Table of Contents Installation and Connection Precautions Safety A1 Accessories Before A4 to the PC connecting A5 A6 Name and Function of the Parts Connecting to External Devices A14 to your PC A14 When Connecting When Watching When Watching DVI-D(HDCP) from the DVD/Set-top BOX When Watching A17 VCR / DVD A19 A20 TV A21 To arrange the cables Input Selection and Tracking Selecting and OSD (On How to Screen adjust Display) the OSD A22 the Screen Name of the Buttons i
Precautions Safety safety precautions carefully before using Please read these Warning If you ignore the warning message, you may be accident or death. Caution If you seriously injured or the product. there is a possibility of ignore the caution message, you may be slightly injured or the product may be damaged Precautions in installing the Product Warning Keep away from - Electrical heat like electrical heaters.
ENGLISH Electrical Power Related Precautions Warning Make - to connect the power cable to the You may be electrocuted or injured. current. grounded sure Use the rated - The voltage only. product can be damaged, During - a thunder or or you may be electrocuted. lightning storm, unplug You may be electrocuted or a fire can Do not connect several extension Use - the power cable cords, power bar with a grounding terminal A fire can break out due to overheating.
Precautions Safety Caution Do not shock the - You may Do not product when moving it. be electrocuted or the product can dispose the product-packing be damaged box. Use it when you move. Make the - panel face forward and hold it with both hands to move. If you drop the product, the damaged product can cause electric shock or fire. repair.
Accessories Please check the accessories in the * The product and the accessories Remote Control product package. can be different from the figures User's Guide/ Power Cord /Batteries D-Sub shown here. Driver CD/Cards Signal Polishing DVI-D Cable Cloth Signal Back Inserting Cable Audio Cable Cap RCA-PC Audio Cable batteries into remote control. 1. Take out the battery cap. 2. Insert the batteries with correct 3. Close the ? You and 30 polarity (+/-). battery cap.
Before Before Connecting to the PC setting up the product, ensure that the power to the product, the computer system, and other attached devices is turned off. Unfolding the stand Place the product with base its front facing downward on a Hold down the release button inside the stand and soft cloth. strongly pull out the stand with your two hands. The stand won't move if you don't press release button.
Name and Function of the Parts Name of the Remote Control Buttons Remote Control MUTE Use the this button so that no sound comes out temporarily. POWER Able to power On/Off. SOURCE TV/AV I/II INPUT SELECT If you press the button once, the following Input Signal TV AV1 Window will appear. Select the signal type you want using the AV2 */SSM S-Video RGB ▲ ▼ button.
Name and Function of the Parts Remote Control TV/AV I/II MENU Use this button to enter the On Screen Display menu. EXIT Use this button to exit the On Screen */SSM */SSM (Sound Status Display menu. Memory) Use this button to select the sound tone. Press repeatedly to select Flat, Music, Movie, Speech, User sound tone. PR PR OK VOL VOL PR ) Buttons Able to change channel. VOL ( ) Buttons Able to adjust sound. ( OK Button Use when functional adjustment is completed.
ENGLISH SLEEP You can set time a period after which the TV / AV1 / AV2 / S-Video should switch itself to PR standby. OK VOL SLEEP Timer : Press the key repeatedly to select the number OFF 10 20 30 240 180 120 90 of minutes. VOL 60 PR LIST To Programme list display the programme : list (0~99).
Name and Function of the Parts Remote Control - PIP/POP/PBP function 1. Swap You Button swap the main screen and the sub-screen when the PIP/POP/PBP function is used. can PIP AUTO SWAP SWAP POP TEXT SLEEP MODE M UPDATE LIST SWAP TIME X PBP SIZE Q.VIEW MIX HOLD APC/PSM REVEAL 2. ? INDEX i : PIP in Picture) Button The sub-screen is changed in the order shown below. (Picture SMALL 3.
Remote Control - Using the Teletext function TEXT To select the teletext screen PR the last selected page appears on the together with an information headline and option line at the bottom of the screen. UPDATE OK VOL off. The main index or page an on or VOL PR Press the button to appear the TV programme. At the top of screen indicates that you are still in the teletext mode. Before interrupting teletext, you may select a page number.
