PBP SIZE Q.VIEW MIX HOLD APC/PSM REVEAL 2. ? INDEX i : PIP in Picture) Button The sub-screen is changed in the order shown below. (Picture SMALL 3.
Remote Control - Using the Teletext function TEXT To select the teletext screen PR the last selected page appears on the together with an information headline and option line at the bottom of the screen. UPDATE OK VOL off. The main index or page an on or VOL PR Press the button to appear the TV programme. At the top of screen indicates that you are still in the teletext mode. Before interrupting teletext, you may select a page number.
Name and Function of the Parts Remote Control - Using the Teletext function MODE The mode will be switched in the Teletext mode. TIME When AUTO SWAP viewing a TV programme, press this button to display the time at the top right hand TEXT SLEEP MODE M UPDATE LIST TIME of the screen. press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the RED/GREEN, or NUMBER buttons.
Rear View ENGLISH Audio R Audio L S-Video AudioR L AudioR L Theft prevention locking Power Cord Connector COMPONENT : Y Y Pb Pr D ANT IN Pb Pr device DVI Connect the power cord Input Terminal Input D ANT IN Signal D-Sub PC Audio Connector Analogue Signal Connector Audio Jack :Connect to the TV Tuner Jack: Connect the antenna. Video PC Audio jack in the PC sound card.
Name and Function of the Parts Sound card Connection Terminal AudioR L Y Pb Pr ANT IN Input Terminal PC Audio PC Audio Jack Connect the audio cable to the - LINE OUT jack in the PC sound card. Connect the Component Connecting ? Make Cable the sound card output terminal connecting to the product. If the PC sound card supports both Speaker Out and Line Out, change it to Line Out by setting the jumper or the PC application. (For more details, refer to the sound card user's manual.
Connecting When First of Then, to External Devices Connecting to your PC all, see if the connect the computer, product and the peripherals are turned off. signal input cable and audio cable. A When connecting with the DVI B When connecting with the D-Sub Rear side of the signal input cable. signal input cable.
Connecting to External Devices Connect the power cord. Rear side of the * When product connecting to a wall outlet. Audio R Audio L S-Video AudioR L Turn on power by touching the Power On/Off Y Pb Pr ANT IN sensor on D PC Audio the product. Power On/Off Turn on the PC.
Select ENGLISH input signal. an Press the SOURCE button SOURCE on the remote control to select the input signal. OK Or, press the SOURCE button SOURCE at the front side of the product. AUTO/SELECT INPUT A TV/AV When ? B connecting with a signal input cable. TV Select DVI When ? DVI connecting AV with a D-Sub signal input I/II */SSM S-Video cable. Component Select RGB RGB DVI PR OK VOL VOL PR ? Note How to connect to two Connect the computers.
to External Devices Connecting When watching VCR Connect the video cable (See page shown in the below as connect the power cord A15). A When connecting with ? figure and then Connect the a RCA cable. input terminal with White, Sound (right) -- a proper color match.
When watching DVD C When connecting with Connect the ? input a Component terminal with cable and a ENGLISH Audio cable. proper color match. a Back of the Product AudioR L Y Pr Blue Gre n Red White Pb Red Component Cable (Not Included) Audio Cable (Not Included) White Gre n Red Blue Red DVD Select an input signal. Press the SOURCE button SOURCE on the remote control to select the input signal. OK Or, press the SOURCE button at the front side of the product.
Connecting When When to External Devices watching DVI-D(HDCP) from the DVD/Set-top BOX connecting the video/audio cable connect the power cord. (See [Rear page as shown in the below figure and then A15) side of the Product] PC Audio RCA/PC cable DVI-D cable WR [Set-top Box/DVD] Select an input signal. Press the SOURCE button SOURCE on ? input signal. OK Or, press the SOURCE button SOURCE the remote control to select the at the front side of the product.
Connecting When watching to External Devices TV See if the antenna cable is connected at the rear side of the product and then, connect the power cord. Rear side of the Product Audio R Audio L S-Video AudioR L Y Pb Pr D ANT IN PC Audio ANT IN Antenna Cable (Not Included) Select an input signal. Press the SOURCE button SOURCE on ? input signal. OK Or, press the SOURCE button SOURCE the remote control to select the at the front side of the product.
