ENGLISH OWNER’S MANUAL LED LCD TV/ CINEMA 3D TV Please read this manual carefully before operating the your TV and retain it for future reference. LED LCD TV MODELS M1950D M2250D M2350D M2450D M2550D TV CINEMA 3D TV MODELS 3D TV DM2350D DM2350A www.lg.
TABLE OF CONTENTS ENGLISH CONTENTS 5 LICENSES 6 ASSEMBLING AND PREPARING 6 Unpacking 8 Parts and buttons 10 Lifting and moving the TV 10 Setting up the TV 10 - Attaching the Stand Base 10 - Detaching the Stand Base and Body 11 - Mounting on a table 12 - Tidying cables 12 - Mounting on a wall 14 REMOTE CONTROL 17 WATCHING TV 17 28 - Favourite programme setup 29 Using additional options 29 - Adjusting aspect ratio 31 - Using the input list 32 - On-screen menu language
TABLE OF CONTENTS - Selecting an sound mode 73 - HDMI connection 43 - Customizing sound options 73 - DVI to HDMI connection 74 - Component connection - Euro Scart connection 44 ENTERTAINMENT 74 44 Using integrated media features 75 Connecting to an audio system 44 - Connecting USB storage devices 75 - Digital optical audio connection 46 - Browsing files 75 - Headphone connection 47 - Viewing Photos 76 Connecting to a USB 48 - Listening to Music 50 - Viewing Movies 77 TELETE
TABLE OF CONTENTS ENGLISH 85 SPECIFICATIONS 94 IR CODES 95 EXTERNAL CONTROL DEVICE SETUP 95 RS-232C Setup 95 Type of connector; D-Sub 9-Pin Male 96 RS-232C configurations 97 Communication Parameters 97 Command reference list 98 Transmission / Receiving protocol
LICENSES 5 Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation.
ASSEMBLING AND PREPARING ENGLISH ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.
ASSEMBLING AND PREPARING 7 3D TV ENGLISH TriDef 3D Game Software CD / Quick Installation Guide 3D Glasses (Normal type) 3D Glasses (Clip type) CAUTION Do not use any pirated items to ensure the safety and product life span. yy Any damages or injuries by using pirated items are not covered by the warranty. yy NOTE The accessories supplied with your product may vary depending on the model.
ASSEMBLING AND PREPARING Parts and buttons ENGLISH M1950D M2250D M2350D M2450D M2550D TV PCMCIA Card Slot Power Indicator yyLighting On: Turned on yyLighting Off: Turned off Remote Control Sensor Touch Buttons Connection panel (See p.71) Touch button Description INPUT Changes the input source. MENU Accesses the main menus, or saves your input and exits the menus. OK Selects the highlighted menu option or confirms an input. ◄ VOL ► Adjusts the volume level.
ASSEMBLING AND PREPARING DM2350A 3D TV PCMCIA Card Slot (Only DTV) Power Indicator yyLighting On: Turned on yyLighting Off: Turned off Remote Control Sensor Touch Buttons 2 1 Connection panel (See p.71) Touch button Description INPUT Changes the input source. MENU Accesses the main menus, or saves your input and exits the menus. OK Selects the highlighted menu option or confirms an input. ◄ VOL ► Adjusts the volume level. ▼ PR ▲ Scrolls through the saved programmes.
ASSEMBLING AND PREPARING ENGLISH Lifting and moving the TV Setting up the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for save transportation regardless of its type and size. Attaching the Stand Base CAUTION Avoid touching the screen at all times, as this may result in damage to the screen or some of the pixels used to create images. It is recommended to move the TV in the yy box or packing material that the TV originally came in.
ASSEMBLING AND PREPARING 3 Remove 2 screws and pull out the Stand Body WARNING When you adjust the angle, do not hold the buttom of the TV frame as shown on the following illustration, as may injure your fingers. Mounting on a table 1 Lift and tilt the TV into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. Disconnect the power cord first, and then move or install the TV. Otherwise electric shock may occur.
ASSEMBLING AND PREPARING Using the Kensington security system ENGLISH The Kensington security system connector is located at the back of the TV. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com . Mounting on a wall For proper ventilation, allow a clearance of 10 cm on each side and from the wall.
ASSEMBLING AND PREPARING 5 Please use VESA standard as below. Model M1950D M2450D M2250D M2550D M2350D DM2350D DM2350A VESA (A x B) Standard screw Number of screws Wall mount bracket (optional) 75 x 75 M4 4 RW120 200 x 100 M4 4 RW240 CAUTION Disconnect the power cord first, and then yy move or install the TV. Otherwise electric shock may occur. If you install the TV on a ceiling or slanted yy wall, it may fall and result in severe injury.
