Owner's Manual

title
title
title titleInstallation
13
Operation
Tape Playback
Use only normal tapes.
Basic Playback
1. Press TAPE (or FUNCTION) to select TAPE
function.
(“NO TAPE” appears in the display window.)
2. Load a tape.
3. Press PLAY (
BB
or
bb
: OPTIONAL).
To Stop Play
Press STOP(
xx
) during playback.
To Play Rewind or Fast Forward
After pressing bb/BB on the front panel or on
the remote control during playback or stop, press
PLAY(
BB
) at the point you want.
AUTO STOP DECK (TAPE 1/2)
After auto stop deck plays only the front side, the
unit stops automatically.
AUTO REVERSE DECK (TAPE2)- OPTIONAL
You can select the direction of the cassette you
want by pressing PLAY MODE.
Dubbing
This function shows how to record from tape to
tape.
1. Press TAPE (or FUNCTION) to select tape
function.
• Cassette TAPE 1- Insert a playback tape to
dub.
• Cassette TAPE 2- Insert a blank tape.
2. Press NOR. DUBB./ HI-DUBB. as shown
below.
To stop dubbing, press STOP(
xx
).
Tape Recording
Wind the tape to the point recording starts.
Use only normal tapes.
Basic Setting
1. Select a function you want to record except
tape function.
2. Open the cassette TAPE 2 and insert a blank
cassette into the cassette compartment.
To set the recording direction: OPTIONAL
Press the PLAY MODE repeatedly to set the
recording direction.
General Recording
1. Press REC
zz
/ PAUSE
[[]]
on the front panel or
z/
[]
on the remote control.
- “REC” flashes and holds the cassette in
pause mode.
2. Press REC
zz
/ PAUSE
[[]]
on the front panel or
z/
[]
on the remote control again, then press
PLAY (
BB
or
bb
: OPTIONAL) to start playing
the source you want to record.
The recording begins.
To pause recording
Press z/
[]
during recording.
- “REC” flashes in the display window.
To stop recording
Press STOP(
xx
).
CD to Tape Synchronized Recording
The CD synchro recording function dubs a com-
plete CD and programmed titles automatically
into a cassette.
1. Press CD and load a disc you want to
record.
2. Press CD SYNC. in stop mode.
“REC” flashes and “CD SYNC” indicator
lights.
3. The synchronized recording is started
automatically after about 8 seconds.
Notes:
• If you wish to record from the desired track,
select the desired track with CD SKIP/
SEARCH (. bb/BB >) before com-
mencing CD synchro recording.
• You cannot change any mode during
recording.
Display Function
NOR DUBB Normal speed dubbing
HI DUBB Double speed dubbing
Function
After the cassette TAPE 2 plays the front
or reverse (backward play) side, stops
automatically.
After
the cassette TAPE 2 plays the front
and reverse side, stops automatically.
After the cassette TAPE 2 plays six times
repeatedly the front and reverse side,
stops automatically.
Display