Connecting to External Devices To arrange the cables After the connecting the following figure. cables neatly, arrange the cables to the Cable Holder as shown in Aud LAudioR Audio L R Y Pb Pr ANT IN D Y Pb Pr ANT IN D PC Audio Cable Holder Push the back cap shown in the Back following figure. Cap Note For remove the back cap, Pull it shown in the following figure.
and Selecting the Screen Adjusting Name of the Buttons in the Screen SOURCE MENU < PR < < VOL > Adjustment Unit ENGLISH AUTO/SELECT PR ? Power Indicator Power On/Off OSD Select / Adjust lights up blue when the display operates normally(On Mode). If the display is in sleep (Energy Saving) mode, this indicator color changes to amber. Touch the Power On/Off ? On/Off sensor MENU Button This indicator sensor sensor again to turn to turn on the power. Touch the Power it off.
and Selecting the Screen Adjusting Name of the Buttons in the Screen [For AUTO/SELECT Button PC Adjustment Unit Analogue signal-RGB] optimal display change resolution to For 1280X1024 [Other signals] ? The current signal and mode information will be displayed.
OSD (On Screen Display) Icon Function menu ENGLISH Description Set/Select the channel when using the TV . STATION Adjusting Screen Color. Adjusting the audio function. Adjusting the time function. Selecting the PICTURE SOUND TIME options. SPECIAL Screen Adjustment. SCREEN Adjusting PIP/POP/PBP Mode (Multiple Screen) Functions. PIP/POP/PBP Note OSD(On Screen Display) The OSD function enables you to adjust graphical presentation.
and Selecting the Screen Adjusting adjust the OSD (On Screen Display) How to OK or PR PR PR PR OK OK OK screen MENU OK OK OK PR PR PR PR Pops the Move where up you want to menu a Move where icon you want to Select menu adjust screen Select menu adjust ? 1 Press the MENU 2 To 3 When the icon you want becomes 4 Use the 5 Accept 6 Exit the OSD access a control, use the changes by pressing by pressing set an menu adjust the OSD screen. of the OSD appears.
Set/Select the channel when using the TV ENGLISH Auto programme Favourite programme System Press the buttons to select the TV system of the country or the world from where you want to receive the TV channels. If you want to receive 'NTSC M channel, change the SYSTEM part of ' before launching an menu to 'M' automatic search.
and Selecting the Screen Adjusting Set/Select the channel when Name To It is assigned channel name. possible to change the name stored to TV channel which has not see a the numbers can be Press the buttons to Press OK/MENU Use the yet in the memory or to assign a name been entered. A name with up 5 letters or to the programme numbers 0 to 99. given buttons to select Search the TV using move cursor to be changed. number 0~9,and character.(space, button).
Adjusting Screen Color PSM TV/AV/Component/S-Video input only PSM Dynamic ACC Standard Mild Game User The PSM function automatically adjusts the screen image quality depending on the AV/TV usage environment. ? Dynamic : Select this ? ? ? ? option to display with a sharp image. Standard : The most general and natural screen display status. Mild : Select this option to display with a mild image.
and Selecting the Screen Adjusting Adjusting Screen Color CSM RGB / DVI PSM 6500K CSM 9300K ? User ? PSM 6500K CSM 9300K Contrast 50 Brightness 50 Red 50 Green 50 Blue 50 Adjusting input only 6500K/9300K Selecting a factory setting color set. 6500K: Slightly reddish white. 9300K: Slightly bluish white. User : Select this option to use the user-defined settings. Contrast To adjust the contrast of the Brightness To adjust the brightness User screen. of the screen.
the time function Adjusting ENGLISH TIME Clock Clock Off time On time Auto sleep This function is used to set up of current time. You must set the time correctly before using on/off timer function. 1) 2) 3) 4) 5) Press the MENU button and then Press the button and then use button to select the TIME button to select the Clock use Press button and then use button to set the Press button and then use button to set the Press button and then use button to set the menu. menu.
and Selecting Selecting the the Screen Adjusting options Input Child Lock Language Power Indicator Transparency Reset Input Input TV Child Lock AV If you press the button once, the following Input Signal Window will appear. Select the S-Video signal type you want using the button. Language Component Power Indicator RGB Transparency DVI Reset Child Lock Use the buttons to select ON or with the remote control.