REMOTE CONTROL ENGLISH REMOTE CONTROL The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. ENERGY TV / PC INPUT SAVING 1 2 4 5 6 7 8 0 9 LIST 3 Q.
REMOTE CONTROL ENERGY TV / PC 15 INPUT 1 2 4 5 6 7 8 0 9 LIST 3 Q.VIEW MARK FAV P 3D 3D TV P A G E MUTE MENU GUIDE BACK INFO Q.MENU OK EXIT Auto Config. (POWER) Turns the TV on or off. ENERGY SAVING (See p.60) Adjusts the brightness of the screen to reduce energy consumption. TV/PC Selects TV or PC mode. LIST (See p.28) Displays the programme table. MARK Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu.
REMOTE CONTROL ENERGY TV / PC INPUT TV/ RAD SAVING ENERGY TV / PC INPUT TV/ RAD SAVING ENGLISH 1 2 3 4 5 6 7 8 0 9 LIST Q.VIEW MARK FAV RATIO P P A G E MUTE MENU GUIDE BACK INFO 1 2 3 4 5 6 7 8 0 9 TV Q.MENU OK EXIT Auto Config. LIST Q.VIEW MARK FAV RATIO MENU (See p.58) Accesses the main menus or saves your input and exit menus. OK Selects menus or options and confirms your input.
WATCHING TV 17 Connecting an antenna or cable Connect an antenna, cable, or cable box to watch TV referring to the following. The illustrations may differ from the actual accessories and an RF cable is optional. Connecting with a cable box Connect the TV to a cable box and the cable box to a wall antenna socket with 2 RF cables (75 ohm). Connecting an antenna or basic cable Connect the TV to a wall antenna socket with an RF cable (75 ohm).
WATCHING TV ENGLISH Accessing the TV for the first time 4 Follow the on-screen instructions to customize your TV according to your preferences. When you access the TV for the first time, the initial setting screen appears. Select a language and customize the basic settings. Language Mode Setting 1 Connect the power cord to a power outlet. Selects a language for the display. Selects Home Use for the home environment. 2 Press on the TV to turn the TV on.
WATCHING TV Watching TV Managing programmes on the TV to turn the TV on. 2 Press INPUT and select Antenna. 3 Control the TV using the following buttons and menus while you are watching TV. Button / Menu ) or ) Description Scrolls through the saved programmes Numbers Selects a programme by entering numbers (+ , -) or VOL ( ) Adjusts the volume level MUTE Mutes all sounds PICTURE Selects one of the preset image modes (See p.60) AUDIO Selects one of the preset audio modes. (See p.
WATCHING TV Only for Finland, Sweden, Denmark and Norway ENGLISH DVB-C Auto Tuning is a menu for users in countries that support DVB cable. If you want to select the Antenna yy 1 Press MENU to access the main menus. If you want to select the Cable yy 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to SETUP and press OK. 3 Press the Navigation buttons to scroll to Auto Tuning and press OK.
WATCHING TV Acquired certification SO: Sweden(Comhem, yy Canal Digital), Denmark(YouSee, Canal Digital, Stofa), Norway(Canal Digital). If there are not any Service Operator that you want, select Other Operators. If you select "Other Operators", or the selected country supports "Other Operators" only, it may take some time to search all the channels, or it may not search some of the channels. If some of the channels do not appear, follow the steps below. 1. SETUP → Auto Tuning → Cable 2.
WATCHING TV ENGLISH Manually setting up programmes (In digital mode) (Only DTV) Manual Tuning lets you manually add a programme to your programme list. (For countries other than Finland, Sweden, Denmark and Norway & When selecting Antenna if Finland, Sweden, Denmark, Norway or “--”country is chosen) 1 Press MENU to access the Main menus. 2 Press the Navigation buttons to scroll to SETUP and press OK. 3 Press the Navigation buttons to scroll to Manual Tuning and press OK.
WATCHING TV Manual Tuning lets you manually tune and arrange the stations in whatever order you desire. 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to SETUP and press OK. 3 Press the Navigation buttons to scroll to Manual Tuning and press OK. 4 Press the Navigation buttons to scroll to TV and press OK.(Only DTV) 5 Press the Navigation buttons to scroll to System. 6 Press the Navigation buttons to scroll to V/UHF or Cable.
WATCHING TV ENGLISH Cable DTV Setting (In Cable mode only) (Only DTV) The range that a user can select from the Service Operator menu differs depending on number of Service Operator supported by each country, and if number of supported Service Operator for each country is 1, corresponding function becomes non-activation.
WATCHING TV In DTV/RADIO mode (Only DTV) 1 Press the Navigation buttons, scroll to the programme number you wish to skip. 2 Press the Blue button to skip the selected programme number. 3 Press the Blue button again to release. NOTE The skipped programmes are shown in yy blue on the programme list and these programmes will not appear on the screen when changing programmes using P( ) buttons during watching TV.