Name and Function of the Parts Remote Control - Using the Teletext function MODE The mode will be switched in the Teletext mode. TIME When AUTO SWAP viewing a TV programme, press this button to display the time at the top right hand TEXT SLEEP MODE M UPDATE LIST TIME of the screen. press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the RED/GREEN, or NUMBER buttons.
Rear View ENGLISH Audio R Audio L S-Video ANT IN D PC Audio ANT IN Theft prevention locking Power Cord Connector SCART Input/Output TV Tuner Jack DVI Signal D-Sub : D PC Audio device Connect the power cord Terminal : Connect the SCART CABLE Connect the antenna. : Connector Analogue Signal PC Audio Jack : Connector Connect to the jack in the PC sound card.
Name and Function of the Parts Sound card Connection Terminal Input Terminal PC ANT IN Audio PC Audio Jack Connect the audio cable to the - LINE OUT jack in the PC sound card. Connect the SCART CABLE Connecting ? Make the sound card output terminal connecting to the product. If the PC sound card supports both Speaker Out and Line Out, change it to Line Out by setting the jumper or the PC application. (For more details, refer to the sound card user's manual.
to External Devices Connecting When First of Then, Connecting to your PC all, see if the connect the computer, product and the peripherals are ENGLISH turned off. signal input cable and audio cable. A When connecting with the DVI B When connecting with the D-Sub C When connecting with the D-Sub signal input cable. signal input cable. (IBM compatible PC) signal input cable.
Connecting to External Devices Connect the power cord. Rear side of the * When product connecting to a wall outlet. Audio R Audio L S-Video ANT IN Turn on power by touching the Power On/Off sensor on PC Audio D the product. Power On/Off Turn on the PC.
Select ENGLISH input signal. an Press the SOURCE button SOURCE on input signal. OK Or, press the SOURCE button SOURCE TV/AV the remote control to select the at the front side of the product. AUTO/SELECT I/II */SSM A When ? connecting with a DVI signal input INPUT SELECT cable. Select DVI TV AV1 B When ? connecting with a D-Sub signal input cable. AV2 Select RGB S-Video PR RGB DVI OK VOL VOL PR ? Note How to connect to two Connect the computers.
to External Devices Connecting When watching Connect the video cable (See page / DVD VCR as shown in the below figure and then connect the power cord. A15) A When connecting with SCART cable. an PC ANT IN Audio Rear side of the Product SCART Cable * Please, (Not included) use shielded scart cable VCR / DVD B When connecting with ? Connect the an RCA cable. terminal with input Sound (right) Red) a proper color match.
C When ? connecting with Connect to the S-Video S-Video cable. an input terminal to watch high image quality movies. Red AUDIO Audio R R White OUT Audio L W RCA Cable (Not included) S-Video S-Video Cable VIDEO (Not included) OUT Rear side of the Product VCR / DVD Select an input signal. Press the SOURCE button SOURCE on SOURCE at the front side of the product. AUTO/SELECT I/II A When ? connecting with a SCART cable.
Connecting When When to External Devices watching DVI-D(HDCP) from the DVD/Set-top BOX connecting the video/audio cable connect the power cord. (See [Rear page as shown in the below figure and then A15) side of the Product] PC Audio RCA/PC cable DVI-D cable WR [Set-top Box/DVD] Select an input signal. Press the SOURCE button SOURCE on OK Or, press the SOURCE button SOURCE at the front side of the product.
Connecting When watching to External Devices TV See if the antenna cable is connected at the then, rear side of the product and connect the power cord. Rear side of the Product Audio R Audio L S-Video D ANT IN Antenna Cable ANT IN (Not Included) Select an input signal. Press the SOURCE button SOURCE on the remote control to select the OK Or, press the SOURCE button SOURCE at the front side of the product.
