Precautions Safety Please read these safety precautions carefully before using Warning If you ignore the warning message, you may be accident or death. Caution If you seriously injured or the there is product. a possibility of ignore the caution message, you may be slightly injured or the product may be damaged Precautions in installing the Product Warning Keep away from - Electrical heat Keep the packing - sources like electrical heaters.
Precautions Safety Electrical Power Related Precautions Warning Make - sure to connect the power cable to the You may be electrocuted or grounded current. injured. Use the rated - The voltage only. product can be damaged, During - a thunder or or you may be electrocuted. lightning storm, unplug the power cable or signal You may be electrocuted or a fire can Do not connect several extension cable. break out.
Precautions Safety Caution Do not shock the - product when moving it. or the product can You may be electrocuted Do not dispose the product-packing be damaged box. Use it when you move. Make the - panel face forward and hold it with both hands to move. drop the product, the damaged product can cause electric shock or fire. repair.
Using the Remote Control Name of the Remote Control Buttons ? Power On/Off Button ? Mute button Sleep Button When watching AV/S-Video/RGB/HDMI Component1/ Component2 The product will be automatically turned off after a certain period of time. Press this button repetitively to select an appropriate time duration ? ? AV Button ? Input Select Button (See next page) ? ? Menu Button ? Exit Button ? - ? Volume ? Button PSM Button Automatically adjusts the image.
Using the ? Remote Control AV Button ? Each time you press the button it will change to Input Input Select Button AV If you press the button once, the following Input Signal HDMI/DVI Window will appear. Select the signal type you want Component1 RGB Component2 using the button. INPUT Inserting batteries into remote control. 1. Take out the battery cap. 2. Insert the batteries with correct 3.
To arrange cables in order * Applicable only for 1. models that Disassemble the stand up on the base as cover. shown in the Stand The cover may be easily disassembled by pressing figure. cover 2. After connecting the cables, stand. If support the stand securely connected, correctly position the stand cover you will hear the latch click into A6 into the holes place.
Connecting the Speakers * Applicable only for Use the screws in the below to models that secure the support the speakers speakers on the rear side of the product as shown figure. When the A7 speaker is installed.
Name and Function of the Parts * The product image in the user's could be different from the actual guide image.
Connecting to External When First of Then, Devices Connecting to your PC all, see if the connect the computer, product and the peripherals signal input are turned off. cable. A When connecting with the D-Sub signal input cable. B When connecting with the HDMI to DVI signal input cable (not included). A RGB IN PC Rear side of the product. PC/MAC MAC Macintosh Adapter (not included) Use the standard Macintosh adapter adapter since is available in the market.
Connecting to External 1 Turn on power by pressing the power button on Devices the product. Power button 2 Turn Select on an the PC. input signal. Press the INPUT button INPUT the remote control to select the on SET Or, press the INPUT button INPUT A When ? B at the front side of the product. AUTO/SET INPUT INPUT connecting with a D-Sub signal input cable. : 15-pin D-Sub analog signal. Select RGB When ? input signal.
Connecting to External RGB Watching Use this function when ? To Devices Outputs displaying ANALOG RGB inputs of a PC to the other product. different use Connect one connector of products connected to each other signal input cable(15-pin D-Sub Signal Cable) to the RGB OUT 1 product and connect the other end to the RGB IN connector of other end of the products.
Connecting to External When watching VCR / DVD Connect the video cable cord A (See When ? Devices page as shown in the below figure and then connect the power A9). connecting with a BNC cable. input terminal with a B When connecting with ? proper color match. watch high image quality S-Video cable. input terminal to movies.
Connecting to External When watching HDTV/DVD(480p/576p/720p/1080i/480i/576i) Connect the video/audio cable power cord ? Devices (See Connect the A page as shown in the below figure and then, connect the A9). input terminal with a proper color match.
Connecting to External When from the watching HDMI/DVI/RGB (480p/576p/720p/1080i) Connect the video/audio cable power cord (See page as HDMI/DVI IN RGB IN VCR/DVD/Set-top Box shown in the below figure Product Product AUDIO HDMI/DVI IN RGB IN (RGB/DVI) AUDIO (RGB/DVI) RGB OUT B RCA-PC Signal Cable (not included) VCR/DVD/Set-top Box on INPUT ? B ? RCA-PC Cable Audio Cable VCR/DVD/Set-top Box connecting with connecting with the remote control to select the at the front side
Connecting to External Devices Watching AV Outputs ? When you set the you're watching input signal to the AV of the main screen as 'AV (CVBS)', you can transmit the signal that output terminal.
Attaching the product to a wall * ? Applicable only for models that Set it up close to the wall so the The instructions shown below is fall over will also the when it is pulled support the stand product a doesn't fall over safer way to set up the in the forward direction. It will when it is product, pushed backwards. which is to fix it on the wall so the product doesn't prevent the product from falling forward and hurting people.