WATCHING TV Software Update (Only DTV) ENGLISH Software Update means software can be downloaded through the digital terrestrial broadcasting system. 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to SETUP and press OK. Select the Yes using the < > button and you yy will see the following picture. When the power is turned off, downloading yy starts. When the power is turned on while updating, the progress status is displayed. Software downloading progress. Ver. 03.
WATCHING TV Diagnostics (Only DTV) 1 Press MENU to access the main menus. CI [Common interface] Information (Only DTV) This function enables you to watch some encrypted services (pay services). If you remove the CI Module, you cannot watch pay services. When the module is inserted into the CI slot, you can access the module menu. To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CI module from the TV. This may cause a malfunction.
WATCHING TV Selecting the programme list ENGLISH You can check which programmes are stored in the memory by displaying the programme list. Displaying programme LIST 1 Press LIST to access the Programme List. 2 When you are finished, press MENU or EXIT. NOTE You may find some blue programmes. yy These have been set up to be skipped by auto programming or in the programme edit mode. Some programmes with the channel yy number shown in the programme LIST indicate there is no station name assigned.
WATCHING TV Using additional options Resize the image to view the image at its optimal size by pressing RATIO(Except 3D Model) or Q.MENU while you are watching TV. CAUTION If a fixed image displays on the screen for a yy long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty. If the aspect ratio is set to 4:3 for a long yy period of time, image burn may occur on the letterboxed area of the screen.
WATCHING TV ENGLISH - 4:3: The following selection will allow you to view a picture with an original 4:3 aspect ratio, gray bars will appear on both the left and right of the screen. - 14:9: You can view a picture format of 14:9 or a general TV programme in the 14:9 mode. The 14:9 screen is viewed in the same way as in 4:3, but is magnified to the left and right. - Cinema Zoom: Choose Cinema Zoom when you want to enlarge the picture in correct proportion.
WATCHING TV Using the input list 1 Press INPUT to access the input source list. - The connected device displays on each input source. 2 Press the Navigation buttons to scroll to one of the input sources and press OK.
WATCHING TV ENGLISH On-screen menu language / Country selection The installation guide menu appears on the TV screen when it is switched on for the first time. 1 Press the Navigation buttons to scroll to Desired Language and press OK. 2 Press the Navigation buttons to scroll to Country and press OK. If you want to change Language / Country selection 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to OPTION and press OK.
WATCHING TV The Audio function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played. Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed. When the languages you selected as the primary for Audio Language and Subtitle Language are not supported, you can select language in secondary category.
WATCHING TV Subtitle Language Selection ENGLISH When two or more subtitle languages are broadcast, you can select the subtitle language with the SUBTITLE button on the remote control. Press the Navigation buttons to select a subtitle language. Subtitle Language OSD Information Display Status Using the Lock options Locking the buttons on the TV. Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset.
WATCHING TV This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. A password is required to gain access to this menu. This set is programmed to remember which option it was last set to even if you switch the set off. Prevents children from watching certain adult’s TV programmes, according to the ratings limit set. Enter a password to watch a blocked programme.
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) (Only DTV)) ENGLISH EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) (ONLY DTV) This feature is not available for all model. yy Using Electronic Programme Guide This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services.
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) (Only DTV)) You can view a program being broadcasted and one scheduled to follow. Programme Guide 1 YLE TV1 NOW 1 YLE TV1 2 YLE TV2 4 TV.. 5 YLE FST 6 CNN 8 YLE24 6 Apr. 2007 15:09 ▲ ALL NEXT That ’70s show Keno Your World Today Legenen om Den.... Naturtimmen World Business Fantomen Kritiskt Lyssna ABC ▲ Favourite Information Pr.
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) (Only DTV)) ENGLISH Button Function in Extended Description Box Button or Yellow Button INFO BACK GUIDE Description Text Up/Down. Enter Timer Record/Remind setting mode. The detail information on or off. Switch off EPG. Button Function in Schedule List Mode If you’ve created a schedule list, a scheduled program is displayed at the scheduled time even when you are watching a different program at the time.
CONNECTING TO A PC PC HDMI OUT AV RGB IN (PC) HDMI/DVI IN USB IN RS-232C IN (CONTROL & SERVICE) DC-IN AUDIO IN (RGB/DVI) OPTICAL DIGITAL AUDIO OUT TV COMPONENT IN Y H/P PB PR L VIDEO R ANTENNA/ CABLE IN AUDIO PC HDMI OUT 3D TV DC-IN 1 AV RGB IN (PC) 2 USB IN RS-232C IN (CONTROL & SERVICE) It is recommended to use the TV with the yy HDMI connection for the best image quality.