Connecting to External Devices To arrange the cables After the connecting the following figure. cables neatly, arrange the cables to the Cable Holder ANT IN PC Audio ANT IN Back shown in D Cable Holder D Push the back cap shown in the as following figure. Cap Note For remove the back cap, Pull it shown in the following figure.
and Selecting the Screen Adjusting Name of the Buttons in the Screen SOURCE MENU < PR < < VOL > Adjustment Unit ENGLISH AUTO/SELECT PR Power ? Indicator Power On/Off ? sensor MENU Button OSD Select / Adjust This indicator lights up blue when the display operates normally (On Mode). If the display is in sleep (Energy Saving) mode, this indicator colour changes to amber. Touch the Power On/Off sensor Touch the Power On/Off sensor to turn the power.
and Selecting the Screen Adjusting Name of the Buttons in the Screen [For AUTO/SELECT Button PC Adjustment Unit Analogue signal-RGB] Auto In progress [Other signals] ? The current signal displayed.
OSD (On Screen Display) Icon Function menu ENGLISH Description Set/Select the channel when using the TV . STATION Adjusting Screen Colour. Adjusting the audio function. Adjusting the timer function. Selecting the PICTURE SOUND TIMER options. SPECIAL Screen Adjustment. SCREEN Adjusting PIP/POP/PBP Mode (Multiple Screen) Functions. PIP/POP/PBP Note OSD(On Screen Display) The OSD function enables you to adjust graphical presentation.
and Selecting the Screen Adjusting adjust the OSD (On Screen Display) How to OK or PR PR PR PR OK OK OK screen MENU OK OK OK PR PR PR PR Pops the Move where up you want to menu a Move where icon you want to Select menu adjust screen Select menu adjust ? 1 Press the MENU 2 To 3 When the icon you want becomes 4 Use the 5 Accept 6 Exit the OSD access a control, use the changes by pressing by pressing set an menu adjust the OSD screen. of the OSD appears.
Set/Select the channel when using the TV ENGLISH Auto programme Favourite programme System Press the buttons to select the TV system of the country or the world from where you want to receive the TV channels. If you want to receive 'SECAM L' channel, change the SYSTEM 'L' before launching L: SECAM L/L BG I : DK : menu to automatic search. (France) PAL B/G, SECAM B/G PAL I/II : an part of (Europe/East Europe) (U.
and Selecting the Screen Adjusting Set/Select the channel when Name To It is assigned channel name. possible to change the name stored to TV channel which has not see a the numbers can be Press the buttons to Press OK/MENU Use the direction. yet in the memory or to assign a name been entered. A name with up 5 letters or to the programme numbers 0 to 99. given buttons to select Search using the TV move cursor to be changed. number 0~9,and character.(space, button).
Adjusting Screen Colour PSM TV/AV1/AV2/S-Video PSM Dynamic ACC Standard ENGLISH input only Mild Game User The PSM function automatically adjusts the screen image quality depending on the AV/TV usage environment. Dynamic : Select this option to display with a sharp image. Standard : The most general and natural screen display status. Mild : Select this option to display with a mild image.
and Selecting the Screen Adjusting Adjusting Screen Colour CSM RGB / DVI PSM 6500K CSM 9300K ? User ? PSM 6500K CSM 9300K Contrast 50 Brightness 50 Red 50 Green 50 Blue 50 Adjusting input only 6500K/9300K Selecting a factory setting colour set. 6500K: Slightly reddish white. 9300K: Slightly bluish white. User : Select this option to use the user-defined settings. Contrast To adjust the contrast of the Brightness To adjust the brightness User screen. of the screen.
Adjusting the timer function ENGLISH TIMER Clock Clock Off Timer On Timer Auto Off This function is used to set up of current time. You must set the time correctly before using on/off timer function. 1) 2) 3) 4) 5) Press the MENU button and then Press the button and then use button to select the TIMER button to select the Clock use Press button and then use button to set the Press button and then use button to set the Press button and then use button to set the menu. menu.
and Selecting the Selecting the Screen Adjusting options Input Child Lock Language Power Indicator Transparency Reset Input Input TV Child Lock AV1 If you press the button once, the following Input Signal Window will appear. Select the AV2 Language signal type you want using the button. S-Video Power Indicator RGB Transparency DVI Reset Child Lock Use the buttons to select ON or with the remote control.
