Owner's Manual
14
CD Playback
Basic Playback
1. Press CD (or FUNCTION) to select CD func-
tion. If no disc is loaded then “NO DISC” is
displayed.
2. Press Z OPEN/ CLOSE and place the disc
into the disc tray.
The disc on the left (DISC 1) is played first.
Note:
To load an 8cm (3 inch) disc, put it onto the inner
circle of the tray.
3. Press Z OPEN/ CLOSE to close the disc
compartment.
Audio CD : “READING” appears in the dis-
play window, and then the total
number of tracks and the playing
time are displayed.
MP3/ WMA CD : “READING” appears in the
display window, and then
the total number of files is
displayed.
4. Press PLAY (
BB
) on the front panel or PLAY/
PAUSE (
BB
/
[[]]
)
on the remote control
.
In addition, you can also play an Audio CD or
MP3 CD using the NUMERIC buttons.
Pause Playback
Press
CD
[[]]
on the front panel or PLAY/ PAUSE
(
BB
/
[[]]
) on the remote control during playback.
Press this button again to resume play.
Stop Playback
Press STOP(
xx
) on the front panel or CD STOP(
xx
)
on the remote control during playback.
Skipping a Track
• Turn MULTI JOG on the front panel to select
the track you want.
• Press BB> on the remote control to go to
the next track.
• When the .bb on the remote control is
pressed once midway through a track, the
player returns to the start of that track. When it
is pressed again, a track is skipped each time
the button is pressed.
Searching a Track
Press bb/BB on the front panel, and then press
once more at the point you want.
Or hold .bb/BB> on the remote control
during playback, then release at the point you
want.
Note:
This function is only available to play an Audio CD.
To go to the next discs
Press DISC SKIP or D.SKIP during playing or
stopping.
To select a disc directly
Press DISC 1, DISC 2 or DISC 3 during playing
or stopping.
When you press DISC 1-3 before playing a disc,
the unit will automatically start playing the select-
ed disc.
To exchange discs during playback
You can open the disc tray while playing a disc to
check what discs are to be played next and
exchange discs, without interrupting playback of
the current disc.
1. Press Z OPEN/ CLOSE.
The disc tray is opened. Two disc compart-
ments appear. Even if the unit is playing a
disc, it doesn’t stop playing.
2. Replace discs in the compartments with other
ones.
The unit plays the disc in the left compart-
ment after the current disc, and then the one
in the right compartment.
3. Press Z OPEN/ CLOSE.
The CD door closes.
Notes:
• Do not place more than one disc on one disc
tray at the same time.
• Do not push on the disc tray to close CD door,
you may damage the unit.
RANDOM
Press RANDOM on the remote control during
playback. The tracks/ files on the CD/ MP3/
WMA/ USB will all play in random order.
“RANDOM” appears in the display window.
To cancel it, press RANDOM again.
With the label side upDISC 1