CONNECTING TO A PC RGB connection Transmits the digital video signal from your PC to the TV. Connect the PC and the TV with the DVI to HDMI cable as shown the following illustrations. To transmit an audio signal, connect an optional audio cable. Transmits the analog video signal from your PC to the TV. Connect the PC and the TV with the D-sub 15 pin cable as shown the following illustrations. To transmit an audio signal, connect an optional audio cable.
CONNECTING TO A PC NOTE Adjusting the screen Selecting an image mode Display images in its optimized settings by selecting one of the preset image modes. 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to PICTURE and press OK. 3 Press the Navigation buttons to scroll to Picture Mode and press OK. 4 Press the Navigation buttons to scroll to an image mode you want and press OK.
CONNECTING TO A PC ENGLISH Customizing image options Customizing PC display options Customize basic and advanced options of each image mode for the best screen performance. Customize options of each image mode for the best image quality. This function works in the following mode: yy RGB[PC] mode. 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to PICTURE and press OK. 3 Press the Navigation buttons to scroll to Picture Mode and press OK.
CONNECTING TO A PC Customizing sound options Selecting an sound mode Customize options of each sound mode for the best sound quality. Play the sound in its optimized settings by selecting one of the preset sound modes. 1 Press MENU to access the main menus. 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to AUDIO and press OK. AUDIO and press OK. 3 Press the Navigation buttons to scroll to Sound Mode and press OK.
ENTERTAINMENT Using integrated media features To disconnect a USB storage device, make sure to end the connection properly to prevent damages to the TV or files. Connecting USB storage devices 1 Press Q.MENU to access the quick menus. Connect USB storage devices such as a USB flash memory, external hard drive, or MP3 player to the TV and use multimedia features (“Browsing files” See p.46). Connect a USB flash memory or USB memory card reader to the TV as shown on the following illustration.
ENTERTAINMENT Tips for using USB storage devices power source. We do not guarantee an USB cable for an external power source. Data in a USB storage device cannot be yy deleted in the NTFS file system. If your USB memory device has multiple yy partitions or if you use a USB multi-card reader, you can use up to 4 partitions or USB memory devices. Only the FAT, FAT16, FAT32 file system yy supports the delete function.
ENTERTAINMENT Browsing files 5 Press the Navigation buttons to browse files. ENGLISH The highlighted file will display in the preview window. Access the Photo, Music or Movie lists and browse files. 1 2 1 Connect a USB storage device. Photo List 2 Press the Navigation buttons to scroll to PHOTO LIST, MUSIC LIST or MOVIE LIST and press OK.
ENTERTAINMENT Viewing Photos 47 Using photo options Use the following options while viewing photos. 1 Press the Navigation buttons to scroll to USB and press OK. 2 Press the Navigation buttons to scroll to Photo List and press OK. ꔗ 3 Press the Navigation buttons to select Drive1 Slideshow to access the connected USB storage device. 5 Press the Navigation buttons to scroll to a file you want and press OK.
ENTERTAINMENT Q.MENU options for Photo List. ENGLISH 1 Press Q. MENU to access the Pop-Up menus. 2 Press the Navigation buttons to scroll to Set Photo View or Set Video, Set Audio and Press OK Choose Options. Set Photo View. Set Video. Set Audio. ꕉ Previous When you select the Set Photo View. 1 Press Q. MENU to access the Pop-Up menus. 2 Press the Navigation buttons to scroll to Slide Speed or Music Folder. Listening to Music 1 Press the Navigation buttons to scroll to USB and press OK.
ENTERTAINMENT 7 Control playback by using the following Button Description Stops playback Q.MENU options for Music List 1 Press Q. MENU to access the Pop-Up menus. 2 Press the Navigation buttons to scroll to Set Plays a music file Audio Play or Set Audio and Press OK. Pauses or resumes playback Skips to the next file Choose Options. Skips to the previous file Set Audio Play. Set Audio. ꕉ Previous NOTE A damaged or corrupted file will not play and yy the duration of the file display as 00:00.
ENTERTAINMENT Viewing Movies ENGLISH Play video files on the TV. Your TV displays all of the video files saved in a USB storage device. Movie (*.dat / *.mpg / *.mpeg / *.ts / *.trp yy / *.tp / *.vob/ *.mp4 / *.mkv / *.avi / *.divx) supporting file. Video format: DivX3.11, DivX4.12, DivX5. yy x, DivX6, Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid 1.10- beta-1/beta-2, Mpeg-1, Mpeg-2, Mpeg-4, H.
ENTERTAINMENT Max Resolution NOTE The image under the preview window will appear if you select a non-supported file. 7 Control playback by using the following 1920 x 1080 @ 30p yy buttons. 1 Press the Navigation buttons to scroll to USB and press OK. Button INFO Stops the playback 2 Press the Navigation buttons to scroll to Movie List and press OK. Plays a video 3 Select Drive1 to access the connected USB Pauses or resumes the playback storage device.
