Owner’s Manual
Table Of Contents
- OWNER’S MANUAL
- PREPARATION
- FRONT PANEL CONTROLS
- BACK PANEL INFORMATION
- STAND INSTALLATION
- DETACHING STAND
- DETACHING STAND BODY
- WALL MOUNT: HORIZONTAL INSTALLATION
- DESKTOP PEDESTAL INSTALLATION
- SWIVEL STAND(Only M2762D/M2762DP)
- POSITIONING YOUR DISPLAY
- LOCATION
- SECURING THE SET TO THE WALL TO PREVENT FALLINGWHEN THE SET IS USED ON A STAND(Only M2762D/M2762DP)
- ATTACHING THE TV TO A DESK (Only M2762D/M2762DP)
- KENSINGTON SECURITY SYSTEM
- EXTERNAL EQUIPMENT SETUP
- WATCHING TV / CHANNEL CONTROL
- PICTURE CONTROL
- SOUND CONTROL
- TIME SETTING
- OPTION SETTING
- PARENTAL CONTROL / RATINGS
- APPENDIX
86
APPENDIX
IR CODES
A
Configuration of frame
1st frame
Repeat frame
A
Lead code
A
Repeat code
A
BBiitt ddeessccrriippttiioonn
A
FFrraammee iinntteerrvvaall:: TTff
The waveform is transmitted as long as a key is depressed.
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
Lead code Low custom code High custom code Data code Data code
Repeat code
Tf
4.5 ms
9 ms
2.25 ms
9 ms
0.55 ms
0.56 ms
1.12 ms
0.56 ms
2.24 ms
Tf Tf
Tf=108ms @455 kHz
Bit ”0” Bit ”1”
1. How to Connect
A
Connect your wired remote control to the Remote Control port on the set.
2. Remote Control IR Codes
A
Output waveform
Single pulse, modulated with 37.917 kHz signal at 455 kHz
T1
Tc
Carrier frequency
FCAR = 1/TC = fOSC/12
Duty ratio = T1/TC = 1/3