Selecting and Adjusting the Screen Name of the Buttons in the Screen Power Button ? Press this button to turn on Adjustment Unit the power. Press this button again to turn it off. ? Power Indicator ? MENU Button Adjust lights up green when the display operates normally(on mode). If the display is in sleep (Energy Saving) mode, this indicator color changes to amber. Use this button to show/hide the OSD (On Screen Display) menu screen.
Selecting and Adjusting the Screen Name of the Buttons in the Screen [For AUTO/SET Button PC Adjustment Unit Analog signal] Auto in progress For opimal display change resolution to 1360 X 768 XGA Mode is active and 1360 X768 is selected] [When INPUT INPUT Button Select the ? AUTO/SET AV Component 1 Component 2 RGB HDMI/DVI IR Receiver ? INPUT input signal Composite Video, Separate Video HDTV, DVD HDTV, DVD 15-pin D-Sub analog signal Digital signal The unit that receives the A18 sign
Selecting and Adjusting the Screen OSD Menu Icon Function Adjusts screen brightness, Description contrast and color that you prefer. PICTURE Adjusts the audio function. Adjusts the timer function. Adjusts the screen status Adjusts the screen video. SOUND TIMER according to the circumstances. SPECIAL SCREEN Note OSD(On Screen Display) The OSD function enables you to adjust graphical presentation.
Selecting and Adjusting the Screen adjust the OSD (On Screen Display) How to Pops the Move where up a Move where icon you want to Select you want to menu menu adjust screen Select menu Press the MENU Button, then the main menu To 3 When the icon you want becomes highlighted, 4 Use the adjust 5 Accept 6 Exit the OSD access a How to set an control, use the Buttons to changes by pressing by pressing screen. the item to the desired level. the SET Button.
Selecting and Adjusting the Screen Adjusting Screen Color PSM CSM Advanced Reset PSM The PSM function automatically adjusts the screen image quality depending on the AV usage environment. Dynamic : Select this option to display with a sharp image. Standard : The most general and natural screen display status. Mild : Select this option to display with a mild image. User1,2 : Select this option to use the user-defined settings.
Selecting and Adjusting the Screen Adjusting Screen Color XD XD is LG Electronics an advanced unique picture improving technology digital signal processing algorithm. It's not available to This menu use this function in RGB-PC is activated after selecting PSM the User1 to display a real HD or HDMI/DVI PC modes. or User2 of PSM. source through Auto Manual CSM XD Contrast On Advanced XD Colour Reset On XD NR Off 0 MPEG NR ? Auto ? Manual : XD is automatically change to Auto.
Selecting and Adjusting the Screen Adjusting the audio function SSM AVL Balance 0 Speaker SSM The best sound tone quality will be automatically depending on the video type that you're currently watching. Surround MAX SSM AVL selected Flat Balance Music 0 Movie Speaker Sports User ? Surround MAX with the ? ? ? ? ? dynamic : Set the Surround MAX surround effects. It will on.
Selecting and Adjusting the Screen Adjusting the timer function Clock Off time On time Auto Clock If the time is 1) 2) 3) 4) on the clock is reset the clock incorrect, Press the MENU button and then sleep manually. button to select the TIME use Press the button and then use button to select the Clock Press the button and then use button to set the Press the button and then use button to set the menu. menu. hour(00~23). minutes(00~59).
Selecting and Adjusting the Screen Selecting the options Language Child lock ISM Method Set ID Tile Mode Power Indicator Logo light Demo Language Child lock To choose the Use the language in which the control buttons to select On or with the remote control. This feature In order to lock the OSD In order to unlock ISM Method on Off. The Set can can displayed. be set up so that it can only be used prevent unauthorized viewing. set the Child lock tab to the 'On' position.
Selecting and Adjusting the Screen Selecting ? To - - use the options this function Must be displayed Must be in a with various other function that can products. be connected to RS-232C RGB Out or Tile mode Tile ID 0 also used with several ISM Method H-Size 0 view Set ID V-Size 0 screen.
Selecting and Adjusting the Screen Selecting - Tile mode the options (product 1 9) : r(3) ~ x c(3) row - ID1 ID2 ID3 ID4 ID5 ID6 ID7 ID8 ID9 Tile mode (product 1 column 2) : r(2) x c(1) ~ row ID1 ID2 column - Tile mode (product 1 ~16): r(4) x c(4) row ID1 ID2 ID3 ID4 ID5 ID6 ID7 ID8 ID9 ID10 ID 11 ID 12 ID 13 ID 14 ID 15 ID 16 column A27
Selecting and Adjusting the Screen the Selecting options Tile Mode Child lock Tile ID 0 ISM Method H-Size 0 Set ID V-Size 0 Tile Mode H-Position Power Indicator V-Position Logo light Reset Demo ? Select the location of the Tile Tile ID ?HSize Off Language Adjust the To set by setting horizontal size of the an ID. taking screen into account the size of the bezel. Adjust the vertical ?VSize Power Indicator H-Position Moving the screen position horizontally.