Screen Adjustment ENGLISH SCREEN ARC Auto-configure Clock Phase Position To select the ARC image size of the screen.
and Selecting the Screen Adjusting Adjusting PIP/POP/PBP (To adjust the sub Mode (Multiple Screen) Functions screen) On/Off Off Source PIP Size POP Image PBP Sound Position Swap On/Off PIP After selecting PIP in the PIP/POP/PBP On/Off menu, the following menu items can be adjusted. POP After selecting POP in the PIP/POP/PBP On/Off menu, the following menu items can be adjusted. PBP After selecting PBP in the PIP/POP/PBP On/Off menu, the following menu items can be adjusted.
Adjusting PIP/POP/PBP Mode (Multiple Screen) Functions Position To On/Off adjust the position of PIP screen. Source Size Image Sound Position Swap Swap To switch the main-screen and subscreen On/Off Off in PIP/POP/PBP mode. Source On Size Image Sound Position Swap PIP SWAP POP SWAP PBP Note When the Interlace signal, such as the Set-top Box, is inputted at the RGB and DVI source input level, the following will be shown.
Troubleshooting No Is the product is image power cord connected? ? displayed See if the power cord is outlet. properly connected to the Does the power indicator is turned on? ? See if the power switch is turned Power is on, power indicator is blue but the screen appears extremely dark.
The Is the screen screen image position wrong? ? looks abnormal. D-Sub analog signal -- the remote control to optimal screen mode. If Position ? Press the "AUTO" button in automatically select the status that fits into the current is not adjustment in OSD menu satisfactory, use the . See if the video card resolution and supported by the frequency are product. If the frequency is out of range, set to the recommended resolution in the Control Panel Display Setting menu.
Troubleshooting The audio function does not work. No sound? No sound is available when the PIP/POP/PBP mode is ? See if the audio cable is connected ? Adjust the ? See if the sound is set ? See if the sound is set to On in the PIP/POP/PBP engaged. properly. volume. properly. menu. Sound is too dull. ? Sound is too low. ? Select the Adjust the appropriate equalize sound. volume. The TV function does not work. The TV signal is not being received.
Specifications [17 inch] LCD Panel Video Signal Screen 17 inches (431.8 mm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 431.8 mm Type Pixel Pitch 0.264 Max.
Specifications [19 inch] LCD Panel Video Signal Screen 19 inches (481.9 mm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 481.9 mm Type Pixel Pitch 0.294 Max.
[20.1 inch] LCD Panel Video Signal Screen 20.1 inches (510 mm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 510 mm Type Pixel Pitch 0.255 Max.
Specifications PC Mode -- Preset Mode [17, 19 inch] Preset mode Horizontal Vertical Frequency (kHz) Frequency (Hz) Horizontal VGA 640 x 350 31.469 70 2 VGA 720 x 400 31.468 70 89 3 VGA 640 x 480 31.469 60 4 VESA 640 x 480 37.500 5 VESA 800 x 600 6 VESA 800 x 7 MAC x 832 Frequency Frequency (kHz) (Hz) Preset mode 1 Vertical VESA 1024 x 768 48.363 60 VESA 1024 x 768 60.123 75 10 MAC 1152 x 870 68.681 75 75 11 MAC 1152 x 900 61.
VESA wall VESA wall mounting ENGLISH mounting Connected to another object (stand type and wall-mounted type. This product accepts a VESA-compliant mounting interfacepad.optional) For further information, refer to the VESA Wall Mounting Instruction Guide. Theft prevention locking device Audio R Audio L S-Video ANT IN Locking Use this PC Audio D Device locking cable (optional) to prevent theft.
Specifications DVI-D No. Signal T.M.D.S.Data2T.M.D.S.Data2+ 123456789 T. M. D. S. Data 2/4 Shield T.M.D.S.Data4T.M.D.S.Data4+ DDC Clock DDC Data Analogue Vertical Synchronization T.M.D.S.Data1- 10 T.M.D.S.Data1+ 11 T. M. D. S. Data 1/3 Shield 12 T.M.D.S.Data3- 13 T.M.D.S.Data3+ 14 +5V Power 15 16 Grounding (return for +5V, Hot Plug Detect 17 T.M.D.S.Data0- 18 T.M.D.S.Data0+ 19 T. M. D. S. Data 0/5 Shield 20 T.M.D.S.Data5- 21 T.M.D.S.Data5+ 22 T. M. D. S. Clock Shield 23 T. M.