ENTERTAINMENT When you select the Set Video Play. ENGLISH Menu Picture Size Description Selects your desired picture format during movie play Audio Changes the Language Group of the Language audio/subtitle during movie play. or Subtitle Language When you select the Set Video. 1 Press the Navigation button to make appropriate adjustments. (See p.61) When you select the Set Audio, Adjusts the time synchronisation of the subtitle from -10 secs to +10 secs by steps of 0.5 secs during movie play.
ENTERTAINMENT DivX® VOD Guide In order to play purchased or rented DivX® VOD contents, you should register your device with 10 digit DivX registration code from your device at www.divx.com/vod. 1 Press MENU to access the USB menus. 2 Press the Navigation button to scroll to DivX Reg. Code and press OK. 3 View the registration code of your TV. DivX® VOD Deregistration You should deregister your device with 8 digit DivX deregistration code from your device at www.divx. com/vod.
3D IMAGING ENGLISH 3D IMAGING(ONLY 3D MODEL) 3D Technology This TV can display in 3D via 3D broadcasting or when the TV is connected to a compatible device, such as a Blu-ray 3D Player. The viewer must wear compatible 3D glasses in order to see these images in 3D format. NOTE After powering on the TV, a few seconds may be needed for your TV to calibrate. yy When watching digital TV in 3D imaging mode, TV out signals cannot be output through the SCART yy cable.
3D IMAGING Parents/guardians should TV children’s viewing of 3D images because they may not be used to the yy 3D viewing experience and lack knowledge on how to handle potential risks. When using 3D Glasses CAUTION Do not use the 3D glasses to replace your corrective glasses, sunglasses or protective goggles. yy Do not store the 3D glasses in hot or cold locations. yy Do not drop objects onto the 3D glasses. Do not drop or bend the glasses.
3D IMAGING ENGLISH 3D Imaging Viewing Range Viewing 3D Imaging TV size, viewing angle & other circumstances may change the viewing distance and the angle of view. 1 Play the video produced in 3D. 2 Press 3D. 3 Wear the 3D glasses. 1 4 Press the Navigation buttons to scroll the OK and press OK. 4 2 5 Press the Navigation buttons to scroll the shape and press OK. Mode 2D 3D Description Changed from 2D imaging to 3D imaging. 2D 3D Side by Side 3 Top & Bottom No.
3D IMAGING 57 3D Mode Setting Option 3D Picture Correction 2 Press the Navigation buttons to scroll to one of the 3D Depth following options and press OK 3D Viewpoint ◄ Left/Right ◄ ◄ Vivid ◄ 15 0 Picture Mode Close The available Programme settings are described in the following: Option Description 3D Picture Correction Select Left/Right or Right/Left. Select the screen with 3D video with better visibility.
CUSTOMIZING SETTINGS ENGLISH CUSTOMIZING SETTINGS Accessing main menus 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to one of the following menus and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. PICTURE (See p.60) Adjusts the image size, quality, or effect SETUP (See p.59) Sets up and edit programmes OPTION (See p.
CUSTOMIZING SETTINGS 59 Customizing settings Image shown may differ from your TV. yy SETUP 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to SETUP and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. Move OK Auto Tuning Manual Tuning Programme Edit Software Update : On Diagnostics CI Information Cable DTV Setting 4 When you are finished, press EXIT.
CUSTOMIZING SETTINGS Image shown may differ from your TV. yy PICTURE settings ENGLISH PICTURE 1 Press MENU to access the main menus. Move OK Aspect Ratio : 16:9 Picture Wizard Set 3D Video ꕊ Energy Saving : Off Picture Mode : Vivid ꔈBacklight 100 ꔈContrast 100 ꔈBrightness 70 ꔈSharpness 50 ꔈColour 45 ꔈTint 0 ꔈColour Temperature 0 ꔈAdvanced Control ꔈPicture Reset Screen 2 Press the Navigation buttons to scroll to PICTURE and press OK.
CUSTOMIZING SETTINGS Setting Description Selects one of the preset image or customizes options in each mode for the best TV screen performance. You are also able to customize advanced options of each mode. The available preset picture modes vary depending on the TV. Mode Screen (In RGB-PC Mode Only) Vivid Adjusts the video image for the retail environment by enhancing the contrast, brightness, Colour, and sharpness. Standard Adjusts the image for the normal environment.
CUSTOMIZING SETTINGS Advanced image options ENGLISH Setting Description Dynamic Contrast (Off/Low/High) Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. Dynamic Colour (Off/Low/High ) Adjusts screen colours so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid.
CUSTOMIZING SETTINGS AUDIO settings Image shown may differ from your TV. yy 2 Press the Navigation buttons to scroll to AUDIO and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK.
