Owner's Manual

10
Timer Function
With the TIMER function you can have the radio
reception, CD play, TAPE play and USB play
turned on and off at the desired time.
1. Press CLOCK to check the current time.
(If you don’t set clock, the timer function
doesn’t work.)
2.
Press TIMER to enter the timer setting
mode.
If you want to correct the previously
memorized TIMER setting, press and hold
the TIMER for more than 2 seconds.
- The previous memorized time and “ ”
indicator appear in the display window.
3. Each function (TUNER t CD t USB t
TAPE) flashes in the display window in turn.
Press SET when the desired function is
flashing.
4. a. 1) When you select the TUNER function,
‘PLAY’ and ‘REC’ indicator flash in the
display window alternately for about 3
seconds.
‘PLAY’ indicator : TUNER play only
‘REC’ indicator : TUNER play and
recording
2) Press SET when the desired function
is flashing.
3)
Select the previous memorized preset
number with MULTI JOG and press
SET.
- ‘ON TIME’ indicator appears for about
0.5 seconds in the display window
and then disappears.
b.
When you select the CD, TAPE or USB
function,
- ‘ON TIME’ indicator appears for about
0.5 seconds in the display window and
then disappears.
5. Set the hour to switch on by turning
MULTI JOG on the front panel.
6. Press SET to confirm the hour to switch on.
7. Set the minute to switch on by turning
MULTI JOG on the front panel.
8. Press SET to confirm the minute to switch on.
- ‘OFF TIME’ indicator appears for about 0.5
seconds in the display window and then
disappears.
9. Set the hour to switch off by turning
MULTI JOG on the front panel.
10.Press SET to confirm the hour to switch off.
11. Set the minute to switch off by turning
MULTI JOG on the front panel.
12.Press SET.
13.Adjust the volume level by turning
MULTI JOG on the front panel.
14.Press SET.
“ ” appears in the display window and the
timer setting has been completed.
15.Switch the system off.
The selected function is automatically
switched on and off at the time set.
To cancel or check the timer
Each time the TIMER is pressed, you can select
the timer set or cancel. You can also check the
timer setting status.
To activate or check the timer, press the TIMER
so that
“” appears in the display window.
To cancel the TIMER, press the TIMER so that
“ ” disappears in the display window.