Owner's Manual

A36
ENGLISH
The screen
image
looks abnormal.
?
D-Sub
analog signal
--
Press the "AUTO" button in
the remote control to
automatically
select the
optimal
screen status that fits into the current
mode. If
adjustment
is not
satisfactory,
use the
Position menu in OSD .
?
See if the video card resolution and
frequency
are
supported by
the
product.
If the
frequency
is out of
range,
set to the recommended resolution in the
Control Panel
--
Display
--
Setting
menu.
?
D-Sub
analog signal
--
Press the "AUTO" button in
the remote control to
automatically
select an
optimal
screen status that fits into the current
mode. If
adjustment
is not
satisfactory,
use the
Clock menu in OSD.
?
D-Sub
analog signal
--
Press the "AUTO" button in
the remote control to
automatically
select an
optimal
screen status that fits into the current
mode. If
adjustment
is not
satisfactory,
use the
Phase menu in OSD.
?
If the screen size is not full when connected to the
PC,
execute the PIP/POP/PBP to
change
to full
screen mode.
?SeeiftheTVsoundissettomono.Ifitis,the
sound will not be
displayed.
?
You cannot
adjust brightness
in the PIP/POP/PBP
Screen menu for the sub-screen
among
PIP/POP/PBP menus.
Therefore,
brightness
can
be different for the sub-screen.
?
The
proper input signal
is not connected to the
signal port.
Connect the
signal
cable that matches
with the source
input signal.
Is the screen
position wrong?
Do thin lines
appear
on the
background
screen?
Horizontal noise
appears
or the
characters look blurred.
Screen size is
automatically adjusted
when connected to the PC.
No sound
appears
in the TV channel
display
window.
Brightness
differs in the main and
sub screen when connected to the
PC.
The screen is
displayed abnormally.