CUSTOMIZING SETTINGS ENGLISH Setting Description Digital Audio Out This function allows you to select your preferred Digital Audio Output. When Dolby Digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(Sony Philips Digital InterFace) output to Dolby Digital. If Auto is selected in the digital audio out menu when Dolby Digital is not available, SPDIF output will be PCM(Pulse-code modulation).
CUSTOMIZING SETTINGS 65 Stereo/Dual Reception (In Analogue Mode Only) 1 Press Q. MENU and press the Navigation to access the AUDIO and press OK. 2 Press the Navigation button to scroll to sound output and press OK. Broadcast Mono Stereo Dual On Screen Display MONO STEREO DUAL I , DUAL II , DUAL I + II Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of sound is improved.
CUSTOMIZING SETTINGS TIME settings Image shown may differ from your TV. yy ENGLISH TIME 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to TIME and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. Move Clock Off Time On Time Sleep Timer Automatic Standby OK : Off : Off : Off : 4 hours. - To return to the previous level, press BACK. 4 When you are finished, press EXIT.
CUSTOMIZING SETTINGS OPTION settings 67 Image shown may differ from your TV. yy 2 Press the Navigation buttons to scroll to OPTION and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK.
CUSTOMIZING SETTINGS LOCK settings Image shown may differ from your TV. yy ENGLISH LOCK 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to LOCK and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. Set Password Lock System key Lock MOVE OK : Off ꔈBlock Programme ꔈParental Guidance ꔈInput Block : On - To return to the previous level, press BACK. 4 When you are finished, press EXIT.
CUSTOMIZING SETTINGS 69 INPUT settings ENGLISH 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to INPUT and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. Image shown may differ from your TV.
CUSTOMIZING SETTINGS USB settings Image shown may differ from your TV. yy ENGLISH USB 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to USB and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. MOVE OK Photo List Music List Movie List Divx Reg. Code Deactivation - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK.
MAKING CONNECTIONS 71 Connect various external devices to the TV and switch input modes to select an external device. For more information about an external device’s connection, refer to the manual supplied with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, camcorders or cameras, gaming devices, and other external devices.
MAKING CONNECTIONS Connect various external devices to the ports on the TV’s back panel. ENGLISH 1 Find an external device you want to connect to your TV shown on the following illustration. 2 Check the connection type of the external device. 3 Go to the appropriate illustration and check the connection details. HD Receiver HDMI – See p.73 DVI – See p.73 Component – See p.74 Euro Scart – See p.74 DVD VCR HDMI – See p.73 DVI – See p.73 Component – See p.74 Euro Scart – See p.
MAKING CONNECTIONS Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an optional audio cable. HDMI connection DVI OUT Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown on the following illustration.
MAKING CONNECTIONS Euro Scart connection Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the component cable as shown on the following illustration. To display images by using progressive scan, make sure to use the component cable. Transmits the video and audio signals from an external device to the TV. Connect the external device and the TV with the Euro Scart cable as shown on the following illustration.
MAKING CONNECTIONS Connecting to an audio system Headphone connection NOTE TV AV RGB IN (PC) RS-232C IN (CONTROL & SERVICE) HDMI/DVI IN USB IN COMPONENT IN Y H/P DC-IN AUDIO IN (RGB/DVI) OPTICAL DIGITALAUDIO OUT If you use an external audio device instead yy of the built-in speaker, set the TV speaker feature to off (See p.63). Digital optical audio connection PB PR L VIDEO R ANTENNA/ CABLE IN AUDIO Transmits the digital audio signal from the TV to an external device.
MAKING CONNECTIONS Connecting to a USB AV RGB IN (PC) RS-232C IN (CONTROL & SERVICE) HDMI/DVI IN TV USB IN COMPONENT IN Y H/P DC-IN AUDIO IN (RGB/DVI) OPTICAL DIGITAL AUDIO OUT or PB PR L VIDEO R ANTENNA/ CABLE IN AUDIO AV RGB IN (PC) 1 3D TV USB IN RS-232C IN (CONTROL & SERVICE) OPTICAL DIGITAL AUDIO OUT DC-IN 2 AUDIO IN (RGB/DVI) or H/P ENGLISH Connect a USB storage device such as s USB flash memory, external hard drive, MP3 player or a USB memory card reader to the TV an
TELETEXT 77 This feature is not available in all countries. yy Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
TELETEXT Fastext Index ENGLISH The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. Page selection 1 Press the T.OPT button and then use the Navigation button to select menu. Display the index page. 2 You can select the pages which are colour Select the each index page. Time When viewing a TV programme, select this menu to display the time at the top right hand corner of the screen.
DIGITAL TELETEXT (ONLY DTV) 79 This function works in UK, Ireland only. yy The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext. You should select off in the subtitle language menu to display teletext by pressing the SUBTITLE button.