Selecting and Adjusting the Screen Adjusting Screen CLOCK/PHASE Auto and Position config. Manual config. XGA Mode ARC Reset Auto-config. (RGB PC input only) This button is for the automatic Manual- If the picture isn't clear after auto adjustment and especially trembling, adjust the picture phase manually. config. This function is suitable for * It's not available to use adjustment of the screen position, analogue signal input only. clock and that characters phase.
Selecting and Adjusting the Screen Adjusting Screen CLOCK/PHASE ARC To select the image Spectacle size of the and Position screen. When your AV receives the wide screen signal, it will lead you to adjust the picture horizontally, in a nonlinear proportion, to fill the entire screen. When your AV receives the wide screen signal, it will lead you to adjust the picture horizontally or vertically, in a linear proportion, to fill the entire Full screen version fully.
Troubleshooting No Is the product is image power cord connected? ? displayed See if the power cord is properly connected to the outlet. Is the power indicator light on? Power is on, power indicator is green but the screen appears extremely dark. the power indicator amber? ? ? ? See if the power switch is turned Adjust brightness If the product mouse or Does the 'Out of range' message ? The is in power press any on. again. saving mode, move the key.
Is the screen position wrong? ? D-Sub analog signal -- the remote control to optimal screen mode. If ? status that fits into the current adjustment Position OSD Press the "AUTO" button in automatically select the is not satisfactory, use the menu. See if the video card resolution and supported by the product. If the frequency are frequency is out of range, set to the recommended resolution in the Control Panel Display Setting menu.
No sound? ? See if the audio cable is connected ? Adjust the volume. ? See if the sound is set ? Select the properly. properly. appropriate equalize sound. Sound is too dull. ? Adjust the volume. Sound is too low. Screen has poor color resolution ? (16 colors). Set the number of colors to Select Control Panel Table Screen color is unstable or mono- ? colored. Do black more than 24 bits (true color) menu -- Display -- Settings -- Color in Windows.
Specifications The product specifications LCD Panel can change without prior notice for product improvement. 32 inches (80.04 cm) TFT (Thin Film Transistor) (Liquid Crystal Display) Panel Visible diagonal size: 80.04 cm 0.5025 mm (Pixel Pitch) [32 inch] LCD 37 inches (94.03 cm) TFT (Thin Film Transistor) (Liquid Crystal Display) Panel Visible diagonal size: 94.03 cm 0.6000 mm (Pixel Pitch) [37 inch] LCD 42 inches (106.
Specifications The product specifications improvement. can change without notice for product [2] [1] Dimensions prior &Weight H H W D W D [4] [3] H H D W Width x Height x D W Depth [32 inch] [1] 80.30 cm [2] 80.30 cm [3] 96.40 cm [4] 96.40 cm (31.61 inches) x 54.00cm (21.26 inches) x 18.00 cm (7.09 inches) (31.61 inches) x 49.30 cm (19.4 inches) x 9.99 cm (3.93 inches) (37.95 inches) x 54.00cm (21.26 inches) x 18.00 cm (7.09 inches) (37.95 inches) x 49.30 cm (19.4 inches) x 9.
Specifications The product specifications improvement. Dimensions &Weight can change without prior notice for product Net [32 inch] [1] 19.4 kg (42.77 lbs) [3] 21.1 kg (46.52 lbs) [2] [4] 16.0 17.7 kg (35.27 lbs) kg (39.02 lbs) [37 inch] [1] 26.1 kg (57.54 lbs) [3] 30.5 kg (67.24 lbs) [2] 22.0kg (48.50 lbs) [4] 25.7 kg (56.66 lbs) [42 inch] [1] 35.2 kg (77.60 lbs) [3] 38.0 kg (83.77 lbs) [2] 30.8 kg (67.90 lbs) [4] 33.6 kg (74.
Specifications 32/37/42 inch model The product specifications improvement. Video can change Max.
Specifications PC Mode -- Preset Mode Preset mode Horizontal Vertical Frequency (kHz) Frequency (Hz) Horizontal Vertical Frequency Frequency (Hz) (kHz) Preset mode 1 VGA 640 x 350 31.469 70 11 VESA 1024 x 768 60.123 75 2 VGA 720 x 400 31.468 70 12 VESA 1024 x 768 68.68 85 3 VGA 640 x 480 31.469 60 13 VESA 1280 x 720 44.772 60 4 VESA 640 x 480 37.500 75 14 VESA 1360 x 768 47.72 60 5 VESA 640 x 480 43.269 85 15 VESA 1280 x 1024 63.
Specifications VESA wall mounting Connected to another object (stand type and wall-mounted type.) This product accepts a compliant mounting pad.- (This has to be purchased separately if required.) For further information, refer to the VESA Wall Mounting Instruction Guide. interface Kensington Security Slot- (This has to separately if required.