Screen Adjustment ENGLISH SCREEN ARC Auto-configure Clock Phase Position To select the ARC image size of the screen.
and Selecting the Screen Adjusting Adjusting PIP/POP/PBP (To adjust the sub Mode (Multiple Screen) Functions screen) On/Off Off PIP PIP Input Size POP Image PBP Sound Position Swap On/Off PIP After selecting PIP in the PIP/POP/PBP On/Off menu, the following menu items can be adjusted. POP After selecting POP menu, the following in the PIP/POP/PBP On/Off menu items can be adjusted.
Adjusting PIP/POP/PBP Mode Position (Multiple Screen) To On/Off PIP adjust the position of PIP Functions ENGLISH screen. Input Size Image Sound Position Swap Swap To switch the main-screen and subscreen On/Off Off PIP Input in PIP/POP/PBP mode. On Size Image Sound Position Swap PIP SWAP POP SWAP PBP Note When the Interlaced signal, such as the Set-top Box, is inputted at the RGB and DVI source input level, the following will be shown.
Troubleshooting No Is the product is image power cord connected? ? displayed See if the power cord is outlet. properly connected to the Does the power indicator is turned on? ? See if the power switch is turned Power is on, power indicator is blue but the screen appears extremely dark.
The Is the screen screen image position wrong? ? looks abnormal. D-Sub analog signal -- the remote control to optimal screen mode. If Position ? Press the "AUTO" button in automatically select the status that fits into the current is not adjustment in OSD menu satisfactory, use the . See if the video card resolution and supported by the frequency are product. If the frequency is out of range, set to the recommended resolution in the Control Panel Display Setting menu.
Troubleshooting The audio function does not work. No sound? No sound is available when the PIP/POP/PBP mode is ? See if the audio cable is connected ? Adjust the ? See if the sound is set ? See if the sound is set to On in the PIP/POP/PBP engaged. properly. volume. properly. menu. Sound is too dull. ? Sound is too low. ? Select the Adjust the appropriate equalize sound. volume. The TV function does not work. The TV signal is not being received.
Specifications [17 inch] LCD Panel Video Signal Screen 17 inches (432.7 mm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 432.7 mm Type Pixel Pitch 0.264 Max.
Specifications [19 inch] LCD Panel Video Signal Screen 19 inches (481.9 mm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 481.9 mm Type Pixel Pitch 0.294 Max.
PC Mode -- Preset Mode [17, 19 inch] Preset mode 1234567 Horizontal Vertical Frequency (kHz) Frequency (Hz) Horizontal Frequency Frequency (kHz) (Hz) Preset mode VGA 640 x 350 31.469 70 8 VESA 1024 x 768 48.363 60 VGA 720 x 400 31.468 70 9 VESA 1024 x 768 60.123 75 VGA 640 x 480 31.469 60 10 MAC 1152 x 870 68.681 75 VESA 640 x 480 37.500 75 11 MAC 1152 x 900 61.805 66 VESA 800 x 600 37.879 60 12 VESA 1280 x 1024 63.
Specifications VESA wall VESA wall mounting mounting Connected to another object (stand type and wall-mounted type. This product accepts a VESA-compliant mounting interfacepad.optional) For further information, refer to the VESA Wall Mounting Instruction Guide. Theft prevention locking device Audio R Audio L S-Video Locking Use this Device locking cable (optional) to prevent theft.
ENGLISH DVI-D No. Signal T.M.D.S.Data2T.M.D.S.Data2+ 123456789 T. M. D. S. Data 2/4 Shield T.M.D.S.Data4T.M.D.S.Data4+ DDC Clock DDC Data Analogue Vertical Synchronization T.M.D.S.Data1- 10 T.M.D.S.Data1+ 11 T. M. D. S. Data 1/3 Shield 12 T.M.D.S.Data3- 13 T.M.D.S.Data3+ 14 +5V Power 15 16 Grounding (return for +5V, Hot Plug Detect 17 T.M.D.S.Data0- 18 T.M.D.S.Data0+ 19 T. M. D. S. Data 0/5 Shield 20 T.M.D.S.Data5- 21 T.M.D.S.Data5+ 22 T. M. D. S. Clock Shield 23 T. M. D. S.