MAINTENANCE ENGLISH MAINTENANCE Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION Make sure to turn the power off and yy disconnect the power cord and all other cables first. When the TV is left unattended and unused yy for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. Screen and frame To remove dust, wipe the surface with a dry and soft cloth.
TROUBLESHOOTING 81 ENGLISH TROUBLESHOOTING General The operation does not work normally. Problem The remote control doesn’t work Power is suddenly turned off Resolution yy Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control yy Ensure that the batteries are installed with correct polarity ( to , to ). yy Ensure that the correct remote operating mode is set: TV, VCR, etc. yy Install new batteries.
TROUBLESHOOTING Problem ENGLISH No picture when connecting HDMI Resolution yy Check that your HDMI cable is High Speed HDMI Cable. If the HDMI cables are not High Speed HDMI Cable, flickering or no screen display can result. Please use the High Speed HDMI Cable. The audio function does not work. Problem Resolution (+ , -) button or VOL ( , ) button. yy Press the yy Sound muted? Press MUTE button. yy Try another channel. The problem may be with the broadcast.
TROUBLESHOOTING 83 ‘Unknown Product’ message appears when the product is connected. Did you install the driver? Resolution yy Install the product driver, which is provided with the product, or download it from the web site. (http://www.lg.com) yy See if the plug & play function is supported by referring to the video card user’s guide. After-image appears on the product. Problem After-image appears when the product is turned off.
TROUBLESHOOTING WHEN USING 3D MODE ENGLISH TROUBLESHOOTING WHEN USING 3D MODE I can see a swirling oil-like pattern on the TV when the TV is turned off. This is caused by the interference of external light in the air layer between the LCD surface and 3D filter. The pattern becomes almost invisible when you turn on the power again. I cannot see 3D image properly Problem Resolution If you are not using the glasses provided with the TV.
SPECIFICATIONS M1950D LCD Panel Screen Type 470.1 mm Wide (18.51 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 470.1 mm Pixel Pitch 0.3 mm (H) x 0.3 mm (V) Video Signal Max. Resolution 1360 x 768 @ 60 Hz Recommended Resolution 1360 x 768 @ 60 Hz Horizontal Frequency 30 kHz to 61 kHz Vertical Frequency 56 Hz to 75 Hz Synchronization Type Separate Sync, Digital Input Connector TV, D-Sub Analog, SCART, PC Audio In, Component, HDMI Power Rated Voltage 19 V 2.
SPECIFICATIONS M2250D ENGLISH LCD Panel Screen Type 546.86 mm Wide (21.53 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 546.86 mm Pixel Pitch 0.248 mm (H) x 0.248 mm (V) Video Signal Max.
SPECIFICATIONS 87 M2350D Screen Type 584.2 mm Wide (23 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 584.2 mm Pixel Pitch 0.265 mm (H) x 0.265 mm (V) Video Signal Max. Resolution 1920 × 1080 @ 60 Hz Recommended Resolution 1920 × 1080 @ 60 Hz Horizontal Frequency 30 kHz to 83 kHz Vertical Frequency 56 Hz to 75 Hz Synchronization Type Separate Sync, Digital Input Connector TV, D-Sub Analog, SCART, PC Audio In, Component, HDMI Power Rated Voltage 19 V 2.
SPECIFICATIONS DM2350D DM2350A ENGLISH LCD Panel Screen Type 584.2 mm Wide (23 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 584.2 mm Pixel Pitch 0.265 mm (H) x 0.265 mm (V) Video Signal Max.
SPECIFICATIONS 89 M2450D Screen Type 609.7 mm Wide (24 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 609.7 mm Pixel Pitch 0.276 mm (H) x 0.276 mm (V) Video Signal Max. Resolution 1920 × 1080 @ 60 Hz Recommended Resolution 1920 × 1080 @ 60 Hz Horizontal Frequency 30 kHz to 83 kHz Vertical Frequency 56 Hz to 75 Hz Synchronization Type Separate Sync, Digital Input Connector TV, D-Sub Analog, SCART, PC Audio In, Component, HDMI Power Rated Voltage 19 V 2.
SPECIFICATIONS M2550D ENGLISH LCD Panel Screen Type 634.4 mm Wide (25 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 634.4 mm Pixel Pitch 0.288 mm (H) x 0.288 mm (V) Video Signal Max.
SPECIFICATIONS HDMI (PC) supported mode M1950D M1950D Resolution Horizontal Vertical Frequency(kHz) Frequency(Hz) Resolution Horizontal Vertical Frequency(kHz) Frequency(Hz) 640 x 480 31.469 59.940 720 x 400 31.468 70.080 640 x 480 37.500 75.000 640 x 480 31.469 59.940 800 x 600 37.879 60.317 640 x 480 37.500 75.000 800 x 600 46.875 75.000 800 x 600 37.879 60.317 1024 x 768 48.363 60.004 800 x 600 46.875 75.000 1024 x 768 60.023 75.029 1024 x 768 48.363 60.
SPECIFICATIONS HDMI (DTV) supported mode ENGLISH Resolution Horizontal Vertical Frequency(kHz) Frequency(Hz) 720 x 480 31.469 31.500 59.940 60.000 720 x 576 31.250 50.000 1280 x 720 37.500 50.000 1280 x 720 44.960 45.000 59.940 60.000 1920 x 1080 33.720 33.750 59.940 60.000 1920 x 1080 28.125 50.000 1920 x 1080 27.000 24.000 1920 x 1080 33.750 30.000 1920 x 1080 56.250 50.000 1920 x 1080 67.430 67.500 59.940 60.
SPECIFICATIONS 93 3D video input format supported. (Only 3D Model) Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Playable 3D video format 720p 1280 x 720 45 60 Top & Bottom, Side by Side 89.9 90 59.94 60 HDMI Frame Packing 37.5 50 Top & Bottom, Side by Side 75 1080i HDMI 1080p 1920 x 1080 1920 x 1080 HDMI Frame Packing 33.75 60 Top & Bottom, Side by Side 28.125 50 67.50 60 Top & Bottom, Side by Side, Checker Board, Single Frame Sequential 56.
IR CODES IR CODES ENGLISH This feature is not available for all models. yy Code (Hexa) Function 95 Energy Saving ( 08 (POWER) ) Note R/C BUTTON R/C BUTTON (POWER ON/OFF) 50 TV / PC R/C BUTTON 0B INPUT R/C BUTTON 79 RATIO R/C BUTTON F0 TV/RAD R/C BUTTON 45 Q.
EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Type of connector; D-Sub 9-Pin Male 1 5 6 9 RS-232C IN (CONTROL & SERVICE) RS-232C IN (CONTROL & SERVICE) No.
EXTERNAL CONTROL DEVICE SETUP RS-232C configurations Set ID ENGLISH Set ID number. "Real Data Mapping" on See p.102 7-Wire Configuration (Serial female-female NULL modem cable) PC Image shown may differ from your TV.
EXTERNAL CONTROL DEVICE SETUP 97 Communication Parameters ENGLISH Baud rate: 9600 bps (UART) yy Data length: 8 bits yy Parity : None yy Stop bit: 1 bit yy Communication code: ASCII code yy Use a crossed (reverse) cable. yy Command reference list DATA (Hexadecimal) COMMAND1 COMMAND2 01. Power k a 00 to 01 02. Aspect Ratio x c See p.99 03. Screen Mute k d 00 to 01 04. Volume Mute k e 00 to 01 05. Volume Control k f 00 to 64 06. Contrast k g 00 to 64 07.
EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving protocol ENGLISH Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV.(j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the set ID to choose desired TV ID number in option menu. Adjustment range is 1 to 99. When selecting Set ID ‘0’, every connected set is controlled.
EXTERNAL CONTROL DEVICE SETUP 01. Power (Command: k a) To control Power On/Off of the set. Data 00: Power Off Data 01: Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] To show Power On/Off. Transmission [k][a][ ][Set ID][ ][FF][Cr] Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] *Similarly, if other functions transmit ‘0xFF’ data based on this format, Acknowledgement data feed back presents status about each function. *OK Ack., Error Ack.
EXTERNAL CONTROL DEVICE SETUP ENGLISH 07. Brightness (Command: k h) To adjust screen brightness. You can also adjust brightness in the PICTURE menu. Transmission [k][h][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 * Refer to ‘Real data mapping ’. See p.102 11. OSD Select (Command: k l) To select OSD (On Screen Display) on/off when controlling remotely.
EXTERNAL CONTROL DEVICE SETUP Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 * Refer to ‘Real data mapping ’. See p.102 Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x] Transmission [x][u][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 * Refer to ‘Real data mapping ’. See p.102 Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x] 17. Energy Saving (Command: j q) To reduce the power consumption of the TV. You can also adjust Energy Saving in OPTION menu.
EXTERNAL CONTROL DEVICE SETUP 20. Programme Add/Skip (Command: m b) To set skip status for the current Programme. ENGLISH Transmission [m][b][ ][Set ID][ ][Data][Cr] Data 00 : Skip 21. Key (Command: m c) To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] 01 : Add Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x] Data Min : 00 to Max : 64 * Data Key cod -See p.
EXTERNAL CONTROL DEVICE SETUP 24. 3D(Command: x t) (only 3D model) To change 3D mode for TV. 103 25. Extended 3D(Command: x v) (only 3D model) To change 3D mode for TV.
UK Only
Